Used Machine Tools in Bavaria, Germany

Trusted Seller
GEKA Bendicrop 50
- Manufacturer: Geka
- Model: Bendicrop 50
Standard equipment: - Knife set for flat steel - Complete knife set for angle steel shears - Complete normal punching equipment - Quick release device for punches up to 31 mm - Support table for punching device, ...
Günzburg, Germany
Trusted Seller
AK-BEND AHS 20/10
- Manufacturer: Ak-Bend
- Model: AHS 2010
- Power requirement: 7.5 kW
Accessories / equipment: - Conical bending device - induction hardened rolls - digital display for side rollers - Machine made of steel construction - Separate control panel - two speeds - all rollers on ball bea...
Günzburg, Germany
2006 Mori Seiki NL2500MC/1250
- Manufacturer: Mori Seiki
- Model: NL-2500MC/1250
- Spindle bore: 82 mm
- Power requirement: 28 kW
Control: MSX-850III | Travel: X-260 mm, Z-1,345 mm; | Max. turning length: 1.298 mm | Turning diameter: 356 mm | Swing diameter: 755 mm | Standard turning diameter: 275 mm | Rod diameter: 80 mm | Rapid: 30 m/min...
Nördlingen, Germany
Trusted Seller
BURNET CFM 2100 x 4,0
- Manufacturer: BURNET
- Maximum thickness: 2 mm
- Power requirement: 7.5 kW
Standard equipment: - All-steel welded construction with static and dynamic frame rigidity frame rigidity - Direct drive with brake motor - Specially alloyed cutting blades - 750 mm motorized, digitally adjusted ...
Günzburg, Germany
2014 Hwacheon Hi-Tech 200 Bl
- Manufacturer: Hwacheon
- Model: Hi-Tech 200
Very good condition! Available immediately! Control: Fanuc Oi - TD | Travel: X-195 mm, Z-660 mm | Programmable tailstock: via M function | Turning diameter: 254 mm | Tool turret: 12x | Coolant tank : 180L, 6 bar...
Nördlingen, Germany
Trusted Seller
2024 DMG MORI CLX 450 TC 89-001638
- Manufacturer: DMG Mori
- Model: CLX 450
- Spindle bore: 102 mm
DMG MORI CLX 450 TC - Used Machine in Like-New Condition For sale is a DMG MORI CLX 450 TC with Siemens 840 DSL control in like-new condition. This high-performance turning and milling center impresses with its e...
Olching, Germany
Trusted Seller
ERCOLINA SB48 EDT PLUS-M
- Manufacturer: Ercolina
- Model: SB48
- Power requirement: 1.5 kW
Control: Other - | Storage location: Factory | Freight basis: Delivery ex works. | Bending speed: 2U/min | Total power requirement: 1,5kW | Weight of the machine approx.: 110kg | Dimensions of the machine approx...
Günzburg, Germany
Trusted Seller
AK-BEND -APK 50
- Manufacturer: Ak-Bend
- Power requirement: 1.1 kW
Domestic equipments: - Special steel shafts (42CrMo4) hardened and ground - a set of standard rollers - lower rollers up and down hydraulically deliverable - digital display for lower rollers - separate control p...
Günzburg, Germany
Trusted Seller
ZOPF ZB 140/3H2
- Manufacturer: Zopf
- Power requirement: 7.5 kW
Domestic equipments: - Direct drive of all three shafts - Single delivery of the side rollers - Horizontally and vertically usable - Hydraulically movable side rectifier (via control panel) - 2 digital displays f...
Günzburg, Germany
Trusted Seller
1980 VOEST DA 180
- Manufacturer: Voestalpine
- Model: DA 180
Control: conventional - | Storage location: Günzburg | Freight basis: Delivery ex warehouse Günzburg | Turning diameter over bed: 230mm | Turning diameter over slide: 120mm | Center distance: 800mm | Spindle spe...
Günzburg, Germany
Trusted Seller
AMADA GPN 425
- Manufacturer: Amada
- Model: GPN-425
- Maximum thickness: 4 mm
Control: Amada | Storage location: Günzburg | Freight basis: Delivery ex warehouse Günzburg. | Sheet width: 2500mm | Plate thickness: 4mm | Weight of the machine approx.: 5000kg | Dimensions of the machine appro...
Günzburg, Germany
Trusted Seller
ROLLMAK ST3 220-30/6.0
- Manufacturer: ROLLMAK
- Power requirement: 2.2 kW
Equipment: - Taper bending device - Swing-out top roller - Motorized up and down movement of the rear roller, Up and down movement of the lower rollers by handwheel - St-52 steel construction housing - Separate f...
Günzburg, Germany
Trusted Seller
ROLLMAK SME 140-20/4.5
- Manufacturer: ROLLMAK
- Power requirement: 2.2 kW
Control: conventional - | Storage location: Günzburg | Freight basis: Delivery ex warehouse Günzburg. | Sheet width: 2050mm | Plate thickness: 4.5mm | Pre-bending: 4.0 | Volt: 400V | Frequency range: 50Hz | Minu...
Günzburg, Germany
Trusted Seller
1971 WEINBRENNER T 3,5
- Manufacturer: Weinbrenner
- Maximum thickness: 3.5 mm
Control: conventional - | Storage location: Günzburg | Freight basis: Delivery ex warehouse Günzburg. | Sheet width: 2550mm | Plate thickness: 3,5mm | Range l-w-h: 3200x1300x1400mm | Weight of the machine approx...
Günzburg, Germany
Trusted Seller
1994 ATLANTIC XTSL 4006
- Manufacturer: Haco - Atlantic
- Maximum thickness: 6 mm
- Power requirement: 16 kW
Control: NC - | Storage location: Location | Freight basis: Delivery ex location. | Sheet width: 4000mm | Plate thickness: 6mm | Distance between columns: 4010mm | Machine weight.: 7.500kg | Total power requirem...
Günzburg, Germany