- Trusted Seller
Mettler Toledo XC CC
- Manufacturer: Mettler - Toledo
Resolution (max. recommended) 60,000d Ingress Protection IP65 Material Frame: Mild steel powder coated; Load plate: Stainless steel AISI304 Load Plate Surface Ra <= 0,8µm (welding lines excluded) Cable Length 2,5...
- Trusted Seller
1996 BTU TCA52-3-36E24
- Manufacturer: BTU
2000° F Electrical Reqs; 480v 15 Amp KVA 12 Machine type: Ovens | Machine location: Massachusetts | Stock #: 798304
- Trusted Seller
Tindall 772
- Manufacturer: Tindall
Set Up for 32oz containers Machine type: Filling Machines | Machine location: Massachusetts | Stock #: 705630 | Air requirements: 10 CFM at 60 PSI | Fill control: Capable of 6Oz to 6LB with no container no fill f...
- Trusted Seller
2018 ELGi EN15-125
- Manufacturer: ELGi
– 20 HP Machine type: Air Compressors | Machine location: North Carolina | Stock #: 869112 | – hours: 768 hrs. | – pressure rating: 125 psi | – capacity: 68 CFM | – motor: 15 kW | – voltage: 480/230v 3 phase/ 60H...
- Trusted Seller
1992 Johnston PFTA-250-4LG-15S
- Manufacturer: Johnston
250 HP Low Pressure Steam Boiler 440 Volt Machine type: Boilers | Machine location: Missouri | Stock #: 835551
- Trusted Seller
2007 Prime Mover OE35
- Manufacturer: Prime mover
- Model: OE35
Capacity 3000 LBS Machine type: Forklifts | Machine location: North Carolina | Stock #: 858114 | A: 225″ | B: 24″ | C: 24″
- Trusted Seller
2018 FEMA – Italian Cutting Systems (Italy) GIOTTO
- Manufacturer: FEMA – Italian Cutting Systems (Italy)
Equipment Overview High-performance FEMA EVO 1.1 horizontal cutting system designed for slicing large foam blocks with speed and precision. Built in 2018, the system features dual blade configurations and a motor...
- Trusted Seller
2023 Despatch TFD3‑10
- Manufacturer: Despatch
Specs Weight: ~3,070 lb (shipping: ~3,270 lb) Installed Options Class A flammable solvent handling package (NFPA 86 compliant) Protocol 3™ programmable controller with Ethernet/Modbus and USB data logging Truck w...
- Trusted Seller
2023 JPW C98TULEP480V45KW
- Manufacturer: JPW
Oven Model #C2-83-139TULEP480V45-60KW The Conveyor oven is designed to operate at 200°C maximum temperature and includes the following special features: 4.5” thick insulated walls, ceiling and floor · CRS e...
- Trusted Seller
2024 TPS DCI-966-G-F4T
- Manufacturer: TPS
Machine type: Ovens | Machine location: Upon Request | Stock #: 431952 | Temperature limit: 316 °C (600 °F) | Power input: 480V / 3 Phase / 60 Hz | Full load amps (fla): 43 A | Recommended fuse: 60 A | Largest m...
- Trusted Seller
American Isostatic Presses, Inc AE22-1.5SH
- Manufacturer: American Isostatic Presses, Inc
-Graphite Elements -Stoke Pump -Currently disassembled and stored in Storage Container, cannot set up for demo, sold as-is. -Was used for non-oxide ceramics
- Trusted Seller
2022 Italvacuum E1S
- Manufacturer: Italvacuum
Pressure Ratings Jacket (Camicia): Vessel (Recipiente): Temperature Ratings
- Trusted Seller
2012 Reliant Finishing System FD75-PB
- Manufacturer: Reliant Finishing System
Gas Pressure: 8x20x10 Machine type: Ovens | Machine location: Nevada | Stock #: 835713 | Heat exchanger make/model: Reliant / PWDR Booth | Application: Paint Booth | Fuel: Natural Gas | Gas high fire rate: 750 MB...
- Trusted Seller
2003 JPW C2-83-139TULEP480V45-60KW,
- Manufacturer: JPW
General Specifications: Conveyor oven is designed to operate at 150°C maximum temperature and includes the following special features: · 4.5” thick insulated walls, ceiling and floor · CRS exterior painted machin...
- Trusted Seller
2022 ArgonHT HE3OVEN
- Manufacturer: ArgonHT
- Power requirement: 21 kW
Machine type: Ovens | Machine location: California | Stock #: 834285 | Power requirement: 21KW | Heating resistance power: 1x18KW | Maximum panel size: 25.60″ x 25.60″ | Minimum panel size: 9.85″ x 9.85″ | Volum...
Excel PP-76ST Shrink Wrapping Machine
- Manufacturer: Excel
- Model: PP-76ST
Good condition Excel PP-76ST Shrink Wrapping Machines. Located in USA and other countries. Click request price for more information.
USA
Tip: Enter manufacturer, model or keyword
