Used Processing in Ontario, Canada

1514 Liter Tank on legs

• Manufacturer: Lightnin

-Lightnin mixer: model is MD-24, 3/4 HP, 1725 RPM, 575 Volts, 1.38 AMPS -Shipping dimensions: 58” diameter x 98” height -Tank is 400 us gallon -Diameter of tank is 48” -400 us gallons -Cone bottom

7,169 Litres steel tank

-Tank dimensions: 145" tall x 62" -Cone bottom with a 3" drain -Top with lid -On steel legs

54 Litres stainless tank on cart

• Manufacturer: Robroy Industries

-Shipping dimensions: length 57" x width 28" x height 82" -Tank dimensions: diameter 12" x height 30" -Stainless steel cart -Stainless vessel with removable lid -Max allowable workable pressure:100 PSI at 300 deg...

32,136 Litres Stainless Steel Tank

-Supported with 4 legs -Dome bottom -Flat top -304 stainless steel -7069 IMP Gallons -Tank is 232" tall with the legs 273" tall

50,006 liters Insulated stainless steel tank

-Flat bottom -Dome top -Flange on side is 1.5" -Tank Dimensions: 200" tall x 145" diameter Shipping dimensions with it laying down: -Length: 20.2 ft -Height: 10.5 ft -Approximate weight: 8,500 pounds

Fuji Ring Compressor

• Manufacturer: Fuji Electric

-Shipping Dimensions: 12" length x 12" width x 12" height -Input/output: 1.5" -3 phase -2 Poles -50/60 Hz -575 Volts -Output Hp: 1.1 -Max Amps 1.3 -Max H2O: 54.5 -Max CFM 98

Chicago Pneumatic CPX 20 refrigerated air dryer

• Manufacturer: Chicago Pneumatic
• Model: CPX20

-Shipping dimensions: Height 33" x Width 18 1/2" x Length 26" -1 Phase -Voltage 115 (230) -Frequency (Hz) 60 -Working pressure: 16 bar -Max pressure: 16 bar -Refrigerant type: R513A -Max inlet temp: 55 C -Max amb...

940 Litres stationary tank

-Open top with lid -Stationary with fork lift accessible flat bottom -Diameter is 32.5" -Height is 47.5" -207 IMP

Lightnin Mixer

• Manufacturer: Lightnin

Model:N33G-33, HP:1/3, Volt:115, Phase:1, RPM:1725,

922 Liter Horizontal Tank

• Manufacturer: Sharpsville Container

-203 IG -MAWP 100 psi @250 F -MDMT -20 F @ 100 psi -9" from the ground to the bottom -64" tall -Certified by Sharpsville container

5 HP Scott Hammer Mill

-Shipping dimensions: length 49" x width 40" x height 30" -Model: Sh18-12 -5 HP -208-230/460 Volts -15-23.2/6.6 AMPS -1725 RPM -3 phase

Food grade mixer

-Food grade -Mixer model: W-600 -220V -3 Phase -60HZ

Pneumatic Accessory

• Manufacturer: Norgren Excelon

-Shipping dimensions: 3" L x 3" W x 8 1/2" H -Input/output: 1/2" -Inlet: 250 PSIG, 17 Bar max

Pneumatic Accessory

• Manufacturer: Norgren Excelon

-Shipping dimensions: 3" L x 3" W x 8 1/2" H -Input/output: 1/2" -Inlet: 250 PSIG, 17 Bar max

Pall filter housing

• Manufacturer: Pall

part number MDA4463GN8H13 Shipping dimensions: Height - 10" x Width - 6" x Length - 6"