Used Processing in Belgium

2008 Cartridge dust collector ESTA, 36 000 m³/h

Engine: 55 kW, 400 V, 50 Hz, typ MDV-55, seriel number 08003130 With 27 cartridges made of polyester needle felt With compressed air cleaning With control board With silencer 1 recuperation cone and pneumatic dus...

Dust collector LÜHR ± 80 000 m³/h

• Manufacturer: Lühr

Type: MWF2.5 / 4.0 / 2.0Year of construction: 1981Estimated weight: ± 25 000 kgDimensions: 9500 mm x 4400 mm x 8850 mmEngine LOHER, type A315M1A4, 132 kW, 1485 rpm, 380 V.With chimney ± 21 m, Ø 1300 mmWith podium...

1986 Dust collector BMD Garant, 42 000 m³/h

• Manufacturer: BMD

Engine: 55 kW, 400 V, 50 Hz, type: GTFSL, 1470 rpm For dust, maximum 130 ° Celsius with automatic fresh air flap (prevents overheating) Mobile blower for cleaning the filter hoses, 0,18 kW Throttle valve, Ø 710 m...

Moulding unit HWS/HSP1, hydraulic 500mm x 400mm

Serial number: 10502Year of construction: 1992Weight: ± 22 000 kgDimensions: 2700 mm x 2000 mm x 2700 mmPower: 400V, 50 Hz32 molding boxes = 16 pairsDimensions of boxes: 500 mm x 400 mm x 150/150 mmWith transport...

Shake out grid, 2100 mm x 1170 mm

External dimensions: length 2460 mm, width 1500 mm, height 800 mm On 16 springs (spiral springs) Imbalance axle

Flat loading band with cleats, 4900 mm x 600 mm

External dimensions: length 6600 mm, width 1150 mm, height 2000 mm With two sides emergency rip cord

2000 Push-out furnace INDUCTOTHERM, 200 kW, 1000 Hz, 200 kg

One push-out for crucible 200 kg, type A200 1x VIP power desk and power track, type R 1x pump sttaion 1x cooling tower with closed circuit With hydraulic ( with non flammable oil substitut ) push and emergency ha...

Hydraulic unit, 3 kW

Engine: 3 kW, 24 V,165 Amp. brand: HAGGLUNDS, type: MTL9-7A, 3250 rpm, serial number: 1213378 With hand valve ' lever up -motot start and oel press , lever down oil return - lower

Camera with endoscope KS TOOLS

In black box Endoscope lens Ø 8,5 mm Weight: ± 5 kg | Dimensions: length 370 mm, width 290 mm, height 70 mm

1999 Dust collector NEOTECHNIK, 93 000 m³/h

With silencer 528 filter bags (pockets) PE 178, 550 g/m² With extraction screw and rotary valve Control board SIEMENS S7-300, renewed i, 2009-2013 With blind clap for summer - winter operation With additional fin...

2003 Rotary table shot blast machine RÖSSLER, Ø 1000 mm

1 turbine, 11 kW With control board Dimensions: length 3925 mm, width 3300 mm, height 3700 mm | Engine: 16 kW, 400 V, 50 Hz, serial number 31757/03 | Table ø: 1000 mm | Useful height: 400 mm

Shake-out grid 1780mm x 1170mm

• Manufacturer: FM Industries

Brand: FM IndustriesWeight: 800kgOutside dimensions: 1900mm x 1900mm x 1130mmInner dimensions: 1780mm x width 1170mmEngine: Leroy Somer4 kW; 220/380 V; 1430 rpmRust mesh 30 x 25mmV-belt drive 3x for green sand,wi...

Laboratory sand rammer GF/SPRA

• Manufacturer: Rammer

With sample sleeve Dimensions: width 200 mm, depth 265 mm, height 680 mm

Molding machine ZIMMERMANN G1

• Manufacturer: Zimmermann

Serial number: 157118Dimensions: 750 mm x 1060 mm x 1710 mmPressing pressure: 4000 kg at 6 barJolt capacity: 200 kgBox size: 750 mm x 550 mmPress stroke: 100 mmLifting stroke: 200 mmUseful height: 500 mmWith SIEM...

Jolt-squeeze moulding machine ZIMMERMANN GO/2B

• Manufacturer: Zimmermann

This machine shakes under pressure Number: 129714 | Press pressure: 3000 kg | Payload: max. 120 kg | Weidth max. moulding boxes: 450 mm | Table size: 570 mm x 430 mm | Press stroke: 90 mm | Lifting stroke: max. 1...