Used Processing in Connecticut, USA

Watts 3/4" 2000-M5 2 Way Universal Flow Check Max PSI 50

• Manufacturer: Watts

Watts 3/4" 2000-M5 Control Valve 3 Way Max PSI 50Make: Watts Model: 2000-M5Serial No: 0950681Condition: Used, Overall Like NewProvides Positive Gravity ShutOffUsed In Forced Hot Water Heating SystemsProtects Radi...

Thermal Care NQA08 8 Ton 460V 3 Ph Accuchiller Air-Cooled Portable Chiller NEW!

• Manufacturer: Thermal Care
• Model: NQA08

Thermal Care NQA08 8 Ton 460V 3 Ph Accuchiller Air-Cooled Portable Chiller NEW! Refrigerant: R454B Low GWP A2L Refrigerant Nominal Cooling Capacity: 8 ton at 50°F LWT Voltage: 460/3/60Hz Tank/Pump Options: Tank &...

PolyScience 6860T56A270D 1.5 HP Air-Cooled Chiller with turbine pump, 230 V, 60 Hz

• Manufacturer: PolyScience

PolyScience 6860T56A270D 1.5 HP Air-Cooled Chiller with turbine pump, 230 V, 60 HzMake: PolyScienceModel: 6860T56A270DSerial No: 108100199Condition: Used, Overall In great Shape, Tested For Indoor Use OnlyDura Ch...

Sears Model 919.177551 125 Max Psi 30 Gallon 5Hp 220V 1Ph Horiz Air Compressor

• Manufacturer: Sears

Sears Model 919.177551 125 Max Psi 30 Gallon 5Hp 220V 1Ph Horiz Air Compressor 5 Hp 220 Volt 1Ph Tested Runs Great Currently Not Installed Or In Use Instock And Available Immediately Sears Model 919.177551 125 Ma...

AirNet 45° Elbow Dn 50-2" pn 2810 5004 00 Air Compressor Tube Angle Connection

• Manufacturer: AirNet

AirNet 45° Elbow Dn 50-2" pn 2810 5004 00 Air Compressor Tube Angle ConnectionMake: AirNet Model: pn 2810 5004 00Condition: NewSeries: DN 50-2"45° Angle For 2 Inch Piping Threaded Clamping EndsPlastic BodyAsset I...

10" W. x 9' L., Prab, Stock # CV 050 Steel Cleat Flap Conveyor on angle 10-1/2" Wide x 106.5 floor length

Prab Conveyor S/N 8575 Steel Flap Cleat Conveyor 10.5” wide Steel Cleat Flap type Belt 106.5” Long 38” along floor 51” along incline 28” at top Height 38” under conveyor belt 49” above belt 3 Phase .5 HP Motor 22...

6" W. x 6' L., Goessling, 6" x 74" high on incline 460 volts 3 phase

GOESSLING USA CONVEYOR Serial No. 2090148 6" Steel Cleats 17" along floor x 74" High 9" X 17" Hopper separated at 12" 460 Volts 3 Phase .29 KW Motor Like New

12" W. x 7' L., Titan, Titan 12" wide rubber belt with cleats

Model 304 Parts Conveyor Model Description: The rugged Model 304 Titan Parts Conveyor is designed to handle many various types of products. The odel 304 allows you to convey and elevate product from one machine t...

15" W. x 8' L., Flat Belt Conveyor 15-1/2" wide x 8' long 115 volts

• Manufacturer: Correa

Flat Belt Conveyor 15.5" Flat Belt 98" Long 1 Phase .5 HP Motor 115 Volts Good Condition Shown under power

12" W. x 10' L., , 12" x 10 foot vertical with rubber cleats good condition

CONVEYOR 12”Rubber Cleat 3” tall cleats 10 foot vertical at 30 degrees Gear Head Motor 3 Phase Very good condition Color - Green Shown under power

2022 Glass Tempering Furnace 1600x2800mm

• Manufacturer: Smart Glass Equipment

Glass tempering furnace with forced convection Condition: New Max glass size: 1600x2600mm, 2400x3600mm, 2400x4800 and 2800x5000 Glass thickness: 3-15 mm Working power: from 250 kW Glass types: Clear and tint...

2025 SGE Lami EVO 3222 Glass Lamination Oven

• Manufacturer: SGE

Brand new glass lamination oven or full line for max glass size 2200x3200mm, 2200, 4500 mm, 2200x6000mm - EVA and SPG laminated glass - Switchable glass - Decorative panels Power consumption - 45 kW ... 90 kW ...

2017 Multi-Bar Shot Blasting Line DSCR-202163

• Manufacturer: SAS, Italy

Multi-Bar Shot Blasting Line DSCR-202163 30 - 60 mm (.31.18" - 2.36") - up to 7 bars at a time Over 60 mm (2.36") - up to 4 bars at a time 4 Blasting Wheels, 22 kW per Wheel Like new condition

GRIEVE WRH446-500

• Manufacturer: Grieve

DOUBLE DOOR OPENING WITH PRESSURE TYPE LATCHES, STAINELSS STEEL. INTERIOR WITH INSULATED FLOOR AND CART TRACKS. HEATED AIR IS CIRCULATED HORIZONTALLY. OVEN HAS A SOLVENT RATING OF 5.38 GALLONS PER BATCH OF ALCOH...

GRIEVE B3-450

• Manufacturer: Grieve

DOUBLE DOOR OPENING WITH PRESSURE TYPE LATCHES AND STEEL PLATE FLOOR. HEATING ELEMENTS, CIRCULATING FAN AND POWER EXHAUST ARE MOUNTED IN A PROTECTED AREA BEHIND WORK CHAMBER.. HEATED AIR ENTERS WORK AREA VIA DUCT...