Used Processing in Portugal

Pre-filter QM 10

QM Pre-Filter - Micron Grade 5 Should always be installed before the dryer. A long service life combined with excellent heat resistance to heat and abrasion makes it ideal means of initial protection of a compres...

Pre-filter QM 18

QM Pre-Filter - Micron Grade 5 Should always be installed before the dryer. A long service life combined with excellent heat resistance to heat and abrasion makes it ideal means of initial protection of a compres...

Screen conveyor

1 Screen conveyor 1400 mm width (screen) 1500 mm length 940 mm high With adjustable feet Motorized With geared motor 0,18 Kw, 230/400V, 50 Hz Speed 4 mt/min. Without electrical panel - a circuit breaker with safe...

Lemorau CTA 1500

• Manufacturer: LEmorau

Lemorau CTA 1500 is an automatic core cutter machine. Its function is cutting cores in a desired measure over its total length and in a selected quantity. Built with heavy-duty components to exact specifications,...

Lemorau EBRM+

• Manufacturer: LEmorau

Lemorau EBRM + is an affordable table top digital finishing machine that can coat, die cut, slit and rewind digital printed webs. Due to an electronic feeder roll, the machine can be used as in-line finishing mac...

Vacuum cleaner hospi plus 2x4l

HOSPI SURGICAL ASPIRATOR General Information Product description Innovative range of high vacuum, high flow aspirator ideal for hospitalsPiston type pump lubrication, and maintenance freeEquipped with 99% hydroph...

Clinic plus 2x4l vacuum cleaner

CLINIC PLUS ASPIRATORgeneral information Product description Innovative range of high vacuum, high flow aspirator ideal for hospitalsPiston type pump lubrication, and maintenance freeEquipped with 99% hydrophobic...

Conveyor belt CRIZAF

• Manufacturer: Crizaf

Surface of 3500 mm length x 500 mm width with auto alignment system Wavy side walls in flexible polyurethane with 30 mm height Locks for positive movement of the pieces, with 20 mm height and spaced every 495 mmS...

NICEM C700 MASTER

• Manufacturer: Nicem

Allows to centrifuge molds up to 700mm in diameter. Few hours of work. Fully revised machine.

Ultrasonic cleaning machine for particle filters / collectors

Ideal machine for cleaning particulate filters and collectors.

Air Dryer PS 43 - 4300l/min

Fine Oil Separator Filter - HM 72

• Manufacturer: Cetrus

HM Filter - Filtration grade 0.01 micron + residual oil 0.01 mg/m 3 To be installed after QM and PM filters. It is a filter very similar to the PM series, differing only in the filtration grade. This filter allow...

Fine Oil Separator Filter - HM 34

• Manufacturer: Cetrus

HM Filter - Filtration grade 0.01 micron + residual oil 0.01 mg/m 3 To be installed after QM and PM filters. It is a filter very similar to the PM series, differing only in the filtration grade. This filter allow...

Fine Oil Separator Filter - HM 18

• Manufacturer: Cetrus

HM Filter - Filtration grade 0.01 micron + residual oil 0.01 mg/m 3 To be installed after QM and PM filters. It is a filter very similar to the PM series, differing only in the filtration grade. This filter allow...

Oil Separator Filter - PM 30

• Manufacturer: Cetrus

PM Filter - filtration grade 1 micron + residual oil 0.5 mg/m 3 To install after the drier or QM filters. This filter, following the principles of shear and coalescence, forces the particles of the oily fluid to ...