Used Processing in Flanders, Belgium

POLYBOIS RAV 32 Feeder

• Manufacturer: polybois

Machine number: Tension: 400V 50Hz 3Ph

1992 HACKEMACK KTR 2040 Drying equipment for stain and lacquer

• Manufacturer: Hackemack

UV dryer 1 lamp Cross bar transport Working width: 1.3 m. Number of units: 1 Total power: 12.2 kW UV dryer 5 lamps Cross bar transport Working width: 1.3 m. Number of units: 5 Total power: 62.4 kW shared electric...

1991 JOSTING EFS 2800 L Veneer pack guillotine

• Manufacturer: josting

Cutting length: 2800 mm Max pack height: 80 mm. Hydraulic pressure beam 2-hand operation Light beam security Motorised back fence

Hindenlang TPESM-600 - Induction oven

• Manufacturer: Hindenlang

Hindenlang TPESM-600 - Induction oven Kind of: volume capacity melt bath | Max temperature: 850° | Capacity: 550 kg | Power needed: 69 kW | Voltage: 400 V

H&C Fours 400°C 1000 x 1100 x 1000 mm

• Manufacturer: H&C Fours

H&C Fours 400°C 1000 x 1100 x 1000 mm Max temperature: 700 °C | Power needed: 42 kW - 95 A | Voltage: 400V 3 phase

H&C Fours 400°C 1000 x 1100 x 1000 mm

• Manufacturer: H&C Fours

H&C Fours 400°C 1000 x 1100 x 1000 mm Max temperature: 700°C | Power needed: 42 kW - 95A | Voltage: 400V 3 phase

Hindenlang TPESM-600 - Induction oven

• Manufacturer: Hindenlang

Hindenlang TPESM-600 - Induction oven Max temperature: 850° | Capacity: 600 kg | Voltage: 400 V

Hindenlang TPESM-600 - Induction oven

• Manufacturer: Hindenlang

Hindenlang TPESM-600 - Induction oven Kind of: volume melt bath | Max temperature: 850° | Capacity: 550 kg | Power needed: 69 kW | Voltage: 400 V / 100 A

Indramat power line filter NF001 1-440-050

• Manufacturer: Indramat

Indramat power line filter NF001 1-440-050

Manni / Cannon polyurethane press for sandwich panels

• Manufacturer: Cannon

Panelen voor thermische isolatie van industriële gebouwen Sectionaaldeurpanelen (huidige configuratie) Panelen voor residentiële dakisolatie Manni trolleypers 2+2 De hydraulische gesloten matrijspers (2+2) is d...

Stam Siempelkamp sandwich panel line CNC

• Manufacturer: Siempelkamp

Decoiling and rollforming line for manufacturing roof sandwich panels Max width of finished panel: 1000 mm PRODUCTION SPEED 7,30 meter per minute UP Floor 1 - Stam decoiler of 12 ton 2 - Memco embosser 3 - In-l...

1995 FISCHER+RÜCKLE FLA Glue spreader

• Manufacturer: Fischer

Automatic veneer pack edge glueing machine Veneer pack length: from 300 mm on Veneer pack width: 40 to 400 mm Veneer pack thickness: 10 to 80 mm Feed speed: 30 m/min Capacity, depending on pack length, ca. 3 to 4...

1987 JOSTING ZFS 2800 Veneer pack guillotine

• Manufacturer: josting

Cutting length: 2810 mm. Veneer pack thickness: 80 mm. Cutting width: 20 to 470 mm., 1 top knife, 1 bottom knife, simultaneous cutting Hydraulische pressure beam Power installed: 9 kW Preselection of 16 different...

ADAMIK CO. AP 300/130 Vacuum Press

Dimensions of the press: 3000 x 1300 mm. Useful dimensions: 2850 x 1150 mm. Standard vacuum pump: 12 m3/h, on request 25 m3/h or 40 m3/h Temperature: 50 - 60°C 3 mm thick membrane, 700% elasticity Medium heating ...