- Trusted Seller
WATERBURY #10 HEAVY
used
- Manufacturer: Waterbury Farrel
- Model: 10 HEAVY
Maximum thread diameter: 1/4" | Maximum thread length: 2" | Maximum production: 150 PPM | Approx. weight: 3,700 lbs | Approx. floor size: 45" W x 72" L | Equipped with: Vibratory BowlCheck out our full inventory
Ivyland, PA - Trusted Seller
WATERBURY #20
used
- Manufacturer: Waterbury Farrel
- Model: 20
Maximum thread diameter: 3/8" | Maximum thread length: 3" | Maximum depth of die face: 3-1/8" | Maximum production: 125 PPM | Approx. floor size: 52" W x 102" L | Approx. weight: 7,600 lbs
Ivyland, PA - Trusted Seller
1994 SASPI RV-8
used
- Manufacturer: SASPI
- Model: RV-8
Thread diameter range: 3mm - 8mm | Thread length capacity: 5mm - 80mm | Production rates: 150 - 1000 PPM | Ring die diameter: 6" | Segment length: 7-1/4" | Approx. weight: 4,400 lbs | Equipped with: With Livonia...
Ivyland, PA - Trusted Seller
KINEFAC MC-5-F
used
- Manufacturer: KINEFAC
Maximum infeed diameter: 2" | Maximum thread die length: 2-1/4" | Spindle diameter: 2"
Ivyland, PA - Trusted Seller
HARTFORD 10-300
used
- Manufacturer: Hartford
- Model: 10-300
Diameter: #6 thru 5/16" | Maximum production: Variable to 300 PPM | Thread length capacity: 1/8" thru 3" | Blank length maximum: Up to 4" | Electrics: 220V | Equipped with: Check out our full inventory
Ivyland, PA - Trusted Seller
HARTFORD 4-600
used
- Manufacturer: Hartford
- Model: 4-600
Diameter: through 1/4" | Maximum shank length: 3" | Thread length (maximum): 2" | Production: 200 - 600 PPM | Electrics: 7 1/2 HP AC Motor & Controls | Approx. weight: 5700# | Approx. floor size: 5'2" x 6'8" | E...
Ivyland, PA - Trusted Seller
HARTFORD 4-600
used
- Manufacturer: Hartford
- Model: 4-600
Diameter: through 1/4" | Maximum shank length: 3" | Thread length (maximum): 2" | Production: 200 - 600 PPM | Electrics: 7 1/2 HP AC Motor & Controls | Approx. weight: 5700# | Approx. floor size: 5'2" x 6'8" | E...
Ivyland, PA - Trusted Seller
WATERBURY FARREL #20
used
- Manufacturer: Waterbury Farrel
- Model: 20
Maximum thread diameter: 3/8" | Maximum thread length: 5" | Maximum speed: 60 SPM | Approx. weight: 5,000 lbs | Equipped with: With Adjustable PitmanSpecial 5" Deep Die PocketSet For Wire Feed - Can Be Removed
Ivyland, PA - Trusted Seller
TSUGAMI R15A
used
- Manufacturer: Tsugami
- Model: R15A
Maximum rolling force: 15 TON (M) | Maximum rolling capacity infeed: 75mm | Maximum thread length (infeed): 150mm | Spindle diameter: 54mm | Spindle speeds: (4 Step) 20, 36,58, 82 RPM | Max thread pitch: 5mm | S...
Ivyland, PA - Trusted Seller
HARTFORD 20-225
used
- Manufacturer: Hartford
- Model: 20-225
Screw diameter capacity: 1/4" thru 1/2" | Maximum thread length: to 3" | Thread length at max. diameter: 1-1/2" | Maximum shank length: 4" | Production rate: 135 - 225 PPM | Die pocket depth: 3-1/8" | Flat die s...
Ivyland, PA - Trusted Seller
1996 ROLLMAX 5NF
used
- Manufacturer: ROLLMAX
Production: 1500 PPM | Screw diameter capacity: .050" - .375" | Thread length capacity: 3" | Approx. floor size: 54" W x 66" L x 64" H | Equipped with: 42" Vibratory Bowl
Ivyland, PA - Trusted Seller
1990 WARREN INDUSTRIES WT-1500
used
- Manufacturer: Warren
- Model: WT-1500
Die requirement: "0" or "1015" | Screw diameter capacity: #2 thru #12 (1/4") | Speed range: 90 to 700 PPM | Maximum blank length: Up to 3" | Die pocket depth: 3" | Approx. weight: 4,500 lbs | Approx. floor size:...
Ivyland, PA - Trusted Seller
1980 KINEFAC MC-5-F
used
- Manufacturer: KINEFAC
Maximum infeed diameter: 2" | Spindle diameter: 2" | Maximum diameter thru feed: 1-1/2" | Die length: 4" | Electrics: AC Motor and Controls | Approx. weight: 3,000 lbs | Equipped with: Hydraulic Pump and TankCoo...
Ivyland, PA - Trusted Seller
1986 TESKER 30
used
- Manufacturer: TESKER
Capacity: 5/8" Maximum Diameter | Rolling pressure adjustable to: Fixed | Motors spindle drive: 15 HP | Hydraulic coolant: 1/4 HP | Maximum diameter (dies): 4-7/8" | Maximum die face width: 3" | Standard spindle...
Ivyland, PA - Trusted Seller
1990 TESKER 30
used
- Manufacturer: TESKER
Capacity: 5/8" Maximum Diameter | Rolling pressure adjustable to: Fixed | Motors spindle drive: 15 HP | Hydraulic coolant: 1/4 HP | Maximum diameter (dies): 4-7/8" | Maximum die face width: 3" | Standard spindle...
Ivyland, PA 
Landis 4291 Threading & Tapping
used
- Manufacturer: Landis
- Model: 4291
Good condition Landis 4291 Threading & Tappings. Located in USA and other countries. Click request price for more information.
USA
Tip: Enter manufacturer, model or keyword
