Used Material Handling

2008 StraPack RQ-8

• Manufacturer: StraPack
• Model: RQ-8

This listing is for a StraPack Automatic Strapping Machine Item is in good used cosmetic condition. Item has the following issues: No Controller Item is sold as is for parts or repair Additional Information: Mode...

Performance Health 597107 Ankle Brace X-Large White Clamshell

• Manufacturer: Hygenic/Performance Health

The Performance Health 597107 Ankle Brace is designed to provide superior support and stability for individuals suffering from ankle injuries or instability, making it an ideal solution for both clinical and home...

1989 Novatec NPH-HOPPER Used

• Manufacturer: Novatec
• Model: NPH-

600 lb Capacity Buyers are welcome to inspect equipment prior to purchase. Expedited shipping services are available upon request. This piece is located at Ideal Machinery, Inc. on our showroom floor. Located...

Stainless Steel 55 Gallon Drums

55 gallon drums - stainless steel 304. Approx 11 drums with reinforcing bands, and 10 drums without reinforcing band. Drums have lids. Specify which kind - priced by the drum (minimum order 3 drums). Quantity (2...

CONAIR FRANKLIN DB12SE03MB DustBeater Vacuum Loader USED

• Manufacturer: Conair

4" Cylinder Height 7.25" Cone Height 12" Inside Cylinder 13.75" Filter Diameter 14.5" Inside Lid Cylinder 4.75" Bottom Inlet / Outlet Approx. 40.79 mm Tested Good Buyers are welcome to inspect equipment p...

UNA-DYN LS-45 Auto Loader USED

• Manufacturer: Una-Dyn

Self Contained with Lid and Filter Outside Diameter: 10" Inside Diameter: 9" Outlet 1 Inside Diameter: 1.25" Bottom Outlet Inside Diameter: 3" Flange: 7" x 5.5" Holes Center-to-Center: 6.5" x 5" 110 Volt ...

UNA-DYN 82894.06 Loader Used

• Manufacturer: Una-Dyn

82894.06 LID AND FILTER INCLUDED OD: 10" ID: 8 3/4" Outlet 1: 1 1/2" Bottom outlet: 2 1/2" Flange: 7" x 5 1/2" Bolt Holes, Center-to-Center: 6 1/4" x 4 3/4" Buyers are welcome to inspect equipment prior t...

AMI Spring Loaded Industrial Pallet Load Leveler 3500lbs 42x46" Swivel Top

• Manufacturer: AMI

Used, in Good Working Condition. Removed From a Working Environment. Not sure what weight the springs are set at. Swivel top 42x46". 30" high with no load. If this item ships as Flat Rate Freight please see detai...

METAL FABRICATOR STAINLESS STEEL HOPPER USED

• Manufacturer: METAL FABRICATOR

2 1/4" Inlet / Outlet 27 1/2" Height 28" Diameter Buyers are welcome to inspect equipment prior to purchase. Expedited shipping services are available upon request. This piece is located at Ideal Machinery, ...

BUNTING 33373 Drawer Magnet USED

• Manufacturer: Bunting

1 7/8" Diameter Inlet / Outlet Hole Top of Flange 6.25" x 6.25" Top Flange 1.25" Cone 1.25" Cylinder 3.75" x 6" Bottom Flange 1 7/8" Diameter Bottom Inlet / Outlet 2.25" from Top of Cone to Cylinder 5" x 5...

METAL FABRICATOR Drawer Magnet USED

• Manufacturer: METAL FABRICATOR

3.25" x 5" Center to Center Holes Bottom Flange Approx. 9" x 9" Top Flange 9" x 9" Bottom Flange 1.25" Cylinder Height 1.5" Cone Height 76.67 mm Diameter Inlet / Outlet Bottom Flange Approx. 89.93 mm Diamet...

BUNTING MAGNETICS Drawer Magnet 53169 USED

• Manufacturer: Bunting

4.25" Diameter Inlet / Outlet Top Flange Approx. 7.5" x 7.5" Top Flange 1.5" Cone Height 1.25" Cylinder Height 7.5" x 7.5" Bottom Flange 6" x 6" Center to Center Bottom Flange 3.75" Diameter Inlet / Outlet ...

METAL FABRICATOR Drawer Magnet USED

• Manufacturer: METAL FABRICATOR

50.67 mm X 50.67 mm Inlet / Outlet Square Top Flange 4.5" x 4.5" Top Flange 3" Bottom Cone 4.5" x 4.5" Bottom Flange 50.67 mm x 50.67 mm Inlet / Outlet Square Bottom Flange Expedited shipping services are av...

METAL FABRICATOR Drawer Magnet USED

• Manufacturer: METAL FABRICATOR

75.61 mm Diameter Inlet / Outlet Top Flange Approx. 7" x 7" Top Flange 6" x 6" Center to Center Holes Top Flange Approx. 7" x 7" Bottom Flange 6" x 6" Center to Center Holes Bottom Flange Approx. 75.75 mm Di...

IMI 5C1530-PG0077 Drawer Magnet USED

• Manufacturer: IMI

94.63 mm Diameter Inlet / Outlet Top Flange Approx. 7" x 7" Top Flange 4.75" x 4.75" Center to Center Holes Top Flange Approx. 4.25" x 8.5" Bottom Flange 3.25" x 4.25" Center to Center Holes Bottom Flange App...