1975 Haeusler HPR 10-hy-asym-spec
- Manufacturer: Haeusler
Top support for diameter: 650-1500mm Angle iron dia.1000mm: 100x100x11 mm | Square iron dia. 500mm: 50x50 mm | Round iron dia. 600mm: 65 mm | Flat iron high edge dia900mm: 90x15 mm
Värnamo, Sweden- Trusted Seller
Haeusler Plate Roll Cap. 3000 x 35 mm
- Manufacturer: Haeusler
- Model: VRM-HY
Haeusler Plate Roll Cap. 3000 x 35 mm Max. Plate Thickness by Capacity at a Yield Point Adjustment of the Rolls Top Side: 0-700 mm/Min
Europe - Trusted Seller
CURVAPROPHILATES (SWISS) HAEUSLER product code: 28827
- Manufacturer: Haeusler
Hurry! This product has already been viewed 1,560 times! Don't miss out! HAEUSLER PROFILE BENDING MACHINE (SWITZERLAND) WITH 3 130 DRIVE SHAFTS, COMPLETED WITH A 1.2 TONS OF EQUIPMENT DIMENSIONS 1400X1400XH1700 W...
Mogliano Veneto, Italy - Trusted Seller
HAEUSLER CALENDAR - VRM-HY product code: 31408
- Manufacturer: Haeusler
- Model: VRM-HY
Hurry! This product has already been viewed 1,067 times! Don't miss out! HAEUSLER CALENDER - VRM-HY Rolling width: 3050 mm Rolling thickness: 3 top rolls, Ø 60 mm Rolling thickness: 5 top rolls, Ø 70 mm Rolling t...
Mogliano Veneto, Italy - Trusted Seller
HAEUSLER CALENDAR - VRM-HY product code: 31409
- Manufacturer: Haeusler
- Model: VRM-HY
Hurry! This product has already been viewed 1,104 times! Don't miss out! HAEUSLER CALENDER - VRM-HY Rolling width: 3000 mm Rolling thickness: 3 top rolls Ø 130 mm Rolling thickness: 5 top rolls Ø 140 mm Rolling t...
Mogliano Veneto, Italy - Trusted Seller
HAEUSLER 4-roller calender - VRM-HY product code: 34046
- Manufacturer: Haeusler
- Model: VRM-HY
Hurry! This product has already been viewed 334 times! Don't miss out! CALNADRA 4 rollers HAEUSLER - VRM-HY Specifications Laminating width 3050 mm Laminating thickness 3x upper roller Ø 90 mm Laminating thicknes...
Mogliano Veneto, Italy - Trusted Seller
HAEUSLER 4-roller calender - VRM-HY product code: 34045
- Manufacturer: Haeusler
- Model: VRM-HY
Hurry! This product has already been viewed 350 times! Don't miss out! HAEUSLER 4-Roller BENDING MACHINE - VRM-HY HAEUSLER - VRM-HY Technical Specifications Lamination width 3000 mm Lamination thickness 3x upper ...
Mogliano Veneto, Italy - Trusted Seller
Calender 4 rollers 2000 x 50 mm HAEUSLER YEAR 1991 product code: 28095
- Manufacturer: Haeusler
Hurry! This product has already been viewed 1,992 times! Don't miss out! HAEUSLER 4-roll calender, 2000 x 50 mm, YEAR 1991 Technical data:
Mogliano Veneto, Italy 
2024 HAEUSLER EVO 42196
- Manufacturer: Haeusler
- Power requirement: 55 kW
Equipped with: - Haeusler BENDtronic 2.0 control system - Smallest possible bending diameter with upper roller Ø540mm: 595mm (depending on springback) - Roller bearings: Self-adjusting roller bearings - Max. cyl...
Monheim am Rhein, Germany2011 HAEUSLER VRM-HY 4000 x 30/35
- Manufacturer: Haeusler
- Model: VRM-HY
- Power requirement: 60 kW
The machine was overhauled in 2022 Equipment: - Hydraulic 4-roller round bending machine - Roll material: 61 MnCrMo 43 - Driven rolls: 2 Top-and bottom roll -- Drive: over 2 hydro motors direct flanged -- Adjust...
Monheim am Rhein, Germany10' X 1/2" HAEUSLER INITIAL DOUBLE PINCH PLATE BENDING ROLL: STOCK #79541
- Manufacturer: Haeusler
- Model: VRM-HY
Stock#: 79541 | Capacity: 120" x 1/2" | Length of rolls: 120" | Diameter of top and bottom rolls: 14" | Diameter of side rolls: 11" | Motor: 40HP, 440 Volt, 60 | Cone rolling ability: Yes | Hydraulic drop end: Y...
Holland, OH2001 HAEUSLER VRM HY 4000 x 45
- Manufacturer: Haeusler
- Model: VRM-HY
VRM HY 4000 x 45 | year of construction 2001 Bending length 4000 mm Bending strength 45 mm Drive power 100 kW Number of rollers 4 Adjustable rollers 3 Type of rollers adjustment hydraulic Top roller diameter 710 ...
Fürstenwalde, Germany
1971 Haeusler VRM-HY 4 rolls 3100 x 42/30 mm
- Manufacturer: Haeusler
- Model: VRM-HY
Useful length: 3100 mm Max. bending thickness 42 mm Max. pre-bending thickness 30 mm Top roll diameter: 570 mm Bottom roll diameter: 570 mm Side rolls diameter: 460 mm Rotation speed: 4m/min. The machi...
Visano, ItalyMake Haeusler, type VRM-hy 3000 x 120 mm
- Manufacturer: Haeusler
- Model: VRM-HY
No. 2150 Year of construction 1990, Factory inspection 2018 Special features: Optical displays of the roller adjustments Central lubrication Cone bending device Tracking brake Replacement top roller Ø 820 mm Ø 74...
Duggingen, SwitzerlandHAEUSLER make, type VRM-hy 3000x12 mm
- Manufacturer: Haeusler
- Model: VRM-HY
No. 2152 Year of construction 1984 Special features: Digital displays for roller adjustment Central lubrication Air cooling Cone bending device CNC control Inquiries
Duggingen, Switzerland
Tip: Enter manufacturer, model or keyword
