Used Centrifugal Pumps in West Virginia, USA

3HP Iwaki Magnetic Drive Pump - MDF-L Series

• Manufacturer: Iwaki

Cast iron housing, stainless steel wetted parts Suction: 50mm flange Discharge: 40mm flange Capacity: 100 liters per minute Head: 15 meters max. 3HP direct drive (3450RPM max.) Power service: 200/220V, 50/60Hz, 3ph

3/4 HP Berkeley Pump - Model BVM2-30

• Manufacturer: Berkeley

Overall dimensions: 47"x17x24, 148 lbs. Gpm: 0 | Hp: .75

3HP Iwaki Magnetic Drive Pump - MDF-L Series

• Manufacturer: Iwaki

Cast iron housing, stainless steel wetted parts Suction: 50mm flange Discharge: 40mm flange Capacity: 100 liters per minute Head: 15 meters max. 3HP direct drive (3450RPM max.) Power service: 200/220V, 50/60Hz, 3ph

3HP Iwaki Magnetic Drive Pump - MDF-L Series

• Manufacturer: Iwaki

Cast iron housing, stainless steel wetted parts Suction: 50mm flange Discharge: 40mm flange Capacity: 100 liters per minute Head: 15 meters max. 3HP direct drive (3450RPM max.) Power service: 200/220V, 50/60Hz, 3ph

7.5 HP DURCO PUMP 3 X 2 X 10/8.19

• Manufacturer: Durco

SHIPS WITH UN-BOLTED CAST IRON CASING. Gpm: 0 | Hp: 7.5

MAGNATEX MAGNETIC DRIVE Pneumatic PUMP MODEL MP221-N25N-140TC SIZE 1X3/4X5

• Manufacturer: Magnatex

S/N M-504508. 316 STAINLESS STEEL. RATED FOR 10 GPM @ 60' TDH. 5.6" IMPELLER Ø. 1.5 HP MOTOR.

LSC PRE-ENGINEERED 16 GPM LUBRICATION LUBE OIL SYSTEM COOLER

BUILT IN 2006. S/N 064901-01 (TYPICAL). 54 GALLON STAINLESS STEEL RESEVOIR. STAINLESS STEEL PIPING AND FITTINGS. (2) 1.5 HP TUTHILL 3C2FV-CC PUMPS. PTI TECHNOLOGIES FILTER F7F100HH-B40QNX. 2 HP FAN COOLING A...

60HP Goulds 3196 Centrifugal Pump - 3X4-10 [PARTS]

• Manufacturer: Goulds
• Model: 3196

Rigid baseplate mounting. Centrifugal end-suction, direct drive configuration. I-frame power ends. Impeller RPM: 3600. Requires 460 volts, 60Hz, 3 phase AC power.

60HP Goulds 3196 Centrifugal Pump - 3X4-10 [PARTS]

• Manufacturer: Goulds

ITEM #: 16142 Used 60HP Goulds 3196 Centrifugal Pump - 3X4-10 [PARTS] Rigid baseplate mounting. Centrifugal end-suction, direct drive configuration. I-frame power ends. Impeller RPM: 3600. Requires 460 volts,...