• Manufacturer: Hardinge

      equipped with: osp p200 cnc control 4 usb ports 60 gb. memory mp systems rf8 high pressure system 4th axis prep chip wash down system transformer thru spindle coolant (300 psi) chip conveyor all available manuals

      No price
      Belvidere, IL, USA
    • 2001 HARDINGE VMC800II VMC TK-19514

      • Manufacturer: Hardinge

        width: 20.00” length: 36.40” load capacity: 1,540 lbs t-slots (# & size): .708” x 3 x 6.3” taper: 40 speed range: 10,000 rpm transmission: belted motor (cont/peak): 10 /15 hp max torque at base speed: 39 ft-lb ai...

        $29,500 (USD)
        Bethlehem, PA, USA
      • 2014 HARDINGE GS51MS; 2014; Live Tooling and Sub Spindle

        • Manufacturer: Hardinge

          equipped with: fanuc 0i-td cnc control bmt 45 live tooling parts catcher chip conveyor

          No price
          South Elgin, IL, USA
        • HARDINGE VMC 800II 4TH AXIS CNC VMC #1422

          • Manufacturer: Hardinge

            product description hardinge vmc 800ii vertical machining center all specifications are approximations, and are subject to verification. this one owner machine has low cutting hours, 4th axis rotary table, 8000rp...

            No price
            Chino, CA, USA
          • 2007 Hardinge XV1000

            • Manufacturer: Hardinge
            • Control: FANUC OiM

            coolant, interlocked guards, low volt light control: fanuc oim | feedrate: 6m/minute | tool size: bt40 | table size: 1100 x 500mm | spindle speed: 8000rpm | traverses xyz: 1020 x 610 x 559mm | machine weight: 5...

            No price
            Leicester, United Kingdom
          • Vertical head VH 2 Hardinge Universal Milling Machine

            • Manufacturer: Hardinge

              vertical head model vh 2, s# 25629, 1 1/16" collet capacity, 8 spindle speeds from 110 to 1,850 rpm, 6.5" x 25" table (swivels 0° to 40°), left/right power feed on table, adjustable work light, built in chip...

              $2,450 (USD)
              Minneapolis, MN, USA
            • 2010 HARDINGE GX 480DT APC # 5023

              • Manufacturer: Hardinge

                the machine is in good technical condition, after agreement the possibility to test it under power.

                No price
              • 2006 HARDINGE BRIGEPORT 760XP3

                • Manufacturer: Hardinge

                  hardinge bridgeport's specification as follows: travel: x axis: 760mm (30in.) y axis: 610mm (24in.) z axis: 610mm (24in.) feedrate: rapid traverse rate: 43/43/36m/min (1690/1690/1410in./min) worktable: table load...

                  $11,150 (USD)
                  Aberdeen, United Kingdom

                Have 5 seconds to help us improve the results?

                I'll do it
                No thanks