Used Processing in Canada

Cyclone dust collector vessel

-Cyclone dust collector vessel on stand -Legs 83” tall -Bottom shoot: 6” diameter -Top 2 shoots: 7” diameter -H 122” x W 49” x L 49” -Diameter of Cylinder: 24 1/2" -Height of cylinder: 40" -Height of cone: 38 1/2"

Cone Bottom Carbon Steel Hopper Tank

-Diameter: 9ft -Top opening: 36" x 36" -Two bottom openings: 20" x 20" -Length of legs: 73" or 6.1 ft -Attached to the hopper bottom is a Vibco 250 -Monitor: -Model: KA -Power: 115 V~50/60 Hz -UL listed -Total di...

Blower

-Shipping dimensions: Width 13 1/2" x Height 16 1/2" x Length 17" -HP .25 -V 200 -3 Phase -Hz - 50 / 60 -19 kg

Ametek Rotron Regenerative Blower

• Manufacturer: AMETEK Powervar

-CATEGORY: Blowers/ fans -Model DR979-BE-72-W -Part # 080704 -15 hp, 230/460 volt -3500 rpm -4" ports -1100 scfm -UNUSED -Stock Number: C9304 -Manufacturer: AMETEK -Model: DR979 BE 72 W

Cone Bottom Carbon Steel Hopper Tank

-Diameter: 9ft -Top opening: 36" x 36" -Two bottom openings: 20" x 20" -Length of legs: 73" or 6.1 ft -Attached to the hopper bottom is a Vibco 250 -Monitor: -Model: KA -Power: 115 V~50/60 Hz -UL listed -Total di...

Read co. Continuous Mixer

• Manufacturer: Read

-master motor:1/3 HP -1 Phase -.4 AMPS -1725 RPM -115 v -z blades

Hibon blower

• Manufacturer: Hibon

-Model 2051-HCZ -Serial 5V015-63 -230/460 volt @ 1750 rpm -3 IN STOCK

590 Litres Closed top plastic tank

-Closed top with manhole opening -Flat bottom -Measurements on side in us gallons -2"nipple on the side at the bottom -1" nipple on the side at the top 53.5" tall -30" diameter -130 imp gall

Stainless Auger

-Shipping dimensions: 213" L x 20 " W x 27" H -10" D x 17' 4" L -8 1/2" Flite Spacing -10 1/2" has hinger cover -10" x 10" discharge c/w valve -Stainless auger -Steel legs

Tablet Polisher Deduster

• Manufacturer: LSC-C

-Shipping dimensions: 30" length x 12" width x 31.5" height -Has speed control -Made in Beilun

Strong Hold SS Storage Cabinet

CATEGORY: Miss -60" wide x 30" deep -peak top -82" high at front, 92" high at back -2 sections (24" on left, 36" on right) -(1) sliding SS drawer -(1) lower shelf -(2) 110 volt outlets on back -(4) adjustable hei...

Shaker table Riser

-Shipping dimensions: Height 10" X Width 58 1/2" X Length 69 1/2" -Side shoot diameter: 8" -3 in stock -50" diameter

Fuji Ring Compressor

• Manufacturer: Fuji Electric

-Shipping dimensions: length 12" x width 12" x height "12 -Input/Output: 1.5" -3 phase -2 Poles -50/60 Hz -575 Volts -Output Hp: 1.1 -Max Amps 1.3 -Max H2O: 54.5 -Max CFM 98

Day Ribbon Blender

-Sew-eurodrive motor: 330/575 V, 7.50 HP, 1720 RPM, -5/16 jacket thickness -3/8 shell thickness -Walls have an extension that can be taken off -Shipping dimensions: 48” width x 120” length x 66” height with base ...

Clamp on Mixer with Weg Motor

• Manufacturer: WEG

-0.750" shaft diameter needed -Phase 3 -HP: 0.33 -Volts: 575 -RPM: 1730 -Amps: 0.44

Ingersoll Rand R185I Industrial Compressor

• Manufacturer: Ingersoll Rand
• Model: R185I

Good condition Ingersoll Rand R185I Industrial Compressors manufactured in 2023. Located in USA and other countries. Click request price for more information.