Used Extruders

GEA/Niro/Aeromatic E140 Radical Basket Extruder

• Manufacturer: Niro

GEA/Niro/Aeromatic E140 Radical Basket Extruder - Stainless steel contact parts - NICA system control panel - Nominally rated 0.5-2 kg/minute capacity - 0.37 kw, 20-160 rpm feeder motor - 0.75 kw 20-140 rpm impel...

Extruder Screws

*quantity Of 2 Name: Extruder Screws | Arrival date: 10-21-2025 | Dimensions l x w x h (inches): 156 x 10 x 5 | Weight (lb.): 1110 | Available quantity: 1

Bonnot Single Screw Extruder

• Manufacturer: Bonnot

Bonnot Single Screw Extruder Used Bonnot single screw extruder, model 2", stainless steel barrel and screw, with approximately 2" diameter X 10" long jacketed barrel with Pin and Grooving barrel, 6" x 4.5" feed t...

Jinhu 92MM Twin Screw Extruder

• Manufacturer: Jinhu

The Jinhu 92MM Twin Screw Extruder is a reliable used piece of industrial equipment designed for compounding applications, specifically for processing polyethylene (PE). It features a powerful 150 HP motor and op...

Gloucester Extruder

• Manufacturer: Gloucester

The Gloucester Extruder is a used 4.5-inch model equipped with an Extech Slide Plate Exchanger, ideal for recycling applications. This machine features a 30:1 L/D ratio and a 200 HP DC motor for robust and effici...

Hpm 3 1/4" X 154" Extruder

• Manufacturer: HPM

75 Hp, 1750 Rpm Name: Hpm Extruder | Arrival date: 06-26-2025 | Dimensions l x w x h (inches): 159 x 95 x 70 | Capacity: 3 1/4" X 154" | Electrical: 150/300/500V | Weight (lb.): 8430 | Available quantity: 1

WLS GABLER Mirrored Extruder System

• Manufacturer: WLS - Gabler

WLS GABLER Mirrored Extruder System Used WLS Gabler Spheronizing Pelletizing line, dual extruders into single spheronizer, stainless steel product contact surfaces, with (2) TA800/2 �agitated twin discharge screw...

LCI Extruder, model MG-55

• Manufacturer: LCI Fuji Paudal

LCI Extruder, model MG-55 Used LCI Extruder, model MG-55, stainless steel construction, with controller, 1 hp motor, 230 volt, serial# 3511953, built 2006.

10" Ventura Hydraulic Fab Horizontal Ram Extruder

• Manufacturer: Ventura Hydraulic Fabricators

10" Ventura Hydraulic Fab Horizontal Ram Extruder Used 10" Ventura Hydraulic Fabricators horizontal ram extruder, approximately 8" x 12" feed opening with screen changer, hydraulically operated less pump.

Reiloy Usa 192" X 7" X 8" Extruder Screw

• Manufacturer: Reiloy Usa

Made In Usa Name: Extruder Screw | Arrival date: 10-21-2025 | Dimensions l x w x h (inches): 200 x 9 x 9 | Capacity: 192" X 7" X 8" | Weight (lb.): 1545 | Available quantity: 1

Reiloy Usa 194" X 7" X 9" Extruder Screw

• Manufacturer: Reiloy Usa

Made In Usa Name: Extruder Screw | Arrival date: 10-21-2025 | Dimensions l x w x h (inches): 222 x 11 x 10 | Capacity: 194" X 7" X 9" | Weight (lb.): 1425 | Available quantity: 1

0.375" Randcastle Microtruder Extruder, Model RCP-0375

• Manufacturer: Randcastle

0.375" Randcastle Microtruder Extruder, Model RCP-0375 Used 0.375" Randcastle Microtruder extruder, model RCP-0375, .375" diameter singled screw, 24:1 l/d, electrically heated, air cooled barrel, jacketed feed se...

0.375" Randcastle Microtruder Extruder, Model RCP-0375

• Manufacturer: Randcastle

0.375" Randcastle Microtruder Extruder, Model RCP-0375 Used Randcastle RCP-0375 3/8" Single Screw ExtruderUsed .375" Randcastle Microtruder extruder, model RCP-0375, .375" diameter singled screw, 24:1 l/d, electr...

0.25" Brabender Extruder, 48:1 L/D

• Manufacturer: Brabender

0.25" Brabender Extruder, 48:1 L/D Used 0.25" Brabender extruder, electrically heated, air cooled barrel, 48:1 L/D, driven by 2 hp, 180 volt motor with VFD, controls on frame.

3.5" Davis Standard Cold Feed Rubber Extruder

• Manufacturer: Davis-Standard

3.5" Davis Standard Cold Feed Rubber Extruder Used 3.5" Davis Standard cold feed rubber extruder, model 35IN35, electrically heated, water cooled barrel, powered roller strip feeder section, Thermatic gearbox, 17...