Used Hitachi Processing in New Jersey, USA

HITACHI

• Manufacturer: Hitachi

Qty (7) Each: 1500 Gallon Stainless Steel Reactor. Esterification/Polymerization Reactors/Autoclave. High Viscosity side sweep Agitator with 10 and 41 RPM output speeds. Double mechanical seal. Internal Rated 11...

HITACHI ZOSEN MECHANICAL

• Manufacturer: Hitachi

***ON HOLD***UNUSED Hydrotreating (HDS) Reactor. Rated 3240/Full Vacuum @ 850 Deg.F.. 12,000 Gallon. Hitachi Zosen Mechanical. 6' Dia. x 58'5" T/T. Shell & Heads material: 2.25 Cr-1 Mo + 1/8" 347 SS WOL, Perman...

Hastelloy - Clad Hitachi Batch-Type Agitated Reactor - IPP# 203332

• Manufacturer: Hitachi

Purpose: polymerization reactor designed for continuous operation to react, mix, and dry high viscosity materials Twin rotor shafts are heated and rated -1/15 bar @ 400 degrees C. Hastelloy C clad Shell, Hastello...

HITACHI RCUG 150AHYZ1

• Manufacturer: Hitachi
• Model: RCUG 150AHYZ1

Used Hitachi "H Series" air cooled chiller model RCUG 150AHYZ1. 103 tons. New 2011. Chiller utilizes R407C refrigerant, 380, 415 volt/50 Hertz electric. Unit is rated at 363 kW, 103 US rated tons, and 312,000, 18...

HITACHI RCUG 150AHYZ1

• Manufacturer: Hitachi
• Model: RCUG 150AHYZ1

Used Hitachi "H Series" air cooled chiller model RCUG 150AHYZ1. 103 tons. new 2011. Chiller utilizes R407C refrigerant, 380, 415 volt/50 Hertz electric. Unit is rated at 363 kW, 103 US rated tons, and 312,000, 18...

Stainless Steel 316 Hitachi Wiped/Thin Film Evaporator - IPP# 74896

• Manufacturer: Hitachi

jkt rated 125 psi @ 350 deg F 2-zone CS jkt. 10' long evaporation section. 8-blade rotor, mech seal on shaft. Belt driven by 30 HP, 3/60/460 volt, 890 rpm TEFC motor.

Stainless Steel 304 Clad Hitachi Adjust-O-Film Wiped/Thin Film Evaporator - IPP# 247169

• Manufacturer: Hitachi

Stainless Steel 316 Batch-Type Agitated Reactor - IPP# 222564

• Manufacturer: Hitachi

Intended use: high temperature reactor for adhesives and viscous materials Head thickness: 18mm Jacket thickness: 16mm with a Cyclo drive gear reducer, Model VM40-62, ratio 29 to 1, input 1200 - 300 RPM, 26 - 14 ...

HITACHI 37" x 84"

• Manufacturer: Hitachi

Used (5) cane mills tandem of: Make: Hitachi Japan | Year of installation: 1984 | Mill size: Diam.935 X lenght 2135mm | Journal size: Diam.460 X 620 | Journal cd: 3125 | Hydraulic ram diam.: 347mm | Mill apex ang...