Used Engine Lathes in Piedmont, Italy

1998 CMT SUPER URSUS 280 LATHE

• used

• Manufacturer: C.M.T.
• Model: Ursus

Lot LATHE CMT SUPER URSUS 280 Year 1998 Manufacturer CMT Model SUPER URSUS 280 Technical data Height of tips on the bench mm 280 Maximum diameter allowed on the bench mm 560 Max. permissible diameter on the trans...

CMT URSUS 200X1500

• used

• Manufacturer: C.M.T.
• Model: Ursus 200x1500

Typology: PARALLEL LATHE | Tip height on the pallet: 200 mm | Distance between the tips: 1500 mm | Diameter turning on the bench: 405 mm | Max diameter to turn on the carriage: 200 mm | Spindle hole: 51 mm | Tap...

CMT URSUS 200X1500

• used

• Manufacturer: C.M.T.
• Model: Ursus 200x1500

Power: 5.5 HP | Dimensions: 2500 X 1100 X 1600 MM

CMT URSUS

• used

• Manufacturer: C.M.T.
• Model: Ursus

MERLI CLOVIS 28

• used

• Manufacturer: Merli
• Spindle Bore: 105 MM
• Distance between Centers: 3000 MM

Distance between centers: 3000 MM | Cnetre height over bed: 410 MM | Centre height over saddle: 300 MM | Swing over bed: 820 MM | Swing over saddle: 600 MM | Swing on gap: 1080 MM | Bed width: 450 MM | Spindle s...

MORANDO PL 45 X 5000

• used

• Manufacturer: Morando
• Spindle Bore: 80 MM
• Distance between Centers: 5000 MM

Distance between centers: 5000 MM | Number of slideways: 2 | Center height: 460 MM | Swing over bed: 890 MM | Swing over saddle: 710 MM | Swing on gap: 1200 MM | Bed width: 500 MM | Spindle motor power: 20 HP | ...

GRAZIANO SAG 14

• used

• Manufacturer: Graziano

BREDA BRL 250

• used

• Manufacturer: Breda

GMG AP 530

• used

• Spindle Bore: 105 MM
• Distance between Centers: 4000 MM

Distance between centers: 4000 MM | Cnetre height over bed: 530 MM | Centre height over saddle: 380 MM | Swing over bed: 1060 MM | Swing over saddle: 760 MM | Swing on gap: 1400 MM | Bed width: 500 MM | Spindle ...

CMT URSUS

• used

PBR TM 30 X 5000

• used

• Distance between Centers: 5000 mm

Distance between centers: 5000 mm | Swing over bed: 320 mm | Swing over saddle: 215 mm | Bed width: 440 mm | Spindle speed: from 15 to 1500 rpm | Quill diameter: 80 mm | Accesories: 01 toolholder turret, 01 chuc...

OERLIKON DA-P

• used

• Manufacturer: Oerlikon - Leybold
• Distance between Centers: 1000 MM

Distance between centers: 1000 MM | Spindle speed: 31,5 - 2800 RPM | Other details: NOT FILLET | Accesories: MULTIFIX TURRET, COPY, SELF-CENTERING DIAM. 260 MM