Used Book Binding

Muller Martini 4th and 5th knife for 449 3943

• Manufacturer: Müller Martini

4th and 5th knife for trimmer 449 one set of knifes

Stahl koppelmodul 2 4819

• Manufacturer: Stahl

Koppel modul 2, DCT2000-DCT500-DCT2000 to connect TD/KD toTF, FS100 TF KC

Stahl Koppelmodul 2 4820

• Manufacturer: Stahl

Koppel modul 2, DCT2000-DCT500-DCT2000 to connect TD/KD toTF, FS100 TF KC

press

glazing press JULLIEN (Bruxelles) n°3285, size 54x70 cm smoothing and packing/baling press with percussion/striking wheel for all pressing processes in bookbinders, printers and other etablishments working up pap...

Turning-in machine Schmedt Präkant 0601

• Manufacturer: Schmedt

Turning-in machine Schmedt Präkant 0601; good condition; cleaned and checked; new turning -in cloth; new pressing rollers; new bearings; max.size 600x600mm, min,150x150mm; max. board thikness 6mm, min.1,5mm.

Corner rounding machine Gämmerler 105 M

• Manufacturer: Gammerler

Corner rounding machine Gämmerler 105 M; good condition; knife 52mm; max pile hight 80mm; bigger table with size 80x60cm; can also used without the bigger table; for option is knife with 3mm. Elektrische Eckenru...

Block guing machine Müro 5000/A3 WT

• Manufacturer: Müro

Block guing machine Müro 5000/A3 WT; good condition, cleaned and checked; floor mounted machine; 2x dryer, heating sheet, max.width 525mm; max.height 525mm. Blockleimpresse Müro 5000/A3 WT; guter Zustand; gerein...

2008 O.M.M GALAXIA 2T

• Manufacturer: O.M.M

All-pressed steel stapling motor-operated machine OMM Galaxia 2T art. 665 n°1336 year 2008 equipped with 2 adjustable heads minimum head-to-head distance of 55 mm and maximum distance between the two heads of 21...

Jogger Müro

• Manufacturer: Müro

Jogger Müro; cleaned and checked;size 52x33cm; adjustable in jogging; table top machine; two on stock.

2008 Cover gluing machine Zechini Gamma

• Manufacturer: Zechini

Cover gluing machine Zechini Gamma; demo machine; max.book thikness 10cm; working width 420mm; used for cold gluing. Deckenanleimmaschine Zechini Gamma; wurde nur zu Vorführzwecken gebraucht; max.Buchstärke 10cm...

2012 HORIZON BQ-150

• Manufacturer: Horizon

Perfect Binding Machine HORIZON BQ-150 N° 355002 year 2012.Hot Melt Glue The Cover stock is glued to the book spine and clamped for a neat, square-spined finish. Simple Operation, the Horizon BQ150 Perfect Bind...

TRANKLEIN

• Manufacturer: Karl Traenklein

Corner rounding machine TRANKLEIN, stand model foot drive

1992 HÖHNER ECONOMY 25/40

• Manufacturer: HÖHNER

Wire-stitching machine HÖHNER ECONOMY 25/40 n°92.025.1314 year 1992 Stand model, One head, Flat & saddle stitching from 2 sheets to 25 mm (40 mm with clenched staples), Max. stitching speed : 206 staples/min.,...

1990 HANG 106 DT

• Manufacturer: Hang
• Model: 106 DT

two-spindle machine HANG 106DT n°90251 of 1990, stand model, operated by electric foot switch, 2 heads, hole spacing adjustable from 50 to 400 mm, drilling range 3-20 mm diameter, throat depth : 300 mm, size...

BOSTITCH N°7

• Manufacturer: Bostitch

Wire-stitching machine BOSTITCH BOSTON N°7 serie n°772301., Stand model, 1 stitching head, Flat and saddle stitching from 2 sheets to 15 mm, For flat wire N°II & III (20x24,20x25,21x25), Round wire n°25-28, ...