Used Machine Tools in Saxony, Germany

Röhm SSH 200/3 (Nr. 43)

• Manufacturer: Röhm

stationärer Spannstock SSH 200 Kraftspannfutter, hydraulisch Kraftspannung 53 kN Merkmale: Futterflansch Ø 280 x 17mm mit Spann-Nut 4x / 18x30mm Grundflansch Ø 290x30mm Flanschaufnahme Ø 140x10mm 20 Satz div. For...

Röhm Duro-NCES 260 77/3 (37)

• Manufacturer: Röhm

Merkmale: neuwertig automatisches spannen Spannbereich außen 120mm Spannbereich innen 50mm Flanschenaufnahme innen Ø170 x 6mm

SMW Autoblock 105510 (Nr.40)

• Manufacturer: SMW Autoblock

Power chuck, automatic clamping Features: Equipped with forming jaws Clamping range min./max. 60 / 320mm Flange mounting Ø 295x5mm inside; mounting 3x holes Ø 21mm and pitch circle Ø 230mm

Forkardt KS 400 (Nr. 45)

• Manufacturer: Forkardt

Power chuck, mechanical Features: Power flange AKS 315/5 Clamping range min./max.: 60/240mm Flange mounting size Ø 300x5mm inside; fastening 3x hexagon socket screws Ø 20mm and 3x holes Ø 20.5mm / pitch circle Ø ...

WMW PS 300

• Manufacturer: WMW

technical features: - 4 jaw chuck, manual feed, clamping range: outside= max. Ø 280mm as well as inside=min. Ø 40mm

PAGUS pipe vice

• Manufacturer: Pagus

Pipe vice, round material vice PAGUS used, checked ! upper jaw holder broken !

ALLMATIC NC high-pressure clamps

• Manufacturer: ALLMATIC

NC high-pressure clamp with hydraulic spindle ALLMATIC - NC LC125 including one set of stepped jaws ! used, tested !

S3764

INSTRON® grips

• Manufacturer: Instron

Grips, Grippers, Side-Acting Pneumatic Pull Grips, Top + Bottom INSTRON® 2712-046 Mounting: Ø 32 mm, Length: 45 mm, 1x Bore: Ø 12.5 mm Used, tested!

S3285

• Manufacturer: Pagus

Emulsion mixing station, emulsion mixer, proportional dosing unit DOSATRON® D3RE2 3 m³/h 0.2-2% Control cabinet: RITTAL AE1037.500 LDT Empty signal with flash lamp: RS 236-262 230 V AC, 2 Watt, 50Hz approx. 2.8 m...

PAGUS bearing block

• Manufacturer: Pagus

Bearing block, counter bearing for milling spindle PAGUS Ã 48 mm x 145 mm Distance of spindle center - top edge of dovetail: 145 mm Dovetail guide: 118 /90 mm, height: 21 mm, width: 65 mm used, tested!

STANKO top slide

• Manufacturer: Stanko

Top slide with simple steel holder STANKO Guide pin. Ã 30 x 11 mm simple steel holder, rotatable 360 Insertion height: 50 mm, insertion width: 40 mm, length: 113 mm used, tested!

HENNIG telescopic cover

• Manufacturer: HENNIG

Telescopic cover, telescopic spring HENNIG STABILASTIC® Bandwidth. 120mm MaterialDONOTTRANSLATEFDOUBLE POINTEarth steel New !

ORTLINGHAUS mechanical clutch

• Manufacturer: ORTLINGHAUS

mechanical clutch ORTLINGHAUS CLUTCHES serial no. 88-14119 with thrust bearing and additional shift ring New !

WMW mechanical clutch

• Manufacturer: WMW

mechanical clutch, multi-plate clutch WMW, DRESDEN CLUTCH FACTORY 10 - TGL 20767 used, tested!