Used Machine Tools in Saxony, Germany

WMW AW 400x450x985

• Manufacturer: WMW

1 piece T-slot to DIN 650: T-slot width a=28; h= 42; b= 47; c= 19.5 mm, T-slot spacing 160 mm Foot clamping with slotted hole Ø 22 x 300 mm

WMW AW 190x315x500 (Nr.16)

• Manufacturer: WMW

1 piece in the back of the photo T-slot to DIN 650: T-slot width a= 28; h= 42; b= 47.5; 19.5 mm, T-slot spacing 160 mm

WMW AW 500x260x795 (Nr. 20+21)

• Manufacturer: WMW

2 pieces available (price per piece) without T-slots Foot clamping slotted hole Ø 39 x 130 mm

Binder MPS 800x315

• Manufacturer: Binder

Magnetic clamping plate Magnetic strips 18x, width 20mm, distance 40mm

WMW AW 600 x 500

• Manufacturer: WMW

2 pieces available (price per piece) with slotted holes Material made of cast steel Surface finished

Tool milling machine TOS FN 20

• Manufacturer: TOS

Table size [mm]: 600 x 240 Tool holder: SK 40 Speed range [1/min]: 50 - 2500 Travel [X / Y / Z mm]: 300 / 200 / 350 Equipment / accessories: Vertical head with quill, counter bearing

FEIN tin snips

• Manufacturer: Fein

Sheet metal shears, high-frequency sheet metal shears, high-frequency tool, high-frequency machines FEIN QSz 838 0.24 kW 1850 strokes/min 265 V 3AC 200 Hz approx. 3.5 m connection cable used, tested!

Stimin FUS 32 tool milling machine

Table size [mm]: 950 x 450 Tool holder: SK 40 Speed range [1/min]: 25 - 2000 Equipment / accessories: Digital display Sony in 3 axes, milling head can be swiveled down with manual quill, counter bearing, coolant ...

MMZ15

• Manufacturer: Pagus

Machine vice WMW SX200 used, tested !

WMW SP 5040x2230x460

• Manufacturer: WMW

Machine table can be used as clamping plate. - material - cast steel - clamping surface 4100 x 2230mm - outlet part lateral (at the side) = W: 2110 x L: 1040mm T-slots according to DIN 650 - b=54.0; c=21.0; h=55....

GARANT shrink chuck kit

• Manufacturer: Garant

Shrink fit kit, shrink chuck WARRANT 302,325 SK 40 Used!

WMW milling head

• Manufacturer: WMW

Milling head , Drilling head , Angle head WMW, WEMA Engelsdorf UA1 Rotatable 360° in two levels Hollow shaft (drive): Ø 28 mm, wedge width: 6 mm used, checked!

bolster plate AP 2500x1250x100 (Nr.1-2)

Cast steel The plates are machined before the T-slot with 75mmx60mm(recessed) Table surface 2530mm X 1245 mm Longitudinal slot: Number: 5 Size:a=32, h=53, b=54, c=23mm Center distance 250mm 2 slots Chamfered 8 th...

GÜHRING sealing plug

• Manufacturer: Guhring

Sealing plugs, 6 pieces GÃHRING GM300 4985 63,000 16136705 used, tested!

1994 WMW 620x160

• Manufacturer: WMW

4 jaws faceplate flange intake/diameter : passage drill hole 160 mm flange diameter 197mm hole circle 235mm jaws are single guided with chuck key The given info are approx. values!