Used Processing in Ontario, Canada

Blower

-Shipping dimensions: Width 13 1/2" x Height 16 1/2" x Length 17" -HP .25 -V 200 -3 Phase -Hz - 50 / 60 -19 kg

Ametek Rotron Regenerative Blower

• Manufacturer: AMETEK Powervar

-CATEGORY: Blowers/ fans -Model DR979-BE-72-W -Part # 080704 -15 hp, 230/460 volt -3500 rpm -4" ports -1100 scfm -UNUSED -Stock Number: C9304 -Manufacturer: AMETEK -Model: DR979 BE 72 W

11' Pleated belt conveyor

-Shipping dimensions: 40" tall x 137" long x 18" wide -Pleated belt is 6" wide -Can be stationary or wheeled in to place -Height is adjustable -0.25 HP

Daltec Blower

• Manufacturer: Daltec

-Volt: 575 -Phase: 3 -RPM: 1735 -HP: 0.5 -The Fan body is stainless steel -HP: 2 -We have 3 in stock

Signode Power Strapping Machines

• Manufacturer: Signode

-Maximum cycle speeds vary from 575 to 1500 straps per hour -Strap feed and take -Up speed is 5.3 feet per second -230/460 V -Model number: MCD 700

168 Litres tank with mixer on the bottom

-Tank dimensions:23" heigh x 24" wide. -Over all height 44" -4 legs are 22" tall -Off spout side of bottom is 2.5" diameter -Open top with lid -Cone bottom -37 IMP gall

2 Stage high vac Airtech system

• Manufacturer: Airtech

-Rotary vane vacuum pump with booster -AC500 Booster: Weg motor has 2.2 (3.0) HP, 50HZ, 220/380 Volts, 7,81AMPS, model: 00236ET3WAL90LFF-W22 –L63 Vacuum pump motor: 3HP, 1760RPM, 230/460 Volts –Shipping dimension...

Strong Hold SS Storage Cabinet

CATEGORY: Miss -60" wide x 30" deep -peak top -82" high at front, 92" high at back -2 sections (24" on left, 36" on right) -(1) sliding SS drawer -(1) lower shelf -(2) 110 volt outlets on back -(4) adjustable hei...

Shaker table Riser

-Shipping dimensions: Height 10" X Width 58 1/2" X Length 69 1/2" -Side shoot diameter: 8" -3 in stock -50" diameter

Fuji Ring Compressor

• Manufacturer: Fuji Electric

-Shipping dimensions: length 12" x width 12" x height "12 -Input/Output: 1.5" -3 phase -2 Poles -50/60 Hz -575 Volts -Output Hp: 1.1 -Max Amps 1.3 -Max H2O: 54.5 -Max CFM 98

Day Ribbon Blender

-Sew-eurodrive motor: 330/575 V, 7.50 HP, 1720 RPM, -5/16 jacket thickness -3/8 shell thickness -Walls have an extension that can be taken off -Shipping dimensions: 48” width x 120” length x 66” height with base ...

Clamp on Mixer with Weg Motor

• Manufacturer: WEG

-0.750" shaft diameter needed -Phase 3 -HP: 0.33 -Volts: 575 -RPM: 1730 -Amps: 0.44

1,900 Litres stainless steel tank with mixer

• Manufacturer: Alfa-Laval

-500 US Gallon -ALFA-LAVAL Jacketed Stainless Steel Mixing Vessel -With Overhead Prop Mixer -80 psi. -Max steam pressure, plate reads 100psi @300F Max W Pressure -20f @100psi Min Des. -Ser. 14972.1 -Made in Canad...

Nettco Clip-on Agitator

-Comes with Genesis AC motor speed control hybrid drive -Shaft diameter: 1" -Model: NSPG-050 -SN: P72311A-1 -Motor: -HP: 0.33 -Volts: 230/460 -Amps: 1.6/ 0.8 -RPM: 1725 -Hz: 60 -Phase 3

Pneumatic Vibrator

• Manufacturer: Netter

-Shipping dimensions: 5" L x 3" W x 8" H -Netter PKL 135