Used Processing in Romania

T Shirt Bag Making Line LEMO INTERMAT 2

• Manufacturer: Lemo
• Model: Intermat

T-Shirt Bag Making Line, Comprising Of The Following Main Components, Unwinder: For Tubular Or Folded Film. Longitudinal Cutting Section: With 2 Knives (Splitting Into 3 Lanes). Longitudinal Welding Unit. Folding...

Three (3) Film Extrusion Lines MEP 60/1200 (Romanian Make)

Set of three mono-layer polyethylene blown-film extrusion lines, Comprising Of The Following Main Components, Extruder: Estimated Screw Ø 60 mm. Die Head: Approx. Ø 180 mm (Single-Layer). Air Ring & Tower: Standa...

HDPE MDPE Blown Film Extrusion Line Kang Chyau KMH 55CE

Blown Film (HDPE / MDPE) Production Line, Comprising Of The Following Main Components, Extruder: Screw Ø 55 mm, L/D Ratio 32:1, AC 25 HP Motor With Inverter. Die Head Ø 100 mm, Air Ring Ø 180 / 230 mm, Cooling Bl...

Plastic Granulator Grinder TRIA 60 42 XT

• Manufacturer: Tria

Granulator/Grinder Machine (High Speed Rotor), Comprising Of The Following Main Components, Hopper Opening: 620 × 420 mm. Rotor Diameter: 360 mm. Blades: 3 Rotor + 2 Fixed (Optionally 5 + 2). Motor: 30 kW (Electr...

Laboratory Small Plastic Granulator TRIA S.p.A LCE Series

• Manufacturer: Tria

Slow Speed Granulator / Edge Trimmer Grinder, Comprising Of The Following Main Components, Drive Motor: BONFIGLIOLI M2SB4 – 1.1 kW / 1.390 rpm. Gearbox: BONFIGLIOLI A41 2 UH45 S2, Ratio 53.1:1 (Built 11/2007). Cu...

Plastic Pelletizing Line CDM Engineering ES 105

• Manufacturer: CDM Engineering srl

Plastic Compounding / Pelletizing Line (Single Screw, Degassing), Comprising Of The Following Main Components, Single-Screw Extruder: Screw Ø105 mm, With Degassing And Screen Changer. Granulation Head: Diameter A...

T Shirt Bag Making Line GÜR İŞ MAKINA HS 1000P + DD700

T-Shirt Bag Making Line (Two Tracks, Hydraulic Punching), Comprising Of The Following Main Components, Film Unwinder: With Pneumatic Shaft. Hot Knife Longitudinal Cutter: Splitting 1.100 mm Film Into 2 Tracks. Cu...

Bottom Seal & Courier Bag Making Machine HEMINGSTONE JP 32SE SV AM

Automatic Bag Making Line (Perforation And Seal-Strip Application), Functions: Bottom Sealing, Film Perforation, Adhesive-Tape (Seal-Strip) Application Unit. Perforation System: 6 mm Holes. Downstream & Auxiliary...

LDPE LLDPE Blown Film Extrusion Line Kang Chyau KML 65S CE

Blown Film (LDPE / LLDPE) Production Line, Comprising Of The Following Main Components, Extruder: Screw Ø 65 mm, L/D 32:1, AC 60 HP Motor With Inverter. Die Head Ø 200 mm, Air Ring Ø 230 mm, Cooling Blower: 7.5 H...

Blow Moulding Machine for Large Containers

Extrusion Blow Moulding (EBM) Machine (10 Litre, Accumulator Head), Comprising Of The Following Main Components, Extruder Type: Single Screw With Accumulator Head. Mould Clamping System: Hydraulic. Downstream & A...

Plastic Granulator Grinder TRIA 60 42 XT

• Manufacturer: Tria

Granulator/Grinder Machine (High Speed Rotor), Comprising Of The Following Main Components, Hopper Opening: 620 × 420 mm. Rotor Diameter: 360 mm. Blades: 3 Rotor + 2 Fixed (Optionally 5 + 2). Motor: 30 kW (Electr...

Set of Moulds and Tooling for Injection Moulding Machines

Injection Moulding Tooling / Mould Assemblies Lot, Comprising Of The Following Main Components, Mould Assemblies: Approx. 15–20 Assemblies Of Different Dimensions And Configurations. Core And Cavity Components: S...

Injection Moulding Machine MANNESMANN DEMAG D 300 1190 NCIII

• Manufacturer: Mannesmann Demag - Meer

Injection Moulding Machine (IMM) (300 Ton Clamping Force), Comprising Of The Following Main Components, Clamping Force: 300 Tons. Injection Capacity: 1.190 cm³. Downstream & Auxiliary Equipment: Control: NCIII (N...

Airmaster B5900B 270 Air compressor

Maximum pressure: 11bar; Tank capacity: 270L; Motor power: 5.5 HP (4 kW); Weight: 142 kg; Noise Level: 95-97 dB(A); Configuration: Twin cylinder, belt driven, mounted on air receiver

Plastic Granulator Crusher

Granulator / Crusher (Belt-Driven Rotor), Comprising Of The Following Main Components, Rotor Type: Open, Multi-Knife Configuration (Exact Number Not Visible). Feed Opening: 500 × 500 mm, Construction: Steel Frame...