Used EDM Machines

Trusted Seller
Auction
2010 Makino DUO43 Wire Electrical Discharge Machine (EDM) 22" x 27" Work Table, 34" x 30" x 24" Diel...
- Manufacturer: Makino
- Model: Duo43
2010 Makino DUO43 Wire Electrical Discharge Machine (EDM) W120110 22" x 27" Work Table, 34" x 30" x 24" Dielectric Well, 12" x 18" XY Travels, Auto Wire Feed, Wire Recovery System, Pendant, Makino MGN-SG Controll...
Saginaw, MI
Visit Auction Website
Elox 8-2012 Sinker EDM Machine
Specifications*: SPEC Below for Elox 8-2012DR, should be similar, buyer should verify before purchase EXPECT FINISHES OF 125 Ra AND TOLERANCES OF +/-0.003″ 280 VOLT – 60 AMP Stroke – 8″ Plate Size – 9″ x 9″ Open ...
Posen, IL
Trusted Seller
NEC EHV-163-238670 Power Supply Circuit Board Unit Makino EDM CNC
- Manufacturer: NEC
Used, In Working Condition. Removed From a Working Environment. *Dusty From Storage* One Ceramic Insulator Missing Between Shunt on Back End. If this item ships as Flat Rate Freight please see details in Shippin...
$840 USD
Millersburg, IN
Trusted Seller
1998 Brother HS5100 Wire Electrical Discharge Machine
- Manufacturer: Brother
Brother HS5100 Wire Electrical Discharge Machine (1) Complete for parts machine & a 2nd identical machine that has been parted out -- parts on pallet for the 2nd machine
Toledo, OH
Trusted Seller
Como Filtration 210 Portable Filter Cart Hydraulic 11GPM 120V 3/4 Hp EDM
- Manufacturer: Como Filtration
Used, in Good Working Condition, Tested OK. Specs show this if for an EDM. Designed for EDM fluids. Each tank is rated for 20 pounds of dirt and 1 gallon of water. 3/4Hp Leeson Motor. 120V single phase. 60 PSI 11...
$4,275 USD
Millersburg, IN
EDM DRILLMATE 22I
- Manufacturer: EDM DRILLMATE
Equipped with: - This machine can by run unattended by nc programming or can run manually with XY handles - Digital Readouts X, Y & Z - Glass Scales X, Y & Z | Hole-dia. (min): 0.004 in | Hole-dia. (max): 0.157 ...
Oak Park, IL
Charmilles 811073 F Roboform 40 EDM Machine Power Supply Board PCB 852 449 D
- Manufacturer: Agie - Charmilles
“Used item as seen in the images. 30 day warranty included.” Charmilles 811073 F Roboform 40 EDM Machine Power Supply Board PCB 852 449 D 7-ZZ6H-72209-CS
$576 USD
Baroda, MI
Trusted Seller
15 KVA CAMMANN “C76A” METAL TAP DISINTEGRATOR w/360-DEGREE ARM & HEAD ROTATION - POWER HEAD FEED
- Manufacturer: Cammann
- Model: C-76
#C76A CAMMANN METAL/TAP DISINTEGRATOR SERIAL NO 102186, MODEL C76A Imperial Metric EQUIPPED WITH: #CMBL CAMMANN HEAD & HEAD HOUSING CAMMAMATIC HEAD FEED 25 GALLON BUILT-IN COOLANT SYSTEM CATALOG SPECIFICATIONS: A...
$2,450 USD
Cincinnati, OH
Elox 8-2012-DR Sinker EDM Machine
Specifications*: EXPECT FINISHES OF 125 Ra AND TOLERANCES OF +/-0.003″ 280 VOLT – 60 AMP Stroke – 8″ Plate Size – 9″ x 9″ Open Height – 9″ to 17″ Throat Clearance – 17.25″ Worktable Size – 20″ x 12″ Worktable Mov...
Posen, IL
Trusted Seller
Mitsubishi DWC-90Ha Edm, Not Operational
- Manufacturer: Mitsubishi
- Model: DWC-90
Cornelius, NC
2021 EDM DRILLMATE 22I
- Manufacturer: EDM DRILLMATE
Equipped with: 12 station electrode changer | Hole-dia. (min): 0.008 in | Hole-dia. (max): 0.118 in | X: 16.0 in | Y: 12.0 in | Z: 19.0 in | Work-w: 21.5 in | Work-l: 14.0 in | Cnc controlled: Yes
Oak Park, IL
2019 Makino U3 Wire EDM
- Manufacturer: Makino
- Model: U3
0.05 Micron Scale Feedback (X,Y), Automatic Wire Threading Unit, Dielectric Fluid Height Setting Function, PICO Precision Guide System The 2019 Makino U3 Wire EDM is designed for manufacturers who value precision...
Schaumburg, IL
2001 MITSUBISHI EDM FA20
- Manufacturer: Mitsubishi
- Model: FA20
X: 19.6 in | Y: 13.8 in | Z: 11.8 in | Max. workpiece dimensions: 31.5 x 23.6 x 8.5" | Max. workpiece weight: 1760 Lbs. | Auto threading (yes/no): Yes | Submerged (yes/no): Yes | Taper angle: 15.0 | Taper height...
Oak Park, IL
Trusted Seller
Mitsubishi FA10M Submersible Wire Edm
- Manufacturer: Mitsubishi
- Model: FA10M
Cornelius, NC
1999 MITSUBISHI EDM EA8
- Manufacturer: Mitsubishi
- Model: EA8
Equipped with: - Fan type cooler | X: 11.8 in | Y: 9.8 in | Z: 9.8 in | Table size-w: 13.7 in | Table size-l: 19.6 in | Worktank inside dimensions: 30 x 20 x 10" | Max. workpiece weight: 1210 Lbs. | C-axis: Yes ...
Oak Park, IL
Agie - Charmilles CUT AM500 EDM machine
- Manufacturer: Agie - Charmilles
- Model: CUT AM500
Good condition Agie - Charmilles CUT AM500 EDM machines manufactured in 2021. Located in USA and other countries. Click request price for more information.
USA