- Trusted Seller
Atlas-Copco GA18 + FD506
- Manufacturer: Atlas-Copco
- Model: GA 18+
Motor: 18.5 kW Start Amps: 84.9 Amps / Full load: 36.4 Amps
Deinze, Belgium - Trusted Seller
Atlas-Copco GA90VSD + FD230
- Manufacturer: Atlas-Copco
- Model: GA 90
tank 2000 liter capacity: 16,2 m3/min pressure: 7,5 bar power: 90 kW with FD230 air dryer
Deinze, Belgium - Trusted Seller
Andouart Ø 26 mm
- Manufacturer: Andouart
Extrusion of plastic tubes max Ø 26 mm screw Ø 60 11 kW Includes extrusion bench, vacuumcooler, drawing bench cutting device Will only be sold in combination with the following lines: Samafor 81 click here S...
Deinze, Belgium - Trusted Seller
Andouart Ø 26 mm
- Manufacturer: Andouart
extrusion of plastic tubes or profiles Max Ø 26 mm Screw Ø 60 14 kW Includes extrusion bench, vacuumcooler, drawing bench cutting device Will only be sold in combination with the following lines: Samafor 81...
Deinze, Belgium - Trusted Seller
Future Controls Ms-101 Injection mold-testing device
- Manufacturer: Future Controls Ms-101
Mold Sampler: device for making prototype moulds. A plastic substance is heated and injected into the mould. mounted on mobile table incl accessories pressure: 4-6kg/cm2
Deinze, Belgium - Trusted Seller
Netstal N235-90MP injection moulding
- Manufacturer: Netstal
klemkracht 900 kN injectiekracht 196 kN openingsruimte 125 - 300 mm matrijsruimte 200 - 500 mm inbegrepen: tempereereenheid trechter / mixer zonder gereedschap
Deinze, Belgium - Trusted Seller
Mobile mixer IMF 30-60t/h
- Manufacturer: IMF
Total dimensions: Length: 15960 mm; Width: 6720 mm; Height: 8500 mm With filter 6.500 m³/h (CAMFIL Farr) With compressor 500 l With SIEMENS S7-300 control system With tank for resin 1000 l and hardener 600 l With...
Amel, Belgium - Trusted Seller
Green sand mixer BMD TM240
- Manufacturer: BMD
Capacity: ±60t/h | Batch weight: ±1.5t | Cycle time: ±105s | Electrical power: ±250kW
Amel, Belgium - Trusted Seller
Moisture balance METTLER
- Manufacturer: Mettler - Toledo
Dimensions: Length: 320 mm; Width: 200 mm; Height: 270 mm Max weighing capacity: 360 g, min weighing capacity: 0.5 g
Amel, Belgium - Trusted Seller
Core shooter LAEMPE L40
- Manufacturer: Laempe / Röperwerk
External dimensions: Length: 3350 mm; Width: 3000 mm; Height: 3340 mm With new cabin Maximum core box size: Width: 1190 mm; Depth: 1000 mm; Height: 790 mm (for horizontal boxes) Maximum span: 1200 mm; minimum spa...
Amel, Belgium - Trusted Seller
Sand compactability tester GF; PVG
- Manufacturer: GF
Dimensions: Width: 215mm, Depth: 610mm, Height: 530mm
Amel, Belgium - Trusted Seller
Polisher grinder MECAPOL PRESI, Ø 200mm
- Manufacturer: Presi
External dimensions: Length: 350 mm; Width: 380 mm; Height: 200 mm With water sprinkler With 7 additional plates
Amel, Belgium - Trusted Seller
Compressor ATLAS COPCO GA55FF 605m³/h
- Manufacturer: Atlas-Copco
- Model: GA 55
External dimensions: Length: 2000 mm; Width: 1000 mm; Height: 1950 mm
Amel, Belgium - Trusted Seller
Induction furnace INDUCTOTHERM 3 x 6t
- Manufacturer: Inductotherm
With control 5140kVA; 4500kW; 200Hz With 2 transformers Primary voltage: 10500V; Secondary voltage: 595V; 50Hz; 2570kVA Melting and holding warm possible at the same time With loading machines With water pump sta...
Amel, Belgium - Trusted Seller
Dust filter WAM 300m³/h
- Manufacturer: WAM GROUP
External dimensions: Length: 1500 mm; width: 1350 mm; height: 3000 mm 22 filter cartridges: Length: 740 mm Pneumatic cleaning
Amel, Belgium 
CompAir RA111 Industrial Compressor
- Manufacturer: CompAir
- Model: RA111
Good condition CompAir RA111 Industrial Compressors manufactured in 2000. Located in Belgium and other countries. Click request price for more information.
Belgium
Tip: Enter manufacturer, model or keyword
