Used Processing in Canada

227 Litres above ground steel tank for fuel/Oil
- Manufacturer: Hassco industries inc
-Shipping dimensions: length 36" x width 26" x height 60" -Double wall, ULC rated -227 L -2.5mm thick primary tank
$307 USD
Brant, Canada
60 Litres Tank with Pneumatic Lightnin Mixer
- Manufacturer: Inox
-Shipping dimensions: length 35" x width 35" x height 49" -316 Stainless -M.A.W.P: 0.42V/10 PSIG -Temp: 300 F -60 L
$2,156 USD
Brant, Canada
Trusted Seller
1998 48" 100psi Sweet Vertical dual Separator
- Manufacturer: Kanbulo Industries Inc.
Packager: Kanbulo Industries Inc. | Service type: Sweet | Pasc condition rating: B | Skidded: Yes | Housed: Yes | Connection status: Connected | Vessel only: No | Separator type: dual | Diameter: 48" | Diameter(...
Buffalo, Canada
Fuel Separator
$258 USD
Saskatchewan, Canada
In-Line Oiler
- Manufacturer: Alliance Group Inc
CATEGORY: Pumps/ other -Manufacturer: Alliance Group Inc -Model number: MAG3-9PVS (3X3) -Serial number: 11932
$146 USD
Brant, Canada
Hartzell Blower
- Manufacturer: Hartzell
-Inlet width: 35" -Inlet height: 27.5" with Camfil filter holder -Outlet diameter: 24.5" -Manufacturer: Hartzell Air Movement -Model number: A54-H-217VB---STFQL -CFM: 2520 -SP: 5 -Mtr. HP: 5 -Fan RPM: 2723 -Mtr. ...
$3,509 USD
Brant, Canada
60" Sweeco Separator
-Last use was for lime dust -60" diameter -Model number is MXCCC152CBTSFTLWC -Serial number SS3105-A0C/11 -2.5HP -3 Phase -5/5 volts -3.4 AMPS -1160 RPM -Shipping dimension: 75" the widest diameter x 50" tall -We...
$13,157 USD
Get financing
Est. $258/mo
Brant, Canada
940 Litres stationary tank
-Open top with lid -Stationary with fork lift accessible flat bottom -Diameter is 32.5" -Height is 47.5" -207 IMP
$716 USD
Brant, Canada
Lightnin Mixer
- Manufacturer: Lightnin
Model:N33G-33, HP:1/3, Volt:115, Phase:1, RPM:1725,
$804 USD
Brant, Canada
922 Liter Horizontal Tank
- Manufacturer: Sharpsville Container
-203 IG -MAWP 100 psi @250 F -MDMT -20 F @ 100 psi -9" from the ground to the bottom -64" tall -Certified by Sharpsville container
$3,509 USD
Brant, Canada
5 HP Scott Hammer Mill
-Shipping dimensions: length 49" x width 40" x height 30" -Model: Sh18-12 -5 HP -208-230/460 Volts -15-23.2/6.6 AMPS -1725 RPM -3 phase
$1,316 USD
Brant, Canada
Trusted Seller
WILSON SNYDER 85-25 Quintuplex Plunger Pump
- Manufacturer: Snyder
Used Wilson Snyder 85-25 Quintuplex Plunger Pump, 4.5" metal plungers x 8" stroke, steel fluid end, wing guided A/R valves, rated to 600 HP input
Neilburg, Canada
Trusted Seller
Twin Disc C-108-HP5 PTO/Over Center Clutch
- Manufacturer: Twin Disc
Used Twin Disc C-108-HP5 PTO/Over Center Clutch, Spec 101031 H, complete, turns good, appears in good condition.
Neilburg, Canada
Trusted Seller
Gardner Denver GD45T Triplex Injection Pump
- Manufacturer: Gardner Denver
Used frame for Gardner Denver GD45T (PS-25) triplex pump, bare case
Neilburg, Canada
Trusted Seller
Gardner Denver PQ-2 (TQB)Triplex Injection Pump
- Manufacturer: Gardner Denver
Used bronze fluid end for Gardner Denver PQ-2 triplex pump, bare, no internals
Neilburg, Canada
Multivac R230 Packaging Machinery
- Manufacturer: Multivac
- Model: R230
Good condition Multivac R230 Packaging Machinery available between 2001 and 2003 years. Located in USA and other countries. Click request price for more information.
USA