Used Processing in Taiwan

1988 Conveyor

Iron support roller, length: 1 m

1980 PVC Extruder

• Manufacturer: ROYLE

1. screw diameter: Φ90mm | 2. l/d ratio: ** 20 | 3. compression ratio (cr): 2.7 | 4. heated zones: *3 zones | 5. applicable material: ** PVC

1998 Automatic Packaging Machine

• Manufacturer: YASHIN

Applicable specification: IV 1.2 – 2.0 | Maximum line speed: 180 m/min | Length: ** 100 m/reel

1979 Packaging Machine

• Manufacturer: PEWC

Applicable conductor: 60 mm and above, with no limitation on width or height | Tape width: 9, 12, 15 mm | Tension range: 15–50 kg”

1984 Packaging Machine

• Manufacturer: PEWC

Applicable reel height: 2 m | Applicable reel width: 1 m | Maximum load capacity: 3 tons

1990 Die Cleaning Water Tank

• Manufacturer: HYDRAULIK

Stainless Steel Tank Body, Suitable for Fresh Water and Certain Solvents

1992 Heat Exchanger

• Manufacturer: Sumitomo

Pressure resistance: 10 kg | Fluid: Nitrogen

2008 PDV1 Outer Conductor Extruder – Low Smoke Non-Toxic Spiral

• Manufacturer: Anmei

Diameter: ψ90mm | Applicable speed: below 20 rpm | L/d: 19.2 | Cooling: water-cooled

2011 PDV1 Outer Conductor Extruder – Composite Rubber Deep Groove Spiral

• Manufacturer: Anmei

Diameter: φ90mm | Applicable speed: below 15 rpm | L/d: 19.2 | Cooling: water-cooled

1980 Annealing Furnace

Winding and Take-up for Mid-extension Machine

1978 Vacuum Softening Furnace Tank

Load capacity: 500 kg

1973 Vacuum Softening Furnace

Load capacity: 500 kg

1980 Annealing Furnace

Winding and Take-up for Mid-extension Machine

1984 CA2 Vacuum Heating Furnace

• Manufacturer: Sanfeng-cm

Load capacity: 500 kg

1990 PVC Pelletizing Metering System

Simultaneous Conveying Materials (4 Types) 1. PVC powder 2. Oil 3. Plasticizer 4. Additives