Used Material Handling

MINI STUMP GRAPPLE
Wolverine 44” mini skid steer stump grapple bucket, never been used
Utica, OH
MINI STUMP GRAPPLE
Wolverine 44” mini skid steer stump grapple bucket, never been used
Utica, OH
Trusted Seller
Serco Hydraulic Dock Leveler 71" Wide Cylinder Lift No Controls 115V Power Unit
- Manufacturer: Serco
Used, in Good Working Condition. Removed From a Working Environment. This is setup with hydraulic power unit. 115V. No controls. The flip plate is 5/8" diamond plate. 71.25x20" This not a light duty unit. Main p...
$6,500 USD
Millersburg, IN
SCHENK ACCURATE MATERIAL FEEDER 16764
- Manufacturer: Schenck
Schenck AccuRate material feeder, S/N 55740-06A-MECGM. Stainless steel construction live hopper, two 1/4″ OD auger screws, 26″ long discharge. Model PWS-17238 load cell. Includes controls.
Elk Grove Village, IL
Trusted Seller
EMI CP-2497 DRAWER MAGNET Used
- Manufacturer: EMI
72.69 MM DIAM INLET / OUTLET TOP FLANGE APPROX 7 X 7 TOP FLANGE 5 X 5 CENTER TO CENTER HOLES TOP FLANGE APPROX 6 X 6 BOTTOM FLANGE 5 X 5 CENTER TO CENTER HOLES BOTTOM FLANGE APROX 73.06 MM DIAM INLET / OUTLE...
$399 USD
Holly, MI
Trusted Seller
METAL FABRICATOR Drawer Magnet USED
- Manufacturer: METAL FABRICATOR
07.52 mm Diameter Inlet / Outlet Top Flange Approx. 6.5" x 6.5" Top Flange 85.69 mm Diameter Inlet / Outlet Bottom Flange Approx. 1.5" Cone Height 1.5" Cylinder Height 6.5" x 6.5" Bottom Flange 5.25" x 5.25...
$399 USD
Holly, MI
Trusted Seller
METAL KATCHER Drawer Magnet USED
- Manufacturer: METAL KATCHER
63.32 mm Diameter Inlet / Outlet Top Flange Approx. 4.5" x 4.5" Top Flange 2.5" Cone Height 5.5" x 5" Bottom Flange 3.5" x 3.5" Center to Center Holes Top Flange 4" x 4.5" Center to Center Holes Bottom Flang...
$399 USD
Holly, MI
Trusted Seller
METAL FABRICATOR Drawer Magnet USED
- Manufacturer: METAL FABRICATOR
66.89 mm Diameter Top Flange Inlet / Outlet 4.5" x 4.5" Center to Center Holes Top Flange 6.5" x 6.5" Top Flange 3.25" Cone Height 1" Cylinder Height 6" x 6" Bottom Flange 4.5" x 4.5" Center to Center Holes...
$399 USD
Holly, MI
Trusted Seller
Used dry material feeder system
- Manufacturer: Acrison
Used dry material feeder system consisting of a super-sak unloading platform mounted above a small stainless steel vibrating hopper equipped with stainless steel knife valve that discharges to small diameter incl...
Charlotte, NC
Trusted Seller
AMI Spring Loaded Industrial Pallet Load Leveler 3500lbs 42x46" Swivel Top
- Manufacturer: AMI
Used, in Good Working Condition. Removed From a Working Environment. Not sure what weight the springs are set at. Swivel top 42x46". 30" high with no load. If this item ships as Flat Rate Freight please see detai...
$926 USD
Millersburg, IN
Trusted Seller
Savage Brothers Material Handling 0710-50 SS
- Manufacturer: Savage
Savage Brothers, power bowl lift and tilt. Rated to a maximum capacity of 250 lbs. Equipped with a self-locking mechanism to hold bowl safely with a maximum lift height of 70".
Carol Stream, IL
Trusted Seller
Graco 233487 Triton AL Pump Package with Wall Mount, Graco Filter, & Regulator
- Manufacturer: Graco
- Machine weight: 18.14368 kilogram
GRACO 233487 Triton Aluminum Pump Package Equipped with Wall Mount, Graco Heavy Duty Filter Housing, & Graco Fluid Pressure Regulator. Triton is an air-operated diaphragm spray package that applies a high quality...
$1,350 USD
Bardstown, KY
Trusted Seller
BUNTING MAGNETICS Drawer Magnet 53169 USED
- Manufacturer: Bunting
4.25" Diameter Inlet / Outlet Top Flange Approx. 7.5" x 7.5" Top Flange 1.5" Cone Height 1.25" Cylinder Height 7.5" x 7.5" Bottom Flange 6" x 6" Center to Center Bottom Flange 3.75" Diameter Inlet / Outlet ...
$399 USD
Holly, MI
Trusted Seller
METAL FABRICATOR Drawer Magnet USED
- Manufacturer: METAL FABRICATOR
50.67 mm X 50.67 mm Inlet / Outlet Square Top Flange 4.5" x 4.5" Top Flange 3" Bottom Cone 4.5" x 4.5" Bottom Flange 50.67 mm x 50.67 mm Inlet / Outlet Square Bottom Flange Expedited shipping services are av...
$399 USD
Holly, MI
Trusted Seller
METAL FABRICATOR Drawer Magnet USED
- Manufacturer: METAL FABRICATOR
75.61 mm Diameter Inlet / Outlet Top Flange Approx. 7" x 7" Top Flange 6" x 6" Center to Center Holes Top Flange Approx. 7" x 7" Bottom Flange 6" x 6" Center to Center Holes Bottom Flange Approx. 75.75 mm Di...
$399 USD
Holly, MI
Allis-Chalmers ACP60 Forklift
- Manufacturer: Allis-Chalmers
- Model: ACP60
Good condition Allis-Chalmers ACP60 Forklifts. Located in USA and other countries. Click request price for more information.
USA