HC-ZH20 Static Load Tester
This product is suitable for compressive static load tests of pile foundations, foundations, rock foundations and other foundations; static pull-out load tests of anchor piles and anchor rods, horizontal static l...
Shaoxing, China
SJY-500/800B/1000 Penetration Strength Tester
SJY-500 penetration aerated concrete strength tester is a product specially used to test the compressive strength of autoclaved aerated concrete. It uses a lever-type force method to penetrate the test nail into ...
Shaoxing, China
HT-225K/KC / 225J/JC Digital Rebound Tester
Nondestructive testing of the compressive strength of concrete structures such as buildings, bridges, and tunnels. Laser detection module, non-contact, frictionless, long service life, higher accuracy (only suppo...
Shaoxing, China
HC-CS202 Crack Depth Tester
HC-CS202 crack depth tester adopts ultrasonic principle and is suitable for crack depth detection of concrete, non-metallic surface, etc. Automatically judge the first wave sound time and amplitude, no manual jud...
Shaoxing, China
HC-MG01 Wireless Anchor Tester
HC-MG01 wireless anchor tester is mainly used for the pull-out force detection and displacement measurement of anchor bodies such as anchors, steel bars, expansion bolts, etc. It is an essential instrument for an...
Shaoxing, China
HC-GY91 Multi-Channel Steel Bar Scanner
It is mainly used to detect the construction quality of reinforced concrete structures. It can detect the thickness of the steel bar protective layer, the position of the steel bars, the spacing, direction and di...
Shaoxing, China
HC-U96S Multifunctional Ultrasonic Low Strain Pile Tester
Acoustic wave transmission method for pile integrity detection Low strain method for pile integrity detection Underground continuous wall integrity detection Concrete ultrasonic rebound comprehensive method for c...
Shaoxing, China
HC-U92 Multifunctional Concrete Ultrasonic Detector
Use the sound wave transmission method and ultrasonic method to detect the integrity of pile foundations, concrete strength, internal defects, crack width and depth in the fields of construction, transportation, ...
Shaoxing, China
HC-TC30 Mortar Strength Tester
HC-TC30 mortar strength pusher consists of a test fixture with a small hydraulic cylinder and a micro manual pump. It is mainly used to estimate the masonry mortar strength in walls with 240mm thick sintered ordi...
Shaoxing, China
HC-D10/D10X Electric Bond Strength Tester
HC-D10X electric bond strength tester is suitable for testing the pull-out force of rivets used to fix thermal insulation materials in construction projects, the bond strength of wall thermal insulation materials...
Shaoxing, China
HC-40 Multifunctional Strength Tester
It is suitable for on-site testing of concrete strength (C10-C80) in construction projects, bonding strength of exterior wall facing bricks, and other related tensile strength. Concrete strength testing uses the ...
Shaoxing, China
HC Series Intelligent Bond Strength Tester
Suitable for testing the bonding strength of exterior wall facing bricks, exterior wall insulation materials, mosaics, various plates and paints. Stainless steel body, built-in micro hydraulic system; HC-2000A us...
Shaoxing, China
HC-RLT Steel Cage Length Tester
Detect the length of a single section of pipe pile and the total length; Detect the distribution of magnetic induction intensity in the borehole and determine the length of the steel cage according to relevant re...
Shaoxing, China
HC-TH01 Carbonation Depth Meter
HC-TH01 carbonization depth meter can be used with our company's HT-225T series rebound tester, and share the upper computer software for data analysis. This product integrates the company's latest research resul...
Shaoxing, China
HC-GZ3 High Strength Rebound Hammer Calibration Anvil
The average rated rebound value of the high-strength rebound tester on the Benxi steel anvil is [N] = 88 ± 2/83 ± 2
Shaoxing, China
Tip: Enter manufacturer, model or keyword