Used Coating & Laminating

GBC 4500 Laminator

• Manufacturer: GBC

GBC 4500 Laminator Serial #KAG7689 Laminates documents: up to 18” wide | Variable temperature and speed: up to 60” per minute | Pouches: from 1.5 to 10.0 mil and mounting boards up to .01" thick | Warm-up time: ...

Nordson iControl Powder Coating System Control Pneumatic Panel Air Valves

• Manufacturer: Nordson

Used. Removed From a Working Environment. This system is not complete. This includes the main control panel that is MISSING some circuit boards. We do not have the spray nozzle, safety light curtains and other pa...

HMC Hot Metal Coating Mold Duster Graphite 120 Gallon Hopper VFD Feed Auger

• Manufacturer: HMC

Used, in Good Working Condition, Tested. This uses air and 480V electric to unload semi solid metal coating material. Could we used as a graphite powder unloader. Label says it is a mold duster. Came out of a ste...

HMC Hot Metal Coating Mold Duster Graphite 120 Gallon Hopper VFD Feed Auger

• Manufacturer: HMC

Used, in Good Working Condition, Tested. This uses air and 480V electric to unload semi solid metal coating material. Could we used as a graphite powder unloader. Label says it is a mold duster. Came out of a ste...

Black Bros 2-Roll Laminator Fiberglass Sheet Press 9' 2"W Rollers 5Hp 3PH

• Manufacturer: Black Bros

In good working condition, removed from a working environment. Tested. 5Hp 230/460V 3PH Drive motor with Allen Bradley VFD. 110-1/2" roller lengths. 11" Roller dia. 33" feed height. 32-1/2"D x 10' 10" base dimen...

14" MAY COATING TECHNOLOGIES PILOT COATING LINE - PAPER LINERS, FILMS & FOAM - ON HOLD LS

• Manufacturer: MAY COATING TECHNOLOGIES

904364.002 One (1) 14" May Coating Technologies Pilot Coating Line Allen Bradley controls Two unwind stations, 18" diameter, 3" core Web steering Web tension rewinds: .25 - 4 Pli Web tension unwinds: .25 - 7 Pli ...

GBC Titan 110 Laminator

• Manufacturer: GBC

GBC Titan 110 Laminator Serial #SC00920G Maximum Laminating Width 1070mm Dimensions 147 x 127 x 63.5 220 Volts, 16 Amps

Seal Image 410 Laminator

Seal Image 410 Laminator Serial #IT-410-733 Supply shaft Capacity (Core Inner Diameter) I.D. 3"

Powder Coating Wand TG1 48040011

• Manufacturer: T&G

You are buying one (1) used Powder Coating Wand TG1 48040011.

Digital 105 38" Laminator

Digital 105 38" Laminator Serial #D-105-79 Electrical: 220 V/60 Hz/6800 Watts | Unique id: 20200113DNCD-105-79

JKO LT 750 TOP AND BOTTOM LAMINATE TRIMMER

• Manufacturer: JKO

JKO LT 750 TOP AND BOTTOM LAMINATE TRIMMER SN:1345, (220/440/60/3 electrics), S-5097 Standard Specifications: *Additional specifications available upon request*

HMC Hot Metal Coating Mold Duster Graphite 120 Gallon Hopper VFD Feed Auger

• Manufacturer: HMC

Used, in Good Working Condition, Tested. This uses air and electric to unload semi solid metal coating material. Could we used as a galvanized or power coating or graphite. Type powder. No sure what It did or wha...

42" REDEX LAMINATOR MODEL THERMO LAM 3

• Manufacturer: Redex
• Model: THERMO LAM 3

42” Redex laminator. 2-ply thermal lamination system. Age 1999. Model Thermo Lam 3. MAP Systems Model LCP-10, serial # 701022, age 1999. MAP Systems Model LAM-42, serial # 651004, age 1999. 300 feet per minute. W...

GBC Titan 110 Laminator

• Manufacturer: GBC

GBC Titan 110 Laminator Serial #OHG4510 Laminator Speed Up to 3m/min Maximum Laminating Width 1070mm Dimensions 147 x 127 x 63.5 220 Volts, 16 Amps