Used Drilling Rigs

UDR 1500 RANGE III DRILL RIG #7776T

75’ mast, 90,000# hookload capacity, Reineer 62 top drive, 44,000 Rexroth drawworks, mounted on 2004 International 5800I triden axle truck (525 hp), hydraulics refurbished at a cost of $175,000 Price: $145,000 TR...

1986 REICHDRILL 650 REVERSE CIRCULATION DRILL RIG #7927T

Manufactured 1986, 840/350 air compressor, sliding angle mast, currently set up for conventional drilling but can be set up for reverse circulation, very clean, 800’ of 4-1/2” x 20’ Matrix drill pipe Price: $375,...

ACKER RENEGADE AUGER DRILL RIG #2982T

Manufactured 2017, Deutz Engine, Hydraulic engine tilt, 20 000 lb pullback and pulldown, 8 speed drill head, 8000 ft lb torque 1st gear low , 1000 RPM in 4th gear high, hydraulic head slide, Dual sliding base, 12...

1984 DRILLER’S FRIEND DRILL RIG PACKAGE #1103T

Manufactured 1984, complete rig 4000’ depth, 56’ x 240,000# derrick, double drum drawworks, Detroit 8V92 engine, Allison 750 transmission, double 15 hydromatic brakes, Hacker 15” rotary table, Oilwell 214P mud pu...

1980 DRILTECH D40K DRILL RIG #9953Ta

• Manufacturer: Driltech

Manufactured 1980 Price: $80,000 DRILTECH D40K DRILL RIG AND WATER TRUCK PACKAGE

SOILMEC SM-4 DRILL RIG

• Manufacturer: Soilmec
• Model: SM-4

2016 SOILMEC SM-4 MICROPILE Power Pack Included Low Hours Weight 5.8T Engine: 115KW Max Hoist: 70 kN Max Torque: 1300 DaNm

1978 PORTADRILL TKT DRILL RIG #4881Ta

• Manufacturer: Portadrill

Manufactured 1978, on board LeRoi air compressor (works but worn), 18” rotary table, mast extension, mounted on 1981 Kenworth 500C truck, rig is in fair condition, has been parked since Fall 2023, currently rebui...

2016 GEFCO 30K DRILL RIG #4422T

• Manufacturer: Gefco

Manufactured 2016, Sullair 1000/350 air compressor, Moynco 3CL8 onboard hydraulic pump, 40,000 lb pullback, mounted on Peterbilt tandem axle truck, 6720 total engine hours, 4360 total compressor hours, approx 27,...

HUGHES WILLIAMS LDH DRILL RIG #2944T

• Manufacturer: Hughes

80’ digging depth, 4” inner kelly, 6” outer kelly, John Deere 990 tracks (12” W x 16’L x 36” shoes), Cummins 5.9 engine, 30 ton Pullmaster main winch, 12000 service winch, air clutch, Joy sticks for travel and tu...

CME 75 AUGER DRILL RIG #10187T

Cummins diesel engine, auto hammer, breakout wrench, mounted on International 4900 DT466E truck with Detroit diesel engine, no water pump but hydraulically plumbed for water pump Price: $62,500

1995 CME 550X DRILL RIG #10923T

Manufactured 1995, Cummins 3.8L diesel engine, two lifting winches, water tank and pump, recently rebuilt (rear) drill transmission and overload clutch, 75’ hollow stem auger flights and 70’ drill rod, miscellane...

REVERSE CIRCULATION TOP DRIVE DRILL RIG PACKAGE #3475T

Mounted on Ardco 6 x 6 buggy, Cat 3406 engine, 13 speed transmission (engine and transmission recently gone through), RTO 9513 gear box into sub drive box, Ramsey Model 800 winch, Sullair 750/350 air compressor, ...

1998 CME 550X DRILL RIG #1283Tb

Manufactured 1998, Drill completely rebuilt 2025 with everything new on the drill side brand new, 1 wireline winch, 1 main winch, 1 worker winch, auto hammer, Cummins diesel engine, 3L8 Moyno pump, CME breakout t...

2008 SCHRAMM T685WS-C #DRILL RIG 10786T

• Manufacturer: Schramm

Manufactured 2008, Reverse circulation, sliding angle drilling rig, Dual stage 1150/500 Sullair compressor with clutch (900/500 and 1,150/350), 93,000# pullback, tophead has 106,000 in-lbs torque, Cummins QSK19-C...

2004 INGERSOLL-RAND DM45LPXL900

• Manufacturer: Ingersoll Rand
• Model: DM-45
• Hours: 29,234 h
• Drive types: Diesel

2004 INGERSOLL-RAND DM45LP-XL900 LOW PRESSURE DRILL SERIAL NUMBER 7864 CAB WITH A/C, CUMMINS ENGINE 4 STEEL CAROUSEL DUST COLLECTOR ANGLE DRILLING AS OF NOV 1, 2022 WE HAVE REPLACED THE 2 SPOROCKS, 4 BOTTOM ROLLE...

Ingersoll Rand ECM-720 Drilling Rig

• Manufacturer: Ingersoll Rand
• Model: ECM-720

Good condition Ingersoll Rand ECM-720 Drilling Rigs manufactured in 2003. Located in USA and other countries. Click request price for more information.