Used Drilling Rigs

MAYHEW DSM 1000 DRILL RIG #5483T

• Manufacturer: MAYHEW

Completely refurbished 2010, derrick needs a little work, Mission Magnum Sandmaster 4 x 3 x 13 mud rotary pump, mounted on 1998 Mack CH613, completely with 2-3/8 pipe and various bits Price: $167,500

1981 MAYHEW 1000 DRILL RIG #4022T

Manufactured 1981, Leroi SDS 75S1 air compressor, mounted on Paystar 5000 truck, pipe, tools, last used 2021 Price: $47,500 MAYHEW 1000

1968 CYCLONE TH40 DRILLING RIG #13956T

Manufactured 1968, mounted on 1968 Chevy truck, 270’ of 3” thread end rod 2-3/8” drill stem, mud pan, drive hammer. 1981 International 1500 gallon water truck Package Price: $65,000 ATLAS COPCO/INGERSOLL RAND T4

INGERSOLL RAND TH60 DRILL RIG #13113T

• Manufacturer: Ingersoll Rand
• Model: TH-60

Completely refurbished 2007, 2 deck engines: Cat 3306B direct drive to 750/250 IR air compressor, John Deere 6068T (175 hp) running hydraulics (Rex Roth aned C.I.H. pressure compensated), High pressure triplex wa...

1972 GARDNER DENVER 1000 DRILL RIG #9790Ta

• Manufacturer: Gardner Denver

Manufactured 1972, 550/150 air compressor, 4 x 3 Mission centrifugal mud pump, mounted on tandem axle Ford truck, 700’ of 3” Bottleneck x 20’ (2-3/8 IF) drill pipe, 6” collar, (2) 7-7/8” tricone bits, starter sub...

2011 SERVICE KING 1000 DRILL RIG #3975T

• Manufacturer: Service King

Built 2011, 1000 hp Service King 1000 drawworks p/b (2) Detroit 60 Series engines 455 hp each, Service King 117’ x 450,000# SHL mast, 15’ adjustable substructure 16’KB (12'2" height from bottom of rotary beams to...

MAIT MR5050 DRILL RIG #10084Tb

• Manufacturer: Mait

48” diameter x 50’ depth, 50,000 ft/lbs torque Price: $325,000

1987 FAILING F10 DRILL RIG #10684T

• Manufacturer: Failing
• Model: F10

Auger drilling, high speed rock coring, conventional mud/air rotary drilling. Rig manufactured 1987, mounted on 2015 Mack Truck CXU613 with 13L diesel engine, approx 540,000 miles, Eaton 10 speed manual transmiss...

1986 MOBILE B-80 DRILL RIG #3387T

Manufactured 1986, rig has a floating spindle installed for coring, et up for augering and large diameter core drilling, 22’ stroke, in/out slide base, breakout wrench, aux and main winches, no Moyno pump, no wat...

1983 SPEEDSTAR SS1000 DRILL RIG #3669T

Manufactured 1983, Gardner Denver 5 x 6 mud pump, retractable table, mounted on International 4900 tandem axle truck with 251,000 miles, 4 jacks Price: $70,000 NATIONAL DRAWWORKS SINGLE DRUM ROTARY DRILL RIG

1980 FAILING CF15 DRILL RIG #3525Ta

• Model: CF15
• Horsepower: 170 hp
• Drilling depth: 450 m

Manufactured 1980, 5-1/2 x 8” Gardner Denver duplex pump, 23’ kelly, chain pulldown, air clutches, breakout wrench, 5-5/8” retractable rotary table, derrick 34’ from table to crown, mounted on 2005 Kenworth T300,...

SHOP BUILT MUD ROTARY DRILLING RIG #7785T

• Manufacturer: Shopbuilt

Built approx 2007, 150’ – 200’ depth capacity, rig has heavy duty railroad winch cable for up and down drilling operations or for pulling pumps, 3” centrifugal mud pump, IR 40 cfm developmental air compressor, pu...

1997 CME LC60 DRILL RIG #10232T

Manufactured 1997, fully refurbished, ready to drill, , brand new rotary head 80k, almost 100% hydraulic hoses has been changed, new winch motor, one new track, new turbo and lots of new pieces, new radio control...

2015 TEXOMA 800-95 DRILL RIG #921T

• Manufacturer: Texoma
• Model: 800
• Horsepower: 140 hp
• Transmission type: PowerShift

Manufactured 2015, mounted on 2016 Freightliner tri-drive, 16,020# front axle, 57,160# rear axle, 73,180 GVW Price: $450,000 TEXOMA 800 DRILL RIG (3961Tc) 85’ depth, manufactured 1998, Cummins engine, 4” dry trip...

BAYSHORE LODRILL LM60 DRILL RIG #3359Ta

• Manufacturer: Bay Shore

Mounted on 1995 Caterpillar 315L, 60’ drill depth, 6 cylinder diesel engine Price: $165,000

Atlas-Copco ROC D7-11 Drilling Rig

• Manufacturer: Atlas-Copco
• Model: ROC D7-11

Good condition Atlas-Copco ROC D7-11 Drilling Rigs manufactured in 2010. Located in USA and other countries. Click request price for more information.