
2008 SCHRAMM T685WS-C #DRILL RIG 10786T
- Manufacturer: Schramm
Manufactured 2008, Reverse circulation, sliding angle drilling rig, Dual stage 1150/500 Sullair compressor with clutch (900/500 and 1,150/350), 93,000# pullback, tophead has 106,000 in-lbs torque, Cummins QSK19-C...

2004 INGERSOLL-RAND DM45LPXL900
- Manufacturer: Ingersoll Rand
- Model: DM-45
- Hours: 29,234 h
- Drive types: Diesel
2004 INGERSOLL-RAND DM45LP-XL900 LOW PRESSURE DRILL SERIAL NUMBER 7864 CAB WITH A/C, CUMMINS ENGINE 4 STEEL CAROUSEL DUST COLLECTOR ANGLE DRILLING AS OF NOV 1, 2022 WE HAVE REPLACED THE 2 SPOROCKS, 4 BOTTOM ROLLE...

1978 PORTADRILL TKT DRILL RIG #4881Ta
- Manufacturer: Portadrill
Manufactured 1978, on board LeRoi air compressor (works but worn), 18” rotary table, mast extension, mounted on 1981 Kenworth 500C truck, rig is in fair condition, has been parked since Fall 2023, currently rebui...

2016 GEFCO 30K DRILL RIG #4422T
- Manufacturer: Gefco
Manufactured 2016, Sullair 1000/350 air compressor, Moynco 3CL8 onboard hydraulic pump, 40,000 lb pullback, mounted on Peterbilt tandem axle truck, 6720 total engine hours, 4360 total compressor hours, approx 27,...
$815,000 USDOceanside, NYCYCLONE 35 CABLE TOOL DRILL RIG #3275T
Ford diesel engine on deck, 2 line machine, mounted on Ford L8000 truck with diesel engine, hydraulic jacks, some tools, last drilled 2024 Price: $27,500 CYCLONE 35 COMBINATION CABLE/AUGER RIG

CME 75 AUGER DRILL RIG #10187T
Cummins diesel engine, auto hammer, breakout wrench, mounted on International 4900 DT466E truck with Detroit diesel engine, no water pump but hydraulically plumbed for water pump Price: $62,500

CME 55 AUGER DRILL RIG #12922T
Manufactured 1968, 3L8 Moyno mud pump, hydraulic rod holder and breakout wrench, CME auto hammer, 2 winches, multi-fuel carrier engine/diesel deck engine, mounted on 1971 American General M35A2 2.5 ton all wheel ...

REVERSE CIRCULATION TOP DRIVE DRILL RIG PACKAGE #3475T
Mounted on Ardco 6 x 6 buggy, Cat 3406 engine, 13 speed transmission (engine and transmission recently gone through), RTO 9513 gear box into sub drive box, Ramsey Model 800 winch, Sullair 750/350 air compressor, ...

IDECO DRILLING RIG #8194T
- Manufacturer: Ideco
IDECO 525 drawworks powered by (2) Cat 3408 engines with torque converters, 132’ x 500,000# derrick with 5 sheave 250 ton 1-1/8” groove shorty hook, 10’ box on box substructure with 4’ poney, 18-1/2” rotary, (2) ...

1974 SPEEDSTAR SS-15THH DRILL RIG #5497T
Manufactured 1974, Leroi 600 cfm air compressor, no mud pump (but plumbed for one), mounted on 4 axle Crane Carrier, 350 Cummins diesel engine, PTO, Fuller transmission, 3 hydraulic leveling jacks, no rod box, no...

1999 Bauer Drill Rig Package #8585TB
-Bauer BG36, year 1999, on BC100 carrier -Bauer BG30, year 1999, on BS90 carrier Both have not worked in several years and need engine, electrical, hydraulic repairs, good for parts Location Asia Package price fo...

2010 #EDM 2000 SLIDING ANGLE MAST DRILL RIG 7472Tc
Year 2010, mounted on 2019 International 7500 8x4 truck, Set up for exploration drilling (5-150 rpm tophead in low gear) AND core drilling applications (150-1,500 rpm tophead in high gear), Max tophead torque 9,0...
$685,000 USDOceanside, NYSPEEDSTAR SS40 REVERSE CIRCULATION DRILL RIG #2214T
Rebuilt, mounted on tri axle trailer, 18” Failing 150T rotary table completely rebuilt, Mercedes engine, Allison transmission, set up for reverse circulation Price: $975,000
$975,000 USDOceanside, NY1996 CME 75 AUGER DRILL RIG #10416Ta
Manufactured 1996, Cummins 6 cylinder diesel deck engine, auto SPT, Moyno water pump, 2 winches (wireline), 150 gal water tank, mounted on 2005 International 7800 4 x 4 truck with diesel engine, manual transmissi...

155 DRILL RIG #9723T
Manufactured 2007, 4x3 Mission Magnum mud pump, no air, uses 15’ drill pipe, slide out tophead that makes capable of setting 20’ casing with 4’ clearance from the ground, mounted on Ford 650 single axle truck wit...

Ingersoll Rand ECM-350 Drilling Rig
- Manufacturer: Ingersoll Rand
- Model: ECM-350
Good condition Ingersoll Rand ECM-350 Drilling Rigs manufactured in 1988. Located in USA and other countries. Click request price for more information.
USA

