Used Evaporators

Wiped/Thin Film Evaporator 97.5 kg/h (215 lb/h) Stainless Steel - IPP# 235999

• Manufacturer: Luwa SMS

wiped film evaporator. Jacket rated for Rated for 150 psi at 381 degrees F. Stainless steel rotor belt driven by a pully and motor. Diameter of body section jacket 19.2". Shell wall thickness 0.393 thick, Jacket ...

Rising/Falling Film Evaporator 14,000 kg/h (30,850 lb/h) Stainless Steel Austenitic - IPP# 212762

• Manufacturer: Wiegand

single effect falling film evaporator system with mechanical vapour compression product feed 70,000 kg/hr @ 70 deg C and 12 Gew. -% NaOh, product outlet 56,000 kg/hr @ 73 deg C and 15 Gew.-% NaOH, steam consumpti...

Stainless Steel 316L Luwa SMS HM-1200 Wiped/Thin Film Evaporator - IPP# 706885

• Manufacturer: Luwa

jacketed thin ‘filmtruder’ evaporator system, internal pressure -1/3.2 bar @ 200 degrees C (3900 liter), top jacket 7 bar @ 200 degrees C (11 liter), straight side jackets 7 bar @ 200 degrees C (3 x 65 liter), bo...

Stainless Steel 316L Carl Canzler 900/6,0-K10 Wiped Film Evaporator - IPP# 211633

• Manufacturer: CARL GANZLER

Short Path wiped film evaporator system with internal condensor Includes 2.9m² SS cold trap Rated 2000 liter 95 liter in the jacket Top mounted rotor drive with a 3.7 kw, 50 Hz gear motor with mechanical seal on ...

Stainless Steel 316L Carl Canzler 900/6,5-K10 Wiped Film Evaporator - IPP# 211741

• Manufacturer: CARL GANZLER

Short Path wiped film evaporator system with internal condensor includes SS seperator tank. Rated 2000 liter 95 liter in the jacket. Top mounted rotor drive with a 3.7 kw, 50 Hz gear motor with mechanical seal on...

Rising/Falling Film Evaporator 9,400 kg/h (20,700 lb/h) Stainless Steel 316 - IPP# 706886

• Manufacturer: Kleiser Gmbh

single effect falling film evaporator pressure internal -1/6 bar @ 200 degrees C (1291 liter), jacket -1/6 bar @ 200 degrees C (1020 liter) 9.4 m3/hour evaporation rate single pass tubeside, 316Ti (1.4571) stainl...

LCI (Luwa) Wiped/Thin Film Evaporator Pilot Skid 5.1 sq. ft. - IPP# 247796

• Manufacturer: Luwa

Stainless Steel 304 Clad Hitachi Adjust-O-Film Wiped/Thin Film Evaporator - IPP# 247169

• Manufacturer: Hitachi

Wiped/Thin Film Evaporator 626 kg/h (1,400 lb/h) Stainless Steel 304 - IPP# 31727

• Manufacturer: Buflovak/Blaw Knox

304 ELC SS 40% clad on Carbon steel (for product contact), thin film evaporator system Mfd by Buflovak 165 psi @ 400 deg F jkt. NB stamped 5931. Rotor was under driven by 20 HP, 3/60/220/440 volt mtr w/UL label, ...

Wiped/Thin Film Evaporator 195 kg/h (430 lb/h) Stainless Steel 316 - IPP# 87894

• Manufacturer: Luwa SMS

(3) evaporator sections Separator section 48" dia. Int rated full vac, jkt rated 150 psi @ 393 deg F. Cone btm not jkt. 4-blade rotor. Belt driven by 15 HP, 3/60/220/440 volt, 1140 rpm motor, UL label. Rotor 380 ...

Wiped/Thin Film Evaporator 626 kg/h (1,400 lb/h) Stainless Steel 304 - IPP# 31726

• Manufacturer: Buflovak/Blaw Knox

304 ELC SS 40% clad on Carbon steel (for product contact), thin film evaporator system 165 psi @ 400 deg F jkt NB stamped 5932. Rotor was under driven by 20 HP, 3/60/220/440 volt mtr w/UL label, 480 rpm rotor spe...

Wiped/Thin Film Evaporator 11.3 kg/h (25 lb/h) Stainless Steel 316 - IPP# 102461

• Manufacturer: Luwa SMS

wiped film evaporator/filmtruder body only. Jkt rated 16 psi. 6" dia x 5'6" long.

Rising/Falling Film Evaporator 6,700 kg/h (14,750 lb/h) Stainless Steel Austenitic - IPP# 706887

• Manufacturer: Kleiser Gmbh

single effect vertical falling film evaporator jacket -1/6 bar @ 200 degrees C (1100 liter), 6.7 m3/hour evaporation rate Fabrik #3981 single pass tubeside, 316Ti (1.4571) stainless steel tubesheets, 800mm diamet...

Rising/Falling Film Evaporator 7,250 kg/h (16,000 lb/h) Stainless Steel 316 - IPP# 246894

• Manufacturer: Swenson

With Condenser and Schutte & Koerting 10" thermo compressor. 246877 1450 Sq.Ft. 316 SS clad on CS 65 psi at 200 degrees F.

Rising/Falling Film Evaporator 2,250 kg/h (5,000 lb/h) Stainless Steel 304 - IPP# 216077

• Manufacturer: Paget Equipment

72" OD x 111 straight side 2000 gallon capacity "U" tube heater Size 35-42 Channel head is CS Vessel includes Koch style 931 6" thick denmister. Bundle is 36" x 5', Channel head is CS. Channel head is CS.