Used Filter Presses

Tower Filter 32 m² (344.4 ft²) Plastic - IPP# 204422

• Manufacturer: Larox/Hoesch

polypropylene tower filter press Manufactured by Larox/Hoesch Order no. #610933/34 20 polypropylen and rubber membrane plates 1/1,25 m³ cake capacity max cake thickness 35 mm CS and FRP coated frame., Rubber line...

Stainless Steel 316 Cartridge And Candle Filter - IPP# 230511

• Manufacturer: Pall Portsmouth

Removable top with swing bolts with hand wheels. Removable flat bottom with swing bolts and hand wheels. (2) inlet and outlet.

2015 Evoqua Water Technologies 1500N32-76-150SYLC

• Manufacturer: Evoqua Water Technologies

Evoqua Water Technologies (now part of Xylem) 1500 mm J-Press. Model #1500N32-76-150SYLC. Filter area 3075 sq ft. 76 plates. Cake thickness 32 mm, Capacity 150 cu ft. Low Operating Hours. Less than 60 days in op...

Hastelloy - C276 Pall Cartridge And Candle Filter - IPP# 207029

• Manufacturer: Pall

Trinity filter housing Trin-Cor serial #60795, Part # 4HD 4886-1778 Pressure drop 4 psi @ 500 GPM Inlet & outlet connections are 2.5 " weld neck flanges. Filter has four 1" weld neck flanges for draining and vent...

Hastelloy - C276 Pall Cartridge And Candle Filter - IPP# 207030

• Manufacturer: Pall

Trinity filter housing Trin-Cor serial #60702, Part # 4HD 4886-1778. Pressure drop 4 psi @ 500 GPM Inlet & outlet connections are 2.5 " weld neck flanges. Filter has four 1" weld neck flanges for draining and ven...

Cartridge And Candle Filter Stainless Steel 316 - IPP# 230507

• Manufacturer: Cuno

Rated FV/100 PSIG @ -20 to 300 dgrees F Certified by Stainless Fluid Products

Stainless Steel Austenitic Wollner & Platz Nutsche Filter - IPP# 217623

• Manufacturer: Wollner & Platz

Internal 185 litre Jacket 48 litre stainless steel jacket on straight side and bottom dish filter plate with manual raise/lower mechanism TUV certified

Stainless Steel 316 JENS OLSEN Nutsche Filter - IPP# 706724

• Manufacturer: JENS OLSEN

2376 liter stainless steel agitated, jacketed tumbling pressure Nutsche filter internal pressure -1/2 bar @ 50/134 degrees C, jacket -1/2 bar @ 50/134 degrees C (150 liter) nged bolt dished bottom with hydraulic ...

Cartridge And Candle Filter 0.7 m² (7.5 ft²) Stainless Steel Austenitic - IPP# 705877

• Manufacturer: Ultra filter

Additional Info:

Tower Filter 32 m² (344.4 ft²) Plastic - IPP# 204426

• Manufacturer: Larox/Hoesch

Manufactured by Larox/Hoesch Order # 610933/34 20 polypropylen and rubber membrane plates, 1/1,25 m³ cake capacity max cake thickness 35 mm CS and FRP coated frame rubber lines filter elements pipes Trovidur HT, ...

Pressure Leaf Filter Alloy Fab Stainless Steel 316 - IPP# 202194

• Manufacturer: Alloy

500 Gallon Manufactured by Alloy Fab for Dartco Shell is .250" thick Top head is .312" thick Cone is .312/.437" thick jacket is .109" thick 6.5 turns half pipe on top head 18 turns half pipe on straight side 5 tu...

Cartridge And Candle Filter 6 m² (64.6 ft²) Rubberlined - IPP# 200492

• Manufacturer: Dr. Mueller

Fundabac filter Filter shell 5 mm thick 369mm conical bottom 14 filter elements 82mm diameter x 1650 mm long made of polypropylene

Cartridge And Candle Filter 16.5 m² (178 ft²) Hastelloy - - IPP# 209487

Filterite Filter Horizontal Type 267MSQH3-Hast C-3FD-375 Tank is 30" diameter x 30" straight side one welded head one bolted dished head Takes thirty 30" or 40" cartridge filters.

Stainless Steel 304 SCHORCH RA Funda Pressure Leaf Filter - IPP# 207194

• Manufacturer: Schorch

Stawag Funda pressure leaf filter 55°C to 65°C internal 1.5 m³ volume Voltage: 3~380A/660V Current: 11.4A/6.6A Number of plates: 18

Stainless Steel 316 Chemap AG (Swiss) Pressure Leaf Filter - IPP# 800276

• Manufacturer: Chemap AG (Swiss)

design pressure 5.69 bar @ -29/+60 deg C Shaft seal: Packed gland built to ASME V111 div 1