Used Forging

1 tons Hammer Forging Pneumatic MPM3150B Huta

• Manufacturer: Huta Zygmunt, Polish

Capacity : 1 ton, Energy of blow : 3600 kg.m, Weight of falling ram : 1250 Kg, Max. Tup stroke : 800 mm, Guideway spacing : 550 mm, Length of die steam in the tup : 500 mm, Length of die steam in the cushio...

3 tons Hammer Forging Open Die Pneumatic Romanian

• Manufacturer: Romanian

Capacity : 3 tons, Ram weight : 3150 kg, Total height above the foundation : 6185 mm, Height above the ground : 5975 mm, Width of the hammer : 2500 mm, Length of the hammer : 4935 mm, Table of the gabot : 4...

2 tons Hammer Forging Open Die Pneumatic Romanian

• Manufacturer: Romanian

Capacity : 2 tons, Ram weight : 2000 kg, Max. ram working : 1200 mm, Height of the working area : 530 mm, Distance between three uprights : 2300 mm, The distance from the level the lower anvil from the groun...

2.5 tons Hammer Forging Pneumatic Huta MPM2000A

• Manufacturer: Huta Zygmunt, Polish

Forging Hammer CM2500 made by Progresul Braila - Romania Capacity : 2.5 tons, Weight of the ram : 2480 kg, Ram stroke : 950 mm, No. of stroke per min : 90, Shut height till ram : 650 mm, Shut height till ta...

1 ton Hammer Forging Pneumatic Huta MPM3150C

• Manufacturer: Huta Zygmunt, Polish

U-Frame Capacity : 1 tons, Energy of blow : 3600 kg.m, Weight of falling ram : 1250 Kg, Max. Tup stroke : 800 mm, Guideway spacing : 550 mm, Length of die steam in the tup : 500 mm, Length of die steam in ...

0.75 tons Hammer Forging Pneumatic Huta MPM1600B

• Manufacturer: Huta Zygmunt, Polish

Capacity : 0.75 tons. Energy of blow : 18.4 KJ, Weight of falling part (without die) : 690 kg, Max weight of upper die : 200 kg, Weight of anvil block without die holder : 12.5 tons, Weight of hammer with an...

1 ton Hammer Forging Pneumatic Huta Zygmunt, Polish MPM1000

• Manufacturer: Huta Zygmunt, Polish

Capacity : 1 ton, Falling part weight : 1230 kg, Blow energy : 3500 kgm, Stroke per min. : 110, Max. ram stroke : 900 mm, Approx die size : 460 x 700 mm, Approx. weight of anvil in : 22.5 ton, Approx. tota...

1 ton Hammer Forging Open Die Pneumatic Stanko M418

• Manufacturer: Stanko
• Model: M418

Capacity : 1 ton, Blow energy : 2700 mkg (27 kJ), Ram stroke : 950 mm, Number of strokes per minute : 95 1/min, Overhang : 800 mm, Ram weight : 1000 kg, Anvil weight : 11.8 tons, Driving power : 45 kW, 380...

2003 Matrix 150 Ton Matrix 150 Ton

• Manufacturer: Matrix

Matrix 150 Ton 2003 The press is Hydraulic with 12 axes controlled in force, position and speed.

IMV PRESS 500 ton

• Manufacturer: IMV

Ton: 500 | Table - width (mm): 600 | Number of strokes / min: 45 | Subtype (dm / cdc): DM | Ce mark: No | Slide - stroke (mm): 300 | Drive system (eccentric / link motion / knucle joint / hydraulic / screw fly):...

PSP Pohony slat brake

normal 0 21 false.false false.false False de X-NONE X-NONE Lamella brake, brake psp Pohony Elb 6.3 24V CSN 02 6573 (? Sn 02 6573) 4 coupling discs used, priced!