Used Machine Tools in Germany

Cleco pneumatic angle grooving machine (34 series) 34RAA37AX3 480 rpm 18-37 Nm

• Manufacturer: Cleco

Cleco Cleco 34RAA37AX3 - Right-angle screwdriver with Clecomatic coupling (34 series) Special features: Clecomatic Clutch: Automatic cut-off clutch for precise torque. Reversing function: Forward and reverse oper...

Cross hole drilling machine DIY

Order no.: 174600, horizontal and vertical drilling unit

Table drilling machine FLOTT B10/1

• Manufacturer: Flott

max. drill bit Ø: 10 mm, T-slot table: approx. 15x15x cm, older

1 core drilling machine Clipper Norton CDM203

• Manufacturer: Norton

Atlas Copco B315 H0-6 pneumatic die grinder, straight grinder, 600 rpm, 4110 0736

• Manufacturer: Atlas-Copco

Nameplate not identifiable. H1R7A5K18-7-PD 3.7 Age rating: No age restrictions | Country of manufacture: Sweden | Content: 1 piece | Mass: 3700 g | Item condition: Second hand

PAGUS tool holders

• Manufacturer: Pagus

Tool holders, 23 pieces PAGUS SK50 7x holder for screw-in cutter internal thread: M16 x 2.0 7x milling cutter mandrel, partially incomplete 4x surface chucks (WELDON): diameter: Ã 16, 20, 25, 31 mm 1x collet chuc...

ELU cross-cut saw

• Manufacturer: Elu

Machine type: Mitre saw Brand: Elu Design: Heavy industrial version, full metal construction Housing: Solid cast housing (low vibration, high stability) Engine / Power Motor type: three-phase motor Volt...

Pneumax 1400.40.150.03.2 Oil brake cylinder Ø 40mm / stroke 150 mm control on both sides

• Manufacturer: PNEUMAX

Ø 40 mm Stroke 150 mm Control on both sides H1R7F7K23_6_RD <3 kg

Tool balancer - Atlas Copco - RIL 2C (5x)

• Manufacturer: Atlas-Copco

Model: Atlas Copco RIL 2C Capacity: 0.4 – 1.0 kg (0.9 – 2.2 lbs) Cable length: 1.5 m Material: Nylon rope Dimensions: approx. 51 × 106 × 238 mm Weight: approx. 0.6 kg (device), shipping weight approx. 757 g Featu...

2012 Achterberg Tool 24 - Start -N 48

• Manufacturer: Achterberg

Tool dispensing system - Warehouse management system Selection through automatic processes Electronic access to definable drawers via warehouse management software -Optimized storage and management of tools Stora...

KENNAMETAL tool holder

• Manufacturer: Kennametal

Tool holder KENNAMETAL TH1533413 /HSK100-A New! Lk no .: 102642147 | Tool: Ø 10 mm | Overhang (a dimension): 162 mm | Recording: HSK - A100 | Dimensions (tool holder): 215 x Ø 100 mm | Dimensions (packaging): 130...

Stand drill BGU nameplate not legible

• Manufacturer: BGU

1 vise, 1 metal container for chips

Schunk adapter plate flange OPS 100 & 101 fastening element 5506269

• Manufacturer: Schunk

This item originates from the liquidation of one of Germany's largest auto parts suppliers. The items were stored in paternosters, so original packaging may be missing and some items may show signs of storage. H1...

WUHAN JZ - 12 Tapping Machine

Demonstration machine! Pneumatically driven tapping machine for M3 - M12 threads with: - stable and flexible working arm. - 6 quick-change chuck with slipper clutch. Documentation in English!! Thread diameter...

HAGEN & GOEBEL HG 10 Tapping Machine

• Manufacturer: Goebel

Tapping machine Thread diameter 3 - 10 mm Speed Tool 120 - 600 rpm Table size 250 x 350 mm Projection 250 mm Operating voltage 380 V Thread length 80 mm Total power requirement 0.55 kW Machine weight approx. 0.3...