Used Machine Tools in Saxony, Germany

AS TECH Bolt tensioning device

• Manufacturer: AS TECH

screw fixture AS TECH HWS Hand lever pump: HDP07001003 9158.22 hydraulic nut: HWS16111131 9158.22.04 158kN 700 bar approx. 2.0 m connection hose in a metal case Used!

RÖHM Lunette

• Manufacturer: Röhm

Lunette, bezel, self-centering bezel ROHM SLZP-52180 4-645-003-04

MMZ336

Steady rest distance shoulder surface of the guideways: 530 mm used, tested !

PAGUS Luenette

• Manufacturer: Pagus

Bezel, bezel, self-centering bezel PAGUS RMB 5 644 599 used !

SILISTRA chip conveyor

• Manufacturer: Silistra

Chip conveyors, hinged apron conveyors Chip conveyors, hinged belt conveyors SILISTRA TCA 280 x 3221 220 / 380 V 3AC Coolant pump: APOLLO 4 KSEY-25-002 02-008-85-017 Q = 1.6 m³/h H = 63.5 m Motor: MEZ 4AP90L-4 1....

HEIDENHAIN length measuring system

length measuring system HEIDENHAIN LS486C ID 329 991-22 approx. 1.5 m connection cable Spare part, etc. for Machining Center HECKERT CWK400 D! Used, checked !

PAULSTRA all-metal damper

• Manufacturer: PAULSTRA

All-metal damper, machine foot, leveling footset, vibration isolator PAULSTRA V1H752-11 Material (all-metal cushioning pad) CrNi steel wire All-metal damper set consists of 4 feet! Used!

WMW AW1000x800x640

• Manufacturer: WMW

clamping surface is roughly machined good used condition, slight traces of use T-slots according to DIN 650: a=28mm; b=49mm; c=21mm; h=50mm distance T-slot : T-slot= 160mm

HELLER chip conveyor

• Manufacturer: Heller

Chip conveyor HELLER type BEA 05 Drive motor: 0,3 kW 9.0 rpm 220 / 380 V 3AC, 50 Hz Coolant pump1: Q: 250 l/min, H: 13 m 1.7 kW 2850 rpm 230 / 400 V 3AC 50 Hz Coolant pump2: Q: 100 l/min, H: 2 m 0.24 kW 2750 rpm ...

J+P pneumatic punch

Pneumatic punch press J+P, JAGOW + PFEIFER GmbH STZ-KO Used, tested!

VAN MARK cooling slot punch

Cooling slit punch, Slit punch, Hand lever punch VAN MARK PRODUCTS CORPORATION TRIM-A-LOUVER used, tested !

WMW AW 330x310

• Manufacturer: WMW

Application: Machine table adjustable clamping angle with 3 T-slots according to DIN 650: a=17; H027; b=32; c=14mm distance 100mm swivelling via tooth guide +90° rotatable 360° Base Ø 350mm with 2x clamping groov...

1999 TOS- TRENCIN FNG

• Manufacturer: TOS

Angular table - machine table- machine clamping table for milling machine TOS such as FNG or FNGJ The frame is swiveable via hand wheel 360° (scale 360°) T-slots according to DIN 650 and 508 a=14mm; h=24mm; b=25m...

Emag VCL 630/800

• Manufacturer: Emag

VERTICAL MULTIFUNCTIONAL HEADSTOCK UNIT FOR VLC 800 MT TURNING MILLING (see last photo for comparison) The headstock unit of the EMAG machines of the VLC series is characterised by short strokes, high rapid trave...

JFA clamping box

• Manufacturer: JOHANN FISCHER ASCHAFFENBURG

Clamping box, clamping cube, clamping angle, box angle JFA, JOHANN FISCHER ASCHAFFENBURG PRECISION TOOLS 1500x250x250mm all slots Ø 41 x 80 mm 4 chambers 355 x 220 x 235 mm Used!