Used Machine Tools in Saxony, Germany

WMW tension drive

• Manufacturer: WMW

Clamping drive, clamping force generator, electric, with fan WMW EDU I80 EL Motor: KMR 71 K 4 E 0.55 kW 1380 rpm 220/380 V 3AC used, checked!

WMW hydraulic cylinder

• Manufacturer: WMW

Hydraulic cylinder, single-acting, spring return WMW Hydraulic Cylinder for UPW 63 Spare part for WMW UPW 63! unused!

WMW tension drive

• Manufacturer: WMW

Clamping drive, clamping force generator, electric WMW EDU I80 M1 Motor: KMRB 71 G 4 F 0.75 kW 1380 rpm 220/380 V 3AC used, checked!

PAGUS bezel

• Manufacturer: Pagus

Bezel, bezel, steady rest, fixed PAGUS used, checked!

WMW tension drive

• Manufacturer: WMW

Clamping drive, clamping force generator, electric WMW EDU I160 Motor: KMR 71 K 2 E 0.75 kW 2800 rpm 220/380 V 3AC Mounting ring: diameter (inside /outside): Ø 137.8 /160 mm, width: 67 mm Internal thread: M140 x ...

WMW tensioning drive

• Manufacturer: WMW

Clamping drive, Clamping force generator, electric WMW EDU I160 Torque adjustable in 8 steps max. 110 Nm 160 rpm 220 /380V 3AC 0.75 kW Splined shaft profile according to TGL 0-5471 For more tensioning drives see ...

POREBA lunette

• Manufacturer: Poreba

Luenette, bezel, buttstock POREBA suitable for Poreba TPK-80! Used!

PAGUS Luenette

• Manufacturer: Pagus

Luenette, bezel, buttstock, fixed PAGUS Used! Inner diameter: Ø 350 mm | Center height: 460 mm | Foot: 540 x 200 mm | Hole distance: 330 mm | Counter pressure plate: 410 x 210 mm | Dimensions: 850 x 220 x 960 mm

GESAU drill

• Manufacturer: Pagus

Stepped drill with internal cooling GETTING (Ø14,5x23,5 /120 ° x25x110) with internal cooling! unused!

PAGUS drill

• Manufacturer: Pagus

Twist drill RECA HSS Twist drills 29.75 - 50 mm MK Shank 29.75 /32/35/37/38/39 /39.75 /42/44/44/46/50mm 14 pieces Used!

JFA clamping box

• Manufacturer: JOHANN FISCHER ASCHAFFENBURG

Clamping box, clamping cube, clamping angle, box angle JFA, JOHANN FISCHER ASCHAFFENBURG PRECISION TOOLS 501 x 250 x 250 mm goodness 2 all slots Ø 31 x 71 mm 2 chambers 225 x 220 x 235 mm Used!

JFA clamping box

• Manufacturer: JOHANN FISCHER ASCHAFFENBURG

Clamping box, clamping cube, clamping angle, box angle JFA, JOHANN FISCHER ASCHAFFENBURG PRECISION TOOLS 1005 x 250 x 250 mm goodness 2 all slots Ø 42 x 80 mm 3 chambers 310 x 220 x 235 mm Used!

WMW AW1000x800x640

• Manufacturer: WMW

clamping surface is roughly machined good used condition, slight traces of use T-slots according to DIN 650: a=28mm; b=49mm; c=21mm; h=50mm distance T-slot : T-slot= 160mm

J+P pneumatic punch

Pneumatic punch press J+P, JAGOW + PFEIFER GmbH STZ-KO Used, tested!

VAN MARK cooling slot punch

Cooling slit punch, Slit punch, Hand lever punch VAN MARK PRODUCTS CORPORATION TRIM-A-LOUVER used, tested !