Used Machine Tools in Saxony, Germany

GÜHRING sealing plug

• Manufacturer: Guhring

Sealing plugs, 6 pieces GÃHRING GM300 4985 63,000 16136705 used, tested!

BO319

Column drilling machine; Column drilling machine WMW BS25 MK3 Motor: Elektromotorenwerke Thurm KR100,2/4-2 380V 3AC 50 Hz 3.7/4.95 A 1.420/2.830 rpm. tested, checked !

1994 WMW 620x160

• Manufacturer: WMW

4 jaws faceplate flange intake/diameter : passage drill hole 160 mm flange diameter 197mm hole circle 235mm jaws are single guided with chuck key The given info are approx. values!

OVERBECK shaft clamping cylinder

• Manufacturer: Overbeck

Shaft clamping cylinder OVERBECK MM0WL000028 New! Diameter: Ø 24 / 30 / 85 / 63 / 25 mm | Length: 73.5 / 65 / 14 / 26.5 / 82 mm | Total length: 261 mm | Dimensions: 261 x 85 x 85 mm

MMZ1335

Rotary feedthrough, inlet DEUBLIN DD RTR FLG 2620-500-252 Like new!

Ku294

Metal bellows coupling, bellows coupling PAGUS Ø 40 / 42 mm 6-corrugated bellows New !

ORTLINGHAUS mechanical clutch

• Manufacturer: ORTLINGHAUS

mechanical clutch ORTLINGHAUS CLUTCHES serial no. 89-15483 with thrust bearing and additional shift ring New !

ORTLINGHAUS mechanical clutch

• Manufacturer: ORTLINGHAUS

mechanical clutch, multi-plate clutch ORTLINGHAUS COUPLINGS Factory no. 39 used, tested! Â

WMW mechanical clutch

• Manufacturer: WMW

mechanical clutch, multi-plate clutch WMW, DRESDEN CLUTCH FACTORY 4 - TGL 42398 used, tested!

POLO filter technology Coolant treatment

• Manufacturer: POLO

Coolant processing, inclined bed filter with magnetic filter POLO filter technology Inclined bed filter: SB-A0.4 Magnetic filters: MAF-0150 50Hz used, tested!

PAGUS V-belt pulley

• Manufacturer: Pagus

V-belt pulley, stepped pulley PAGUS Ã 299 - 351 mm Shaft length: 75 mm, groove width: 10 mm Material: Aluminum (pulley), steel (hub) used, tested !

WMW bearing block

• Manufacturer: WMW

Bearing block, counter bearing for milling spindle WMW Ø 70mm x 150mm Distance between the center of the spindle and the upper edge of the dovetail: 150 mm Dovetail guide: 200 /155 mm, height: 30 mm, width: 135 m...

FLEXTORY torque limiter

• Manufacturer: FLEXTORY

Torque limiter, slip hub, slip clutch, safety clutch FLEXTORY GERMANY FT700 TORQUE LIMITER New !

SKF hydraulic nut

Hydraulic nut SKF HMV 12 New, preserved! Thread: M60 x 2.0 | Stroke: Max. 5 mm | P: max. 80 MPa (800 bar) | Outer diameter: 125 mm | Width: 43 mm | Dimensions: 165 x 125 x 43 mm

PAGUS top slide

• Manufacturer: Pagus

Upper slide PAGUS Normal 0 21 false false false EN X-NONE X-NONE Holder for steel holder system MULTIFIX Size: B used, checked!