Used Machine Tools in Saxony, Germany

1999 TOS- TRENCIN FNG

• Manufacturer: TOS

Angular table - machine table- machine clamping table for milling machine TOS such as FNG or FNGJ The frame is swiveable via hand wheel 360° (scale 360°) T-slots according to DIN 650 and 508 a=14mm; h=24mm; b=25m...

angle table nicht bekannt

• Manufacturer: nicht bekannt

Angle extension table - machine table - machine clamping table with 33 x clamping holes M24 vertical mounting side: W x H: 800 x 450mm with 4 clamping grooves Ø 30 x 75mm

IND-SPHINX® micro drill

• Manufacturer: IND-SPHINX

Micro drill, drill, 9 pieces IND-SPHINX® PRECISION LIMITED D8358 D8358033001200000 Ã3.30x12.00mm New!

IND-SPHINX® micro drill

• Manufacturer: IND-SPHINX

Micro drill, drill, 11 pieces IND-SPHINX® PRECISION LIMITED D8353 D8353031001050000 Ã3.10x10.50mm New!

IND-SPHINX® micro drill

• Manufacturer: Pagus

Micro drill, drill, 14 pieces IND-SPHINX® PRECISION LIMITED Type 2384 (G845) G84500200000600000 Ã2.00x6.00mm Other quantities on request! New!

FEIN tin snips

• Manufacturer: Fein

Sheet metal shears, high-frequency sheet metal shears, high-frequency tool, high-frequency machines FEIN QSz 838 0.24 kW 1850 strokes/min 265 V 3AC 200 Hz approx. 3.5 m connection cable used, tested!

WMW AW 1100x1000x610

• Manufacturer: WMW

Drill cube material made of cast steel. Bohrwürfel Material aus Stahlguss. T-Nuten nach DIN 650m - Spannfläche vertikal: LxT: 1000 x 610mm - Spannfläche horizontal: LxB: 1000 x 1100mm

GESAU drill

• Manufacturer: Pagus

Stepped drill with internal cooling GETTING (Ø14,5x23,5 /120 ° x25x110) with internal cooling! unused!

BOSCH tin snips

• Manufacturer: Bosch

Sheet metal shears, high-frequency sheet metal shears, high-frequency tools, high-frequency machines BOSCH EW/HEP 64A4Z1 0.1 / 0.12 KW 2075 / 2775 strokes/min 200 / 265 V 3AC 150 / 200 Hz approx. 3.5 m connection...

WMW SP 5040x2230x460

• Manufacturer: WMW

Machine table can be used as clamping plate. - material - cast steel - clamping surface 4100 x 2230mm - outlet part lateral (at the side) = W: 2110 x L: 1040mm T-slots according to DIN 650 - b=54.0; c=21.0; h=55....

bolster plate AP 2500x1250x100 (Nr.1-2)

Cast steel The plates are machined before the T-slot with 75mmx60mm(recessed) Table surface 2530mm X 1245 mm Longitudinal slot: Number: 5 Size:a=32, h=53, b=54, c=23mm Center distance 250mm 2 slots Chamfered 8 th...

PAGUS drill

• Manufacturer: Pagus

Twist drill RECA HSS Twist drills 29.75 - 50 mm MK Shank 29.75 /32/35/37/38/39 /39.75 /42/44/44/46/50mm 14 pieces Used!

WMW 3-jaw chuck

• Manufacturer: WMW

3-jaw chuck, three-jaw chuck WMW DH 130 x 3 (DH315x3) TGL 30-2333 Thread: M18 x 1.5, length: 20 mm (left-hand thread) Bore: Ã 30 mm, depth: 55 mm used, tested!

WMW 3-jaw chuck

• Manufacturer: WMW

3-jaw chuck, three-jaw chuck WMW DH 250 x 3 ( DH250x3 ) TGL 30-2333 used, tested!

WMW 3-jaw chuck

• Manufacturer: WMW

3-jaw chucks, three-jaw chucks, power chucks, wedge hook chucks WMW ( DKRDA250x3 ) Jaws individually adjustable by toothing ! with accessories ! used, tested !