Used Materials Testing in Gauteng, South Africa

FULLY AUTOMATED UNCONFINED COMPRESSION SYSTEM (LoadTrac II)

• Manufacturer: Labequip

Advanced Soil Systems ASTM D-2166, AASHTO T-208 Unconfined Compression Testing of Soils ASTM D-1663 Compressive Strength of Moulded Soil-Cement Cylinders Description: The LoadTrac II load frame provides compressi...

Capping Retainers (UTC-0372A)

• Manufacturer: Labequip

Compression and Flexural Testing Machines Product Code: Description: Unbounded Cap is used for determining of compressive strength of hardened concrete cylinders as alternative method to the sulphur hot capping o...

Skid Resistance and Friction Tester (UTA-0830/E)

• Manufacturer: Labequip

Mechanical and Physical Properties Product Code: The Skid Resistance and Friction Tester is used for the measurement of surface friction properties. The apparatus is suitable for both site and laboratory applicat...

Vibrating Compaction Hammer (UTC-0944)

• Manufacturer: Labequip

Hardened Concrete Testing Product Codes: Description: UTC-0944 Vibrating Compaction Hammer with the shank and tamping plate is used for moulding cylindrical test specimens which are used for testing compressive o...

V Funnel (UTC-0540)

• Manufacturer: UTEST

Fresh Concrete Testing Description: The UTC-0540 V Funnel apparatus is used to evaluate the flow time of freshly mixed self-compacting concrete. The test is not suitable when the maximum size of the aggregate exc...

ATOMIC 2000KN CONCRETE CUBE PRESS COMPLETE WITH CONTROLLER (LESC001)

• Manufacturer: Atomic

The Atomic Concrete Cube Press frames for concrete cubes consist of a rigid four column frame. Our frames provide the stability needed for accurate and repeatable test results, over the years of operation. The fr...

J-Ring, Narrow Gap, EN (UTC-0520E)

• Manufacturer: Labequip

Fresh Concrete Testing Product Codes: Description: The J-Ring Test is used for determining the passing ability, the flow spread and the t500Jflow time of self-compacting concrete as the concrete flows through the...

Universal Cutting Machines (UTC-1020)

• Manufacturer: Labequip

Hardened Concrete Testing Product Codes: Description: The UTC Series Universal Cutting Machine has been developed to cut and prepare concrete, rock or natural stone cores or other type test specimens. Special cla...

Digital Bond Strength /Pull-off Tester (UTC-3250)

Protection and Repair of Concrete Structures (NDT) Hardened Concrete Testing Description: 16 kN measurement capacity apparatus is used for determining of bond/pull-off strength of repair mortar, hardened renderin...

Bleeding of Freshly Mixed Concrete (UTC-0720)

• Manufacturer: Labequip

Fresh Concrete Testing Description: UTC-0720 is used for determination of the relative quantity of mixing water that will bleed from a sample of freshly mixed concrete. Due to the continuous development of our pr...

Vebe Consistometer (UTC-0560E)

Fresh Concrete Testing Product Codes: Description: UTC-0560E model consistometer conforms to EN 12350-3 for determining the consistency of fresh concrete by means of the Vebe time. The unit consists of a vibratin...

Flow Cone Apparatus (UTCM-0700E)

• Manufacturer: Labequip

Compression and Flexural Machines Product Code: Description: UTCM-0700E Flow Cone Apparatus is used for determining the flow properties of grouts, mortars, muds and other fluid materials. The Flow Cone Apparatus ...

FULLY-AUTOMATED SHEARTRAC III SYSTEM (ShearTrac III)

• Manufacturer: Labequip

Advanced Soil Systems ASTM D-5321 and D-6243 ASTM 3080/T236 BS 1377 The ShearTrac IIITM system is capable of performing the consolidation and shear- ing phases of a 305 mm x 305 mm (12 x 12 in. by 200mm(8.0 in) h...

RSI-ShearTrac-II (RSI-ShearTrac-II)

Classification Tests Product Code: RSI-ShearTrac-II / 13 kN (3,000 lbs.) frame capacity Description: The Rock Shear Interface (RSI) is a versatile system capable of performing the consolidation and shearing phase...

Lower and Upper Platens (UTC-4511)

• Manufacturer: Labequip

Compression Testing Frames Product Code: Descriptions: The platens enable the testing of a wide variety of cylinder, cube, blocks or similar specimens. Manufactured from high quality steel, which is then hardened...