Used Presses in Germany

Specac P/N 15.011

Specac Manual IR-Press P/N 15.011. KBr-press pellets. 15 T.

Hammerschmidt DP 36

Ernst Hammerschmidt Decimal Press DP 36. W x D x H: 160/55/60 cm. Stamp and support table diameter 15 cm. Max. pressing force: 50 megaponds.

Fruit mill, replacement for BUCHER CM-50 - capacity: 30 t/h 25-0072 25-0072

Catalog No.: 25-0072 Condition: New Quantity: 1 MJ UNI EURO 079-500 11-25 Fruit mill, replacement for BUCHER CM-50 Control cabinet - available at extra cost

BOSCH 0 608 800 619 screw press-in system, screw spindle

• Manufacturer: Bosch

R4A19KTL7_PD(BOR) Age rating: No age restrictions | Content: 1 piece | Item condition: Used, in very good condition

WMW Press

• Manufacturer: WMW

Hydraulic press WMW ZEULENRODA PYE 10x250 Total power requirement: 1.6 kW Machine weight approx: 1,1 t Space requirement approx: 1100 x 650 x 2050 mm Installation height: 500 mm Table size: 400 x 450 mm

PAGUS manual screw press

• Manufacturer: Pagus
• Stroke length: 59 mm

Hand spindle press, spindle press, arbor press, arbor press PAGUS Table diameter: Ø 65 mm, center hole: Ø 20 mm Spindle diameter: Ø 20 mm, tool holder: M12 x 1.75, length: 8 mm used, checked!

PAGUS hand lever press

• Manufacturer: Pagus
• Stroke length: 30 mm

Hand lever press, arbor press, arbor press PAGUS Table diameter: Ø 41 mm, tool holder: Ø 14 mm Plunger diameter: Ø 19 mm, tool holder: Ø 6.0 mm various accessories used, checked!

PAGUS manual spindle press

• Manufacturer: Pagus
• Stroke length: 25 mm

Hand screw press Thrust: probably approx. 6000 kg | Table surface: 390 x 250 mm | Spindle diameter: Ø 40 mm | Ram stroke max: 25 mm | Removal table plunger: 55 mm | Discharge: 100 mm | Dimensions: 440 x 390 x 510...

HSV hand lever press

• Stroke length: 55 mm

Hand lever press, arbor press, arbor press HSV, SCHÄFER MACHINES AND PLANTS Type H3 Table diameter: Ø 70 mm, tool holder: Ø 12 mm with adapter: Ø 20 mm, length: 66 mm, tool holder: Ø 8 mm Plunger diameter: Ø 25 m...

PAGUS manual spindle press

• Manufacturer: Pagus

Manual spindle press used, tested ! Pressure performance: 10 t | Passage between the stands: 450 mm | Installation height: 300 mm | Wheel inner diameter: Ø 1500 mm | Table size: 450 x 400 mm | Space needed: 1.400...

PAGUS manual spindle press

• Manufacturer: Pagus
• Stroke length: 230 mm

Manual screw press, without swing arm PAGUS used, tested !

HSV hand lever press

Hand lever press, mandrel press, rotary mandrel press HSV, SCHÄFER MASCHINEN- UND ANLAGENBAU Type H3 Table diameter: Ø 70 mm, tool holder: Ø 12 mm with adapter: Ø 20 mm, length: 66 mm, tool holder: Ø 8 mm Plunger...

SPM manual spindle press

Manual spindle press, Balance SPM YB-3 Pressure max: 20.000 kg | Width between stands: 380 mm | Hub: 200 mm | Greatest height: 320 mm | Table bore: Ø 76 mm | Balanced meter: Ø 1450 mm | Table: 1120 x 1120 mm | Di...

PAGUS manual screw press

• Manufacturer: Pagus
• Stroke length: 17 mm

Hand screw press PAGUS Used! Stroke stroke max: 17 mm | Projection: 140 mm | Spindle diameter: Ø 11 mm | Spindle internal thread: M6 | Distance table ram: 44 mm | Table surface: Ø 25 mm | Tool holder in the table...

PAGUS manual screw press

• Manufacturer: Pagus
• Stroke length: 50 mm

Hand screw press PAGUS Used! Push stroke max: 50 mm | Projection: 60 mm | Spindle diameter: Ø 20 mm | Spindle internal thread: M12x1.0 with adapter to male thread M5 | Distance table plunger: 95 mm | Table surfac...