Used Processing in Ontario, Canada

Cyclone dust collector vessel

-Cyclone dust collector vessel on stand -Legs 83” tall -Bottom shoot: 6” diameter -Top 2 shoots: 7” diameter -H 122” x W 49” x L 49” -Diameter of Cylinder: 24 1/2" -Height of cylinder: 40" -Height of cone: 38 1/2"

Cone Bottom Carbon Steel Hopper Tank

-Diameter: 9ft -Top opening: 36" x 36" -Two bottom openings: 20" x 20" -Length of legs: 73" or 6.1 ft -Attached to the hopper bottom is a Vibco 250 -Monitor: -Model: KA -Power: 115 V~50/60 Hz -UL listed -Total di...

Blower

-Shipping dimensions: Width 13 1/2" x Height 16 1/2" x Length 17" -HP .25 -V 200 -3 Phase -Hz - 50 / 60 -19 kg

Ametek Rotron Regenerative Blower

• Manufacturer: AMETEK Powervar

-CATEGORY: Blowers/ fans -Model DR979-BE-72-W -Part # 080704 -15 hp, 230/460 volt -3500 rpm -4" ports -1100 scfm -UNUSED -Stock Number: C9304 -Manufacturer: AMETEK -Model: DR979 BE 72 W

Signode Power Strapping Machines

• Manufacturer: Signode

-Maximum cycle speeds vary from 575 to 1500 straps per hour -Strap feed and take -Up speed is 5.3 feet per second -230/460 V -Model number: MCD 700

168 Litres tank with mixer on the bottom

-Tank dimensions:23" heigh x 24" wide. -Over all height 44" -4 legs are 22" tall -Off spout side of bottom is 2.5" diameter -Open top with lid -Cone bottom -37 IMP gall

2 Stage high vac Airtech system

• Manufacturer: Airtech

-Rotary vane vacuum pump with booster -AC500 Booster: Weg motor has 2.2 (3.0) HP, 50HZ, 220/380 Volts, 7,81AMPS, model: 00236ET3WAL90LFF-W22 –L63 Vacuum pump motor: 3HP, 1760RPM, 230/460 Volts –Shipping dimension...

Conveyor

-Stationary -Belt is 11" wide -Pleated dividing belt -Pleats are 11" apart

Strong Hold SS Storage Cabinet

CATEGORY: Miss -60" wide x 30" deep -peak top -82" high at front, 92" high at back -2 sections (24" on left, 36" on right) -(1) sliding SS drawer -(1) lower shelf -(2) 110 volt outlets on back -(4) adjustable hei...

Shaker table Riser

-Shipping dimensions: Height 10" X Width 58 1/2" X Length 69 1/2" -Side shoot diameter: 8" -3 in stock -50" diameter

Fuji Ring Compressor

• Manufacturer: Fuji Electric

-Shipping dimensions: length 12" x width 12" x height "12 -Input/Output: 1.5" -3 phase -2 Poles -50/60 Hz -575 Volts -Output Hp: 1.1 -Max Amps 1.3 -Max H2O: 54.5 -Max CFM 98

Day Ribbon Blender

-Sew-eurodrive motor: 330/575 V, 7.50 HP, 1720 RPM, -5/16 jacket thickness -3/8 shell thickness -Walls have an extension that can be taken off -Shipping dimensions: 48” width x 120” length x 66” height with base ...

Clamp on Mixer with Weg Motor

• Manufacturer: WEG

-0.750" shaft diameter needed -Phase 3 -HP: 0.33 -Volts: 575 -RPM: 1730 -Amps: 0.44

1,900 Litres stainless steel tank with mixer

• Manufacturer: Alfa-Laval

-500 US Gallon -ALFA-LAVAL Jacketed Stainless Steel Mixing Vessel -With Overhead Prop Mixer -80 psi. -Max steam pressure, plate reads 100psi @300F Max W Pressure -20f @100psi Min Des. -Ser. 14972.1 -Made in Canad...

Ball transfer station

-24"x36" -30" high -On stationary legs that can adjust in height