Jet CS-275 Metal Cutting Cold Saw
- Manufacturer: JET
- Model: CS-275
Cutting Capacity: Round at 90°: 3.3" (tube), 1.5" (solid) Round at 45°: 3.3" (tube), 2.5" (solid) Rectangle at 90°: 3.1 x 2.0 (tube), 3.1 x 2.0 (solid) Rectangle at 45°: 2.2 x 2.0 (tube), 2.2 x 2.0 (solid) Square...
Chicago, IL
Baileigh BS-250 or 260 Swivel-Head Horizontal Band Saw
- Manufacturer: Baileigh
- Model: BS-250
BS-250: swivel vise, 110 volts, 1 phase BS-260: swivel head, 220 volts, 1 phase. Cutting Capacity:@90°: 8.75" Round, 10 x 4" Flat Bar@45°: 6.5" Round, 5.5" Square Blade speeds: 66 to 280 fpm variable Blade width:...
Chicago, IL- Trusted Seller
Everett 16-MIT Cut Off Abrasive Metal Saw 16" Blade Exhaust Blower 10Hp 3210 RPM
- Manufacturer: Everett
Used, in Good Working Condition, Tested. This is a working cut off saw. 22" blade. 230/460V 10 Hp main motor. Saw was setup for 45° cuts. Not a miter saw. Good blade with few spares. 29' cord If this item ships a...
$2,500 USDMillersburg, IN 
Model 10-1030 Chop Saw
16 x 8 door opening 5″ clearance from left side of blade 5″ clearance from right side of blade 4″ clearance under blade before chop
Posen, IL- Trusted Seller
Dewalt #9582 - Dewalt 142 Table Saw #9582
- Manufacturer: DeWalt
Dewalt 10″ Table Saw, Model 142 Inventory # 9582 36″ Rip Fence with Extension Miter Gauge Mobile Base
$850 USDBaltimore, MD - Trusted Seller
2008 HYD-MECH H-10A Horizontl Band Saw
- Manufacturer: Hyd-Mech
- Model: H10A
Imperial Metric Hyd-Mech Model H-10A 10" X 10" Horizontal Band Saw Round 10" STANDARD FEATURES: 5 Hp motor with A/C inverter Positive down feed system Stepper driven shuttle vise with ball screw mounted on linear...
Elk Grove Village, IL - Trusted Seller
Wellsaw Horizontal Bandsaw (Swivel-Head Miter Saw) 13" x 16" Model 1316S
- Manufacturer: Wellsaw
- Model: 1316S
Wellsaw Horizontal Bandsaw (Swivel-Head Miter Saw) 13" x 16" Model 1316S Introducing the Wellsaw Horizontal Bandsaw 1316S, a swivel-head miter saw perfect for your needs. Manufactured in 2023, it boasts brand new...
- Trusted Seller
Everett 16-MIT Cut Off Abrasive Metal Saw 16" Blade Exhaust Blower 10Hp 3210RPM
- Manufacturer: Everett
Used, in Good Working Condition, Tested. This is a working cut off saw. 16" blade. 230/460V 10 Hp main motor. Has a blower motor. 1 hp motor with a 16" centrifugal fan. Inside of cabinet is rusting through the bo...
$1,760 USDMillersburg, IN - Trusted Seller
40" throat Pehaka USF 10- Vertical Band Saw
- Manufacturer: Pehaka
Imperial Metric 40" throat Pehaka USF 10- Vertical Band Saw ** 40" throat ** Blade Welding Attachment Photo Link Specifications (Preliminary) Features a massive 40" throat for material up to 10" Thick Include...
Elk Grove Village, IL - Trusted Seller
DoALL Vertical Contour Band Saw
- Manufacturer: DoAll
“USED, IN NICE CONDITION. IT HAS RUST, SCRATCHES, WAS IN WORKING CONDITION WHEN TAKEN OUT OF SERVICE. SEE PICTURES ATTACHED” DoALL Vertical Contour Band Saw DoALL Vertical Contour Band Saw The DoALL Vertical Cont...
Vertical Tiltable Head Double Miter Band Saw
- Manufacturer: Baxter Verticut
- Model: 500MV
VERTICUT 500MV Cuts up to 18" wide x 25" high stuctural beams or 18" diameter pipe. VERTICUT 360MVC Cuts up to 14" wide x 17" high stuctural beams or 14" diameter pipe (12" at 45°). Verticut: The sawing head o...
Chicago, IL- Trusted Seller
Tannewitz U Woodworking Miter Table Saw 20" Blade 5hp 230/460V Tilting Arbor
- Manufacturer: Tannewitz
Tested in good working condition Top is 35" off the ground Metal top size 42.5x37" plus a 30x25" addon Adjustable fence. Vintage type but works good. 5 hp motor For a 20" blade. Has only a 14" blade. 230/460 volt...
$2,800 USDMillersburg, IN - Trusted SellerAuction
Wilton Horizontal Band Saw
- Manufacturer: Wilton
Wilton Horizontal Band Saw Model 3535. This horizontal band saw is retired from our Maintenance Department. This is a used piece of equipment that may be missing parts. No service records are available on this pi...
Dallas, GAVisit Auction Website - Trusted Seller
Razorgage GlideRule Chop Saw Station
- Manufacturer: OMGAOMGAOMGAOMGAOMGARazorGageRazorGageRazorGageRazorGage
Customizable Saw Stop The GlideRule Chop Saw Station is an economical material stop that offers many of the advantages of the expensive motor driven stops. What sets GlideRule apart is the method for adjusting th...
Montoursville, PA - Trusted Seller
Baileigh BS-20M-DM Dual Mitering Band Saw
- Manufacturer: Baileigh
- Model: BS-20M-DM
Baileigh BS-20M-DM Dual Mitering Band Saw The manual BS-20M-DM dual miter band saw offers hydraulic descent, a roller infeed, and a material stop for efficiency. With its steel frame, the saw will last for many y...
Amada CM-75 Saw
- Manufacturer: Amada
- Model: CM-75
Good condition Amada CM-75 Saws manufactured in 2005. Located in USA and other countries. Click request price for more information.
USA
Tip: Enter manufacturer, model or keyword
