Building Filters

Used Ideco Construction in USA

Trusted Seller
1984 IDECO H35 Work Over Rig
- Manufacturer: Ideco
1984 Ideco H35 Work Over Rig, Refurbished in 2007. 103' Mast, 250K Capacity, Detroit Series 60 Diesel Engine, Allison Transmission, 1 inch line, 6 lines.
Illinois, USA
IDECO T16 #14657
- Manufacturer: Ideco
gas deck engine, mounted on 1971 International 1800 with gas engine, 3 line machine, bailer, mechanical clutches, 3 hyd leveling jacks, tools, 400’ of 3/4'” cable Price: $27,000 - Maine
$27,000 USD
Get financing
Est. $508/mo
Oceanside, NY
IDECO DRILLING RIG #8194T
- Manufacturer: Ideco
IDECO 525 drawworks powered by (2) Cat 3408 engines with torque converters, 132’ x 500,000# derrick with 5 sheave 250 ton 1-1/8” groove shorty hook, 10’ box on box substructure with 4’ poney, 18-1/2” rotary, (2) ...
$375,000 USD
Get financing
Est. $7,058/mo
Oceanside, NY
Trusted Seller
Ideco T-800 Triplex Mud Pump
- Manufacturer: Ideco
Ideco T-800 triplex mud pump, 7 X 9‚Äù stroke, powered by Cat D398, 5,000 psi fluid ends, centrifugal prime pump, pulsation dampener. 6230 hours
Maysville, OK
IDECO H44 DRILL RIG #3981T
- Manufacturer: Ideco
Drive in, rated to 6500’ with 4-1/2” drill pipe, (2) Detroit 871 engines (305 hp each), Ideco 108’ x 268,000# mast, 12’ H telescoping substructure, Dreco 150 ton block, ZP 17-1/2” x 44” rotary table, V-door catwa...
$215,000 USD
Get financing
Est. $4,046/mo
Oceanside, NY
IDECO H44 DRILL RIG #3977T
- Manufacturer: Ideco
1000 hp trailer mounted drill rig, (2) Detroit 60 Series engines 475 hp each @ 1800 rpm, 117’ x 450,000# derrick, 17’ adjustable substructure, Century 17-1/2” x 44” rotary tble, National 160 ton Shorty block, V d...
$275,000 USD
Get financing
Est. $5,176/mo
Oceanside, NY
IDECO H35 RAMBLER SERVICE RIG #11674Tc
- Manufacturer: Ideco
- Model: Rambler
- Horsepower: 1,000 hp
- Hook load: 25.27 t
95’ x 212,000# Ideco telescoping derrick, 42 x 10 double drum drawworks, 100 ton McKissick block and hook, hydromatic, tubing board, monkey board, catwalks, railings, stairs, lights, ladders, mounted on 4 axle ca...
$137,500 USD
Get financing
Est. $2,588/mo
Oceanside, NY
Trusted Seller
2007 NOV Ideco E 3000
- Manufacturer: Ideco
Ideco Model E-3000 Drawworks, single drum, rated up to 4000 HP. Refurbished in 2007. Can also be dismantled for spare parts. Drawworks was originally furnished with 3 each GE752 Motors and a Elmagco 7838 Brake. T...
Houston, TX
IDECO DRAWWORKS, MODEL E-1200, 1200-HP
- Manufacturer: Ideco
- Horsepower: 1,200 hp
Manufactured in 2006 Last drilled in 2019 (Only stacked due to corona virus pandemic) Safety Features: Equipped with an MD Totco Total Block Control System for enhanced operational safety Catheads: Varco HC-26 H...
The Woodlands, TX
Item 0524 : 2004 IDECO DRILLING UNIT 1000 HP
- Manufacturer: Ideco
- Hook load: 162.39 t
IDECO H-1000E DRILLING UNIT 1000 HP (Mounted on 3-Axle Trailer) A. DRILL RIG : IDECO H1000 LAND DRILLRIG – 1000HP Description: Serial No. Mast: 4-736-012B-409 – Mast: 117‘ H, SHL Telescoping Mast – Drillin...
Texas, USA
1981 Ideco-Hall Workover Drilling Rig
- Manufacturer: Ideco
1981 Hall/Ideco Workover Rig / Well Service Rig. - Detroit Series 60 Engine - Double 97' Crown - 180,000 lb pull - High and low clutch - 100-Ton weighted block - 7,500’ sand line - Fully refurbished in 2022 - Re...
$95,000 USD
Get financing
Est. $1,788/mo
Bakersfield, CA
IDECO 2500 Drilling Rig
- Manufacturer: Ideco
IDECO 2500-E Diesel Electric Drilling Rig -Pyramid Low Lift Cantilever Mast, 158ft clear height 30ft base,600ton, Crown Block for 1.5" line, racking board, -Ideco 525 Block w/ HK525 cushioned triplex hook -Box on...
Hayward, CA
Ideco Full View Mast
- Manufacturer: Ideco
Ideco Full View Mast Height 143’ Base 24’ to API 4E Crown Block National 7 sheave: 6-60” cluster sheaves: (1) 60” fastline API static hook load: 8parts 750K 10parts 825K 12parts 1310K
Hayward, CA
IDECO SUPER 7-11 ELECTRIC SCR DRILLING RIG #14179T
- Manufacturer: Ideco
Converted to electric rig in 1981, rig last drilled in 1981, 1700 hp drawworks, Ideco FM 143-650-24 mast with 750,000# hook load, Ideco UTB-525-6-50 525 ton travelling block, 29’ Ideco box on box substructure, (2...
$3,150,000 USD
Oceanside, NY
IDECO H44-CSD RAMBLER AND H37 BACK IN DRILLING RIG PACKAGE ( #13044R
- Manufacturer: Ideco
- Model: Rambler
- Horsepower: 1,000 hp
- Hook load: 25.27 t
Includes: 700 HP IDECO H44-CSD RAMBLER DRILLING RIG Manufactured 1983, Model #DIR706SBS, mounted on a 6 axle carrier w/ H-44 CSC drawworks, Parkersburg 22 in. hydromatic brake, (2) 3406 Cat motors w/Allison torqu...
$190,000 USD
Get financing
Est. $3,576/mo
Oceanside, NY
Ideco Rambler Drilling Rig
- Manufacturer: Ideco
- Model: Rambler
Good condition Ideco Rambler Drilling Rigs available between 1968 and 1984 years. Located in USA and other countries. Click request price for more information.
USA