Used Cnc Lathes in Florida, USA

2006 Leadwell T7 CNC Turning Center
- used
- Manufacturer: Leadwell
- Model: T7
13.7" X 20.4" Turning Center with Fanuc 0iTC CNC Control, 20 HP Spindle Motor, Tool Presetter, Tailstock, Parts Catcher, Chip Conveyor and MTA International Super 80 Barfeeder Fanuc 0iTC CNC Control, 20 HP Spindl...
Lithia, FL
Trusted Seller
DMG Mori NRX2000 Twin Spindle Lathe – 2018
- used
- Manufacturer: DMG Mori
- Model: NRX 2000
Altamonte Springs, FL
Trusted Seller
Milltronics ML-26/40 Combo Lathe – 2007
- used
- Manufacturer: Milltronics
- Model: ML26/40
Altamonte Springs, FL
2012 Ganesh Cyclone-32CS CNC Turning Center
- used
- Manufacturer: Ganesh
1.25” X 11.6” CNC Turning Center Ganesh CNC Control, ASCI Smoke Hog and a Chip Conveyor. Main Spindle Sub Spindle Ganesh CNC Control, ASCI Smoke Hog and a Chip Conveyor.
Lithia, FL
2022 Haas ST-25Y CNC Turning Center
- used
- Manufacturer: Haas
- Model: ST-25Y
13” X 22.5” CNC Turning Center with Haas NextGen Control, Main Spindle C - Axis, A2-5 Finishing Sub-Spindle, Early Power Failure Detection Module, Haas Connect, Rigid Tapping, High-Pressure Coolant, Automatic Too...
Lithia, FL
2022 Multicam APEX3R CNC Router
- used
- Manufacturer: MultiCam
4’ X 8’ CNC Router with MultiTool Easy Control, AC Servo System, HSD 5.5 HP Spindle, Automatic Linear Tool Changer, 7 HP 2-Stage Vacuum Pump w/ Regenerative Blower, Multivision Pro Camera System and Laser Pointer...
Lithia, FL
2017 Nanxing NCG2512 CNC Router
- used
- Manufacturer: Nanxing
4’ X 8’ CNC Router with SAI Open CNC Control, HSK63 Spindle, Air Blast, Auto Unload, Vacuum Pump, Auto Grease lubrication System and Bottom Dust Extraction at Front Edge of Table. SAI Open CNC Control, HSK63 Spin...
Lithia, FL
2008 Multicam 3-204R CNC Router
- used
- Manufacturer: MultiCam
5’ X 10’ Router with Multicam CNC EZ Controller, 6 Position Linear Tool Changer, 5 HP Vacuum Pump, T - Slotted Table and Step Motor. Multicam CNC EZ Controller, 6 Position Linear Tool Changer, 5 HP Vacuum Pump, T...
Lithia, FL
2022 FOM Argo 70 CNC Router
- used
- Manufacturer: FOM
350” X 43” CNC Router with Omega 200 Touchscreen with FOM CAM 3D and Geometrics, 12 Position Toolchanger, (8) Pneumatic Vises and Pendular Machining. Omega 200 Touchscreen with FOM CAM 3D and Geometrics, 12 Posit...
Lithia, FL
2019 Laguna SS-M2-510 CNC Router
- used
- Manufacturer: Laguna
5’ X 10’ CNC Router with Syntech CNC Control System, 8 - Position Automatic Tool Changing System and Multi-Zone Vacuum Table. Syntech CNC Control System, 8 - Position Automatic Tool Changing System and Multi-Zone...
Lithia, FL
2018 Tsugami S205 Swiss CNC Turning Center
- used
- Manufacturer: Tsugami
- Model: S205
Bar capacity: 20 mm | Max. machining length: 8.2” | Main spindle indexing: Full C-Axis | Main spindle speed: 10,000 RPM | Back spindle indexing: Full C-Axis | Back spindle speed: 10,000 RPM | Total tool capacity...
Lithia, FL
Trusted Seller
Nakamura-Tome WY250L Super Mill- 2014
- used
- Manufacturer: Nakamura
Altamonte Springs, FL
2003 Ganesh GT-2050 CNC Lathe
- used
- Manufacturer: Ganesh
18.9” X 49.2” Lathe with Fagor 8055 CNC Controls, Foot Pedal, Hydraulic Chuck, 8 - Station Turret and MT#5 Tailstock. Fagor 8055 CNC Controls, Foot Pedal, Hydraulic Chuck, 8 - Station Turret and MT#5 Tailstock.
Lithia, FL
2012 Haas ST-30 CNC Lathe
- used
- Manufacturer: Haas
- Model: ST-30
31.5” X 26” CNC Lathe with Haas CNC Control, Automatic Tool Presetter, Bolt-On Style Turret, Belt-Type Chip Conveyor and Rigid Tapping. Haas CNC Control, Automatic Tool Presetter, Bolt-On Style Turret, Belt-Type ...
Lithia, FL
2013 Okuma Genos L400 CNC Lathe
- used
- Manufacturer: Okuma
- Model: GENOS L400
15.35” X 19.68” CNC Lathe with OSP-P200L-R CNC Control, A2-8 Spindle Nose, Chip Conveyor and All Available Manuals. OSP-P200L-R CNC Control, A2-8 Spindle Nose, Chip Conveyor and All Available Manuals.
Lithia, FL
Victor 1860S CNC Lathe
- used
- Manufacturer: Victor
- Model: 1860S
Good condition Victor 1860S CNC Lathes. Located in USA and other countries. Click request price for more information.
USA