Used Inductotherm in Wallonia, Belgium

Induction furnace INDUCTOTHERM 3 x 6t

• Manufacturer: Inductotherm

With control 5140kVA; 4500kW; 200Hz With 2 transformers Primary voltage: 10500V; Secondary voltage: 595V; 50Hz; 2570kVA Melting and holding warm possible at the same time With loading machines With water pump sta...

Induction furnace INDUCTOTHERM VIP350, 500 kg

• Manufacturer: Inductotherm

Internal dimensions (without refractory): Depth: 730mm; Ø620mm With hydraulic unit Without cooling tower With water pump With 2 crucibles for alternative working With copper rails One crucible without lining

2006 Induction furnace INDUCTOTHERM 2 x 3t

• Manufacturer: Inductotherm

With pump station for control cabinet and furnaces as well as overflow station With hydraulic station and control panel With 2 furnace chairs with a capacity of 3 tonnes per furnace With pneumatic ejector for ref...

Induction furnace INDUCTOTHERM 12t; 9MW

• Manufacturer: Inductotherm

With VIP Power Track control system Furnace on load cells With Meltminder 300 With 1 loading chute With hydraulic unit With 2 water pump stations WITHOUT cooler WITHOUT transformer With hydraulic ejector With flo...

Induction furnace INDUCTOTHERM 3+5t; 2250kW

• Manufacturer: Inductotherm

With 2 furnace bodies: With power cabinet POWER TRACK VIP 600V With control panel With 1 power isolation transformer With open cooling tower MITA With hydraulic unit With water pumping station and heat exchanger ...

Induction furnace INDUCTOTHERM 20t and 25t

• Manufacturer: INDUCTOTHERM Power Trac

With 2 water pump stations (for furnace and control cabinet) With 2 cooling towers (closed cooling circuits) With 1 hydraulic unit with separate pumps With 1 ABB transformer With 1 control cabinet for both furnac...

Induction melting furnace INDUCTOTHERM, 250 kg

• Manufacturer: Inductotherm

With 2 furnaces for alternativ working With transformer With hydraulic With cooling tower With water pump With control board

Induction furnace INDUCTOTHERM 200 kg, push-out

- 1x VIP power desk - 1x pump station with 2 pumps - 1x cooling tower and spare cooling tower - crucible manipulation system - smoke suction measurement and recorder

1993 Induction furnace INDUCTOTHERM Dual Trak 2 x 2t

• Manufacturer: Inductotherm

With hydraulic unit With water pumping station With switch cabinet VIP ( 3404 x 2278 x H 2032mm) With 2 furnace chairs, each 2 tonnes capacity With hydraulic ejector With transformer (pri. 21.000V; sec. 598V) 150...

1988 Induction furnace INDUCTOTHERM VIP250, 350 kg

• Manufacturer: Inductotherm

With hydraulic groupe With 2 furnace bodies, 350 kg each With control panel With control cabinet VIP250 With 2 temperature measuring lances and digital wall display With transformer With water pumps and cooler KE...

Induction furnace , 500 kg, 1000 Hz, INDUCTOTHERM

• Manufacturer: Inductotherm

Furnace, condenser, hydraulics, switchgear cabinet Cabinet VIP Powertrac, type 300, ENGINE: 300 kW, entrance cabinet 345 KVA, 50 cycles per second of 380 V, 800A, from 1983 This furnace is on a two-carrier crane...

1999 Induction furnace INDUCTOTHERM, 15 t (warm holding)

Power: 1000 kW, frequency: 300 Hz Consisting of: 1 furnace 1 transformer 1 hydraulic unit 1 cooling station composed from water pumps and heat exchanger with out cooling tower 1 capacitor rack 1 pushout cylinder...

2000 Push-out furnace INDUCTOTHERM, 200 kW, 1000 Hz, 200 kg

One push-out for crucible 200 kg, type A200 1x VIP power desk and power track, type R 1x pump sttaion 1x cooling tower with closed circuit With hydraulic ( with non flammable oil substitut ) push and emergency ha...

1998 Induction furnace INDUCTOTHERM, 250 kg, 150 kW, 1000 Hz

Dimensions: - control board: length 1900 mm, width 770 mm, height 2000 mm - furnace body: length 1600 mm, width 1400 mm, height 1400 mm - cooling system: length 2000 mm, width 1200 mm, height 850 mm One body with...