Used processing equipment

Newbury Industries 30 Ton Injection Molding Press

2 units available! Newbury Industries 30 Ton Injection Molding Press Model V3-30RS 2 units available Both came out of service working 3 Phase 60Hz 460 V Weight approx. 6500 lbs Sold as-is where-is

Husky H-C6-1-NEO2-8 Altanium Neo2 Injection Molding System

• Manufacturer: Husky

“Used” Model number: H-C6-1-NEO2-8 | Model line: ALTANIUM NEO2 | Mpn: H-C6-1-NEO2-8 | Shipping weight: 320 lbs | Shipping dimensions: 64 x 39 x 27 in | Reference sku: 928955

45 Ton Battenfeld Injection Molder, Model 45/200/02/08/6/20

• Manufacturer: Battenfeld
• Model: 452000208620

45 Ton Battenfeld Injection Molder, Model 45/200/02/08/6/20 Used Battenfeld injection molder, model 45/200/02/08/6/20, 45 ton clamp force, 16" x 16" platen, 10" x 10" mold area with mold, Unilog 3000 controls, 46...

39 Ton Arburg Injection Molder, Model 220-90-350

• Manufacturer: Arburg
• Model: 220-90-350

39 Ton Arburg Injection Molder, Model 220-90-350 Used 39 ton Arburg injection molder, type All Rounder, model 220-90-350, with control panel with Sterlco mold temperature controllers, Arburg serial# 128422, built...

85 Ton Battenfeld Injection Molder, Model BK850/200

• Manufacturer: Battenfeld
• Model: BK850200

85 Ton Battenfeld Injection Molder, Model BK850/200 Used 85 ton Battenfeld horizontal injection molder, model BK850/200, maximum platen opening of 12", maximum opening stroke (adjustable) 13.8", with Unilog 4000 ...

1993 Van Dorn 300 RS-30F-HT

• Manufacturer: Van Dorn Demag
• Model: 300RS30F

300 Ton 30 oz 230 Volt / 3 Phase / 60 Hz Machine type: Injection Molding Machines | Machine location: Florida | Stock #: 920162

2002 Van Dorn 500SP2800

• Manufacturer: Van Dorn Demag

Equipment Overview This 2002 Van Dorn Demag 500SP2800 is capable of consistent, high-volume PET preform or industrial molding. Its 1,676 g shot capacity significantly exceeds your 960 g requirement, and the large...

Engel 5550/550 Servo Driven Injector Duo Injection Molding Machine 550 Ton

• Manufacturer: Engel

Used, in Good Working Condition. Removed From a Working Environment. Injection molding machine partout. Servo Driven Injector Oswald FOD16.3W B5-75kw 1667-000005c For a 550 ton injection molding machine If this i...

Glycon GL17840 Feed Screw For Injection Molding Machine 4" x 105" Chrome Plated

• Manufacturer: Glycon

New surplus. 4" Screw Dia. HPM DM2 4140 Steel with Colmonoy 56 Hard Facing and Chrome Plating for the surface treatment. Approximately 105" Length. Contact us for a freight quote or set up your own. Skid size is ...

Meiki 8433279 Metering Screw for Injection Molding Machine 36mm x 1050mm 41.3"

• Manufacturer: Meiki

New surplus. 36mm Screw dia. 35mm Shaft dia. 1050mm Overall length. If this item ships as Flat Rate Freight please see details in Shipping tab

Sterlco M29412-FCX Sterltronic Thermolator Injection Molding Temperature Control

• Manufacturer: Sterlco

Used, in Good Working Condition. Removed From a Working Environment. This unit was in operation a few weeks ago. If this item ships as Flat Rate Freight please see details in Shipping tab

WJ Inc. WJ 41010 Feed Screw For Injection Molding Machine 90.MM

• Manufacturer: WJ Inc.

New surplus Approximately 90 mm diameter Approximately 82.25 inches long Contact us for a freight quote or set up your own Skid size is 24" wide 92" long 12" tall 260 lbs. If this item ships as Flat Rate Freight ...

2002 Milacron Maxima MM450

• Manufacturer: Milacron

Equipment Overview This 2002 Milacron Maxima MM450 is a 450-ton hydraulic injection molding machine integrated with a Yushin VCII‑400 Cartesian servo robot. Known for its direct-acting clamp and compact layout, t...