- Trusted Seller
36 Gal Irwin Tank, S/S
- Manufacturer: Irwin
36 Gal Irwin Tank, S/S Used 36 gallon Irwin receiver tank, stainless steel construction, dish top and bottom, rated 300 psi at 200 f, on legs, serial# 293, national board# 293, built 1972.
Cleveland, OH - Trusted Seller
IRWIN DEVELOPMENT 44-40 Mini Mag
- Manufacturer: Irwin
IRWIN inline THERMOFORMER Micro Phazer 2 controls New Controls for ovens in 2005 Lyle Trim Press 44" wide trim area 30 HP Motor Works in tandem with Irwin Thermoformer Brand new Controls included Both machines ar...
Tennessee, USA - Trusted Seller
IRWIN CHESAW 50-04
- Manufacturer: Irwin
Used Irwin Chesaw Under-Press Granulator Type CS-LH, Model 50-04 12" x 56" entry throat. 30 hp motor 230/460 volt 5 hp blower discharge and approximately 3/8" screen Depending upon material capacity on foam plast...
Valley Cottage, NY - Trusted Seller
IRWIN CHESAW 50-04
- Manufacturer: Irwin
Used Irwin 50" Chesaw under press granulator specs provided by IRWIN LITERATURE For underpress operation w/Industry Standard 50 inch Horizontal Trim Presses • Incorporates patented Irwin R&D design concepts • Pow...
Valley Cottage, NY - Trusted Seller
2015 IRWIN CS-LH 50-04
- Manufacturer: Irwin
Used Irwin Under-Press Granulator Type CS-LH, Model 50-04, new 2015. Has 12" x 56" entry throat. Driven by a 30 hp motor, 230/460 volt. Has 5 hp blower discharge and approximately 3/8" screen. Depending upon mate...
Valley Cottage, NY - Trusted Seller
IRWIN DEVELOPMENT 44-40 Mini Mag
- Manufacturer: Irwin
IRWIN inline THERMOFORMER Model: 44-40 Mini Mag Micro Phazer 2 controls New Controls for ovens in 2005 Lyle Trim Press Model: 140P2 44" wide trim area 30 HP Motor Works in tandem with Irwin Thermoformer Brand new...
Valley Cottage, NY - Trusted Seller
1991 IRWIN DEVELOPMENT 28 Mini-Mag
- Manufacturer: Irwin
Former: Irwin (1991) 28 Mini-Mag (Rblt. 2005) Max Mold Size 28" x 40" Top Ovens Quartz Panel Oven Bottom Ovens Calrod Oven Length 200" Mold Shut Height 20" (10" above / 10" below) Top 6.0" Platen Drives SWECO Ser...
Valley Cottage, NY - Trusted Seller
1991 IRWIN DEVELOPMENT 28 Mini-Mag
- Manufacturer: Irwin
28 Mini-Mag (Rblt. 2005) Max Mold Size 28" x 40" Top Ovens Quartz Panel Oven Bottom Ovens Calrod Oven Length 200" Mold Shut Height 20" (10" above / 10" below) Top 6.0" Platen Drives SWECO Servo Motors SWECO Servo...
Valley Cottage, NY 
IRWIN CHESAW CH-LH 28.7-04 GRANULATOR 12598
- Manufacturer: Irwin
Irwin Chesaw type CS-LH 28.7-04 granulator, no serial number, 5″ x 33″ rotor cutter, 15HP 208-230/460V 1,760 RPM motor through a fan cooled 10:1 gearbox. Lincoln auto-lube system, evacuated by a 4″ auger system, ...
Elk Grove Village, IL
IRWIN CHESAW CH-LH 28.7-04 GRANULATOR 12597
- Manufacturer: Irwin
Irwin Chesaw type CH-LH 28.7-04 granulator, S/N 7915, 5″ x 33″ rotor cutter, 15HP 208-230/460V 1,760 RPM through a fan cooled 10:1 gearbox. Lincoln auto-lube system, evacuated by a 5HP 208-230/460V 3,460 RPM blow...
Elk Grove Village, IL
Irwin Chesaw Granulator – Model CH-LH 28.7-04, 15 HP with Auger Discharge
- Manufacturer: Irwin
10755132 Used Irwin Chesaw Granulator; Model CH-LH 28.7-04. 5" x 33" Rotor Cutter, 15 hp, 208-230/460 volt, 1760 rpm, Fan Cooled 10:1 gearbox. Lincoln Auto-Lube System. Evacuated by a 4" Auger Discharge System. A...
Belvidere, IL
Qty SDS & jack hammer attachments to display stand & wall column including Makita, Bosch, Irwin,
- Manufacturer: Irwin
Qty SDS & jack hammer attachments to display stand & wall column including Makita, Bosch, Irwin, Amtech, Faithfull & Coreplus
York, United Kingdom
Tip: Enter manufacturer, model or keyword