Building Filters

11

Used Izumi in Hiroshima, Japan

［Izumi Food] Sanitary pump
- Manufacturer: Izumi
Power: 0.75 kw (estimated) | Material: Main section SUS | Quantity saved: 3 units
Hiroshima, Japan
2011 Izumi Environmental Engineering Vertical
- Manufacturer: Izumi
Tube: 25.4φ (2t) x 3000L x 165 tubes (SUS304) Body plate: 500φ (SGP-E)
Hiroshima, Japan
Izumi Food Machinery Vertical Cylindrical Type
- Manufacturer: Izumi
Jacket and agitator included Shower ball included Power: 1.5kw | Material: Wetted part SUS | Quantity saved: One | Size: Diameter: Approximately 2300φ Overall height: Approximately 3600H
Hiroshima, Japan
1979 Izumi Food Machinery Cylinder Vertical
- Manufacturer: Izumi
Jacket / stirrer (0.75 kw, two stirring blades) Closed type, with shower ball / manhole
Hiroshima, Japan
1990 Izumi Food Machinery W-4800-KS-R
- Manufacturer: Izumi Food Machinery Co.
14.75 m2, CLASS-NO.: APKO390 Heat transfer area: 14.75 m2 Capacity: 4800 l/h
Hiroshima, Japan
2010 Izumi Hood 13VRC-1DT-350L
- Manufacturer: Izumi
Jacketed Can be used to reduce pressure inside the can (see control panel) With control panel
Hiroshima, Japan
1997 Izumi Food Machinery HV - 5 A - 150 - 110 S
- Manufacturer: Izumi
Processing capacity: 15000 L / h Power: 110kw | Material: SUS | Quantity saved: One
Hiroshima, Japan
1997 Izumi Food Machinery NB36SS-163-6-HWW
- Manufacturer: Izumi
Plate material: SUS316 Heat transfer area: 56.52m2 13500L/h Number of plates: CH①77, CH②72, CH③14
Hiroshima, Japan
2008 Izumi Food Machinery NPW30F06-042-6-H type
- Manufacturer: Izumi
Tubes in shell-and-tube heat exchanger replaced by All welded plate & tube heat exchangers Shell and tube heat exchanger Material is under investigation
Kure, Japan
1993 Izumi Food Machinery NB13SR-001-7-W type
- Manufacturer: Izumi
Product side flow rate: 800L / Hr 100 ℃ → 50 ℃ Bore size: 25A Cooling water side: 6000L / Hr 38 ℃ ← 32 ℃ Bore: 40A Material: SUS317L (plate) Packing: NBR Please see the PDF below for specifications.
Kure, Japan
1993 Izumi Food Machinery NB13SR-001-7-W type
- Manufacturer: Izumi
Product side flow rate: 800L / Hr 100 ℃ → 50 ℃ Bore size: 25A Cooling water side: 6000L / Hr 38 ℃ ← 32 ℃ Bore: 40A Material: SUS317L (plate) Packing: NBR Please see the PDF below for specifications.
Kure, Japan