Used Bending & Forming in Lombardy, Italy

Faccin Calandra 4 Rulli 4HEL
- new
- Manufacturer: Faccin-Biko
- Model: 4HEL
Standard equipment: Straight guides for roller translation (RGS) 4 independent bearings supporting the bottom rollers (MCS) Double-width bearing seats (WHS) Electronic synchronization of roller parallelism (EPS) ...
Visano, Italy
Faccin Calandra 2 Rulli HCU
- new
- Manufacturer: Faccin-Biko
- Model: HCU
Standard equipment: Polyurethane bottom roller for perfect invitations Automatic processing cycle (about 20 seconds/piece) Special bottom roller lifting system Standard roller for minimum diameter Siemens Numeric...
Visano, Italy
2023 COMAC S1
- used
- Manufacturer: Comac
Typology: Sheet metal processing | Diam. of trees: 35 mm | Standard roller diam.: 135 mm | Speed of trees: 4.2 mm/min | No. of driving rollers: Only upper | Flat bending capacity: 50 x 8 mm | Round bending capac...
Civate, Italy
EURING CURVATRICI CM 2000 TOP2
- used
- Manufacturer: EURING CURVATRICI
Typology: Sheet metal processing | Diam. of trees: mm. 30 | Standard roller diam.: mm. 117-148 | No. of driving rollers: 2 | Weight: ≈ kg 170
Civate, Italy
2001 BPR CPD 80
- used
- Manufacturer: BPR
Typology: Sheet metal processing | Diam. of trees: 80 mm | Standard roller diam.: 290 mm | Speed of trees: 6 g/1' | No. of driving rollers: 3 | Engine: 4 kw | Ce machine: v | Encumbrances: 970x1385x1280 mm | Wei...
Civate, Italy
G.B.C. SPECIAL ALIGNMENT CLAMPS
- new
- Manufacturer: GBC
Description Internal And External Locking Pipe Clamps For Aligning Pipes And Flanges SPECIAL ALIGNMENT CLAMPS.fusion-fullwidth.fusion-builder-row-3-5 a:not(.fusion-button):not(.fusion-builder-module-control):not(...
Cazzago San Martino, Italy
1995 BLM PLAUNO
- used
- Manufacturer: BLM
Typology: Sheet metal processing | Fe pipe bending capacity ( 35 kg/mm²): Ø min. 3.5×0.7 mm - Ø max. 12×1.5 mm | Cu-al-ot annealed tube bending capacity: Ø max. 16×1.5 mm | Wire bending capacity ( r=35 kg/mm²): ...
Civate, Italy
G.B.C. SUPERBOILER T5 FLANGE
- new
- Manufacturer: GBC
Range flange Ø min. 65 max. 400 mm (2,56″ – 15,75″) Description Flange facing machine SUPERBOILER T5 FLANGE Range flange Ø min. 65 max. 400 mm (2,56″ – 15,75″).fusion-fullwidth.fusion-builder-row-6 a:not(.fusion-...
Cazzago San Martino, Italy
Mobile piston press for processing medium/large sized pieces.
- new
Lower floor - machining / Slots for T-nuts upon customer request Moving table - machining / Slots for T-nuts upon customer request Installed power 14 KW Main cylinder thrust force 200 Tons Horizontal cylinder mov...
Calcinate, Italy
Swan neck press for machining large pieces.
- new
- Manufacturer: Swan
Lower floor - machining / Slots for T-nuts upon customer request Moving table - machining / Slots for T-nuts upon customer request Installed power 14 KW Main cylinder thrust force 200 Tons Horizontal cylinder mov...
Calcinate, Italy
Press for sheet metal stamping.
- new
Open structure front protection given the low speeds Open structure rear protection given the low speeds Right side protection, open structure given the reduced speeds Left side protection, open structure given t...
Calcinate, Italy
PRESSES FOR BENDING PLATE.
- new
Open structure front protection given the low speeds Open structure rear protection given the low speeds Right side protection, open structure given the reduced speeds Left side protection, open structure given t...
Calcinate, Italy
PRESS SUITABLE FOR MOLDING AND SHEET BENDING.
- new
Open structure front protection given the low speeds Open structure rear protection given the low speeds Right side protection, open structure given the reduced speeds Left side protection, open structure given t...
Calcinate, Italy
Sheet metal bending machine 1016 mm
- new
The 1016 mm Sheet Metal Bender is a highly effective tool that bends mild metal sheets up to 1.2 mm thick, with a maximum bending angle of 120°. A must-have for any workshop. Sold with a stand. Features – Maximum...
$1,144 USD
San Paolo d'Argon, Italy
PRESS MOBILE SLIDING RAIL EXECUTION THE FIRST BENDING PIPE.
- new
- DIAMETER BETWEEN 219.1 mm. and 1219.2 mm. - THICKNESS up to: INOX 55 mm. - DUPLEX 45 mm. - SUPER-DUPLEX 35 mm. - LENGTH up to 12 mt. - Mast sliding complete with n° 6 hydraulic cylinders that allow you to close...
Calcinate, Italy